Opens in a new tab

HCPL2530SD

Dual high-speed optocoupler, 10MBd, totem-pole output, 5kVrms, SOIC-8

2971

Effective Inventory

Image for reference only

Manufacturer Part:

HCPL2530SD

Package:

SOIC-8 (5.85 x 7.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HCPL2530SD from Broadcom is a dual-channel high-speed optocoupler with totem-pole output, designed for high-speed logic interface and IPM inverter isolation at 10 MBd data rate.

Key Specifications

Manufacturer Broadcom
Channels 2
Data Rate 10 MBd
Isolation Voltage 5000 Vrms
CTR 20% min @ IF=16mA
Propagation Delay 0.5 µs max
Output Type Totem-pole
Supply Voltage 4.5V to 20V
Package SOIC-8 (SMD)
Operating Temperature -40°C to +85°C
Safety UL, CSA, VDE

Features

  • Dual-channel high-speed optocoupler
  • 10 MBd data rate
  • Totem-pole output (active pull-up)
  • 5000 Vrms isolation
  • Low propagation delay: 0.5 µs
  • Logic gate output compatible
  • UL/CSA/VDE approved

Applications

  • IPM inverter isolation
  • High-speed logic interface
  • Servo motor drive isolation
  • Switching power supply
Product Introduction: HCPL2530SD Product Introduction

The HCPL2530SD from Broadcom is a dual-channel high-speed optocoupler with totem-pole output, rated for 10 MBd data rate and 5000 Vrms isolation. The active totem-pole output provides faster switching than open-collector types, making it suitable for IPM inverter gate drive isolation. Each channel has a GaAsP LED optically coupled to an integrated photodetector with logic gate output.

Working Principle: HCPL2530SD Working Principle

Each channel uses a GaAsP LED coupled to a photodiode and amplifier IC. The photodiode detects the LED light, and the amplifier converts it to a logic output. The totem-pole output stage provides active pull-up and pull-down, enabling faster switching. The integrated detector IC includes a Schmitt trigger for clean logic transitions.

Pin Description: HCPL2530SD Pin Definition and Functions
Pin Name Function
1 Anode 1 Ch1 LED anode
2 Cathode 1 Ch1 LED cathode
3 Anode 2 Ch2 LED anode
4 Cathode 2 Ch2 LED cathode
5 VO2 Ch2 output
6 GND2 Ch2 ground
7 VO1 Ch1 output
8 VCC Output supply
Application Scenarios: In which products and applications is HCPL2530SD used
  • IPM inverter gate drive isolation
  • High-speed logic interface isolation
  • Servo motor drive signal isolation
  • Switching power supply feedback
Alternative Models: What chips are recommended as replacements for HCPL2530SD
Manufacturer Part Number Notes
Broadcom HCPL2531SD Open-collector output
TI ISO7721DR Digital isolator alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1