Opens in a new tab

MMUN2233LT1G

NPN digital transistor, 50V, 100mA, R1=4.7kΩ, R2=4.7kΩ, SOT-23

13307

Effective Inventory

Image for reference only

Manufacturer Part:

MMUN2233LT1G

Package:

SOT-23 (2.9 x 1.3 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MMUN2233LT1G from onsemi is an NPN digital transistor (BRT) with integrated 4.7kΩ base resistor and 4.7kΩ base-emitter resistor in SOT-23, simplifying circuit design.

Key Specifications

Manufacturer onsemi
Type NPN Digital Transistor (BRT)
VCEO 50V
IC 100 mA
R1 (Base Resistor) 4.7 kΩ
R2 (Base-Emitter Resistor) 4.7 kΩ
VCE(sat) 0.3V max @ IC=10mA
hFE 35 typ @ IC=10mA (with R1)
Power Dissipation 200 mW
Package SOT-23 (TO-236)
Operating Temperature -55°C to +150°C

Features

  • Built-in 4.7kΩ base resistor (R1)
  • Built-in 4.7kΩ base-emitter resistor (R2)
  • Eliminates external bias resistors
  • Direct logic-level drive
  • SOT-23 compact package
  • Pb-free, RoHS compliant

Applications

  • Digital logic interface
  • LED driver
  • Relay driver
  • Motor control pre-driver
Product Introduction: MMUN2233LT1G Product Introduction

The MMUN2233LT1G from onsemi is a bias resistor transistor (BRT) containing an NPN transistor with integrated 4.7kΩ base series resistor and 4.7kΩ base-emitter shunt resistor in a single SOT-23 package. This digital transistor eliminates external biasing components, enabling direct interface from MCU GPIO to loads such as LEDs, relays, and small motors. The 50V VCEO and 100mA IC ratings cover a wide range of low-power switching applications.

Working Principle: MMUN2233LT1G Working Principle

The BRT integrates two resistors with the NPN transistor: R1 (4.7kΩ) limits base current from a logic-level input, and R2 (4.7kΩ) provides a base-emitter discharge path for faster turn-off and noise immunity. The effective input voltage threshold is set by R1/R2 divider. A logic HIGH on the input pin forward-biases the base through R1, turning on the transistor. Logic LOW allows R2 to discharge the base-emitter junction, turning off the transistor.

Pin Description: MMUN2233LT1G Pin Definition and Functions
Pin Name Function
1 B Base input (through R1)
2 E Emitter
3 C Collector
Application Scenarios: In which products and applications is MMUN2233LT1G used
  • MCU GPIO to LED interface
  • Relay and solenoid pre-driver
  • Logic-level signal inversion
  • I/O line buffering
Alternative Models: What chips are recommended as replacements for MMUN2233LT1G
Manufacturer Part Number Notes
onsemi MMUN2211LT1G 10kΩ/10kΩ resistors
Nexperia PBSS4140T,215 Digital transistor
Rohm DTA114ECA PNP equivalent

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1