Opens in a new tab

MCP602T-E/ST

Dual 2.8MHz CMOS op-amp, RRIO, AEC-Q100, 2.7-6V, TSSOP-8

5339

Effective Inventory

Image for reference only

Manufacturer Part:

MCP602T-E/ST

Package:

TSSOP-8 (3.0 x 4.4 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP602T-E/ST from Microchip Technology is a dual 2.8MHz CMOS operational amplifier with rail-to-rail output in an 8-pin TSSOP package. With 2.7V to 6V supply, 2mV max offset, 230uA per-channel quiescent current, and AEC-Q100 qualification, it is optimized for automotive and industrial signal conditioning.

Key Specifications

Channels 2 (dual)
Gain-Bandwidth Product 2.8 MHz
Slew Rate 2.3 V/us
Input Offset Voltage 700 uV typical, 2 mV max
Input Bias Current 1 pA typical
Supply Voltage 2.7V to 6.0V
Quiescent Current 230 uA/channel (typical)
Output Type Rail-to-Rail Output
CMRR 75 dB min
PSRR 80 dB min
Operating Temperature -40 to +125 C (E suffix)
Qualification AEC-Q100
Package TSSOP-8

Features

  • Dual CMOS operational amplifier
  • 2.8MHz gain-bandwidth product
  • Rail-to-rail output swing
  • 2.7V to 6V single supply operation
  • 1pA ultra-low input bias current
  • 2mV maximum input offset voltage
  • 230uA per-channel quiescent current
  • Extended temperature: -40 to +125C
  • AEC-Q100 automotive qualified
  • Unity-gain stable

Applications

  • Automotive sensor signal conditioning
  • Battery-powered instrumentation
  • Industrial process control
  • Portable audio equipment
Product Introduction: MCP602T-E/ST Product Introduction

The MCP602T-E/ST from Microchip Technology is a dual 2.8MHz CMOS operational amplifier with rail-to-rail output in an 8-pin TSSOP package. The E suffix denotes extended industrial temperature range (-40 to +125C) with AEC-Q100 automotive qualification. The T suffix indicates tape and reel packaging. With 2.7V to 6V supply range, 230uA per-channel quiescent current, and 1pA typical input bias current, it is optimized for low-power battery-operated and automotive applications requiring precision signal conditioning. The rail-to-rail output stage swings within millivolts of both supply rails under light loads, maximizing dynamic range in single-supply applications. The 2.8MHz GBW and 2.3V/us slew rate make it suitable for active filters and signal conditioning at moderate frequencies.

Working Principle: MCP602T-E/ST Working Principle

The MCP602 operates through three circuit stages per channel: (1) CMOS Differential Input: A PMOS differential pair provides the input stage with 1pA typical input bias current and 2mV maximum offset voltage. The input common-mode range extends from VSS to VDD-1.2V (not rail-to-rail input). (2) Gain Stage: A high-gain CMOS stage with internal compensation provides 2.8MHz GBW and 2.3V/us slew rate with unity-gain stability. The 115dB typical open-loop gain ensures accuracy in closed-loop applications. (3) Rail-to-Rail Output: A Class AB CMOS output stage swings to within approximately 10mV of both supply rails under light load (<10kOhm), and within 50mV under 25kOhm load. The 22mA output current capability can drive moderate loads directly. The output does not phase reverse when overdriven beyond the input common-mode range.

Pin Description: MCP602T-E/ST Pin Definition and Functions
Pin Name Type Description
1 VOUTA Output Channel A output
2 VINA- Input Channel A inverting input
3 VINA+ Input Channel A non-inverting input
4 VSS Power Negative supply / Ground
5 VINB+ Input Channel B non-inverting input
6 VINB- Input Channel B inverting input
7 VOUTB Output Channel B output
8 VDD Power Positive supply (2.7-6V)
Application Scenarios: In which products and applications is MCP602T-E/ST used
  • Automotive sensor conditioning with AEC-Q100 qualification and -40 to +125C extended temperature
  • Battery-powered instrumentation with 230uA/ch quiescent current and rail-to-rail output at 3.3V
  • Active filter stage with 2.8MHz GBW and 1pA input bias for high-impedance sensor interface
  • Portable audio preamplifier with 0.2% low THD and rail-to-rail output maximizing dynamic range
Alternative Models: What chips are recommended as replacements for MCP602T-E/ST
Model Manufacturer GBW Iq/ch Notes
MCP602T-I/SN Microchip 2.8MHz 230uA SOIC-8, -40 to 85C
MCP6024T-E/ST Microchip 10MHz 1mA Quad, higher speed
OPA2314AIDGKR TI 3MHz 150uA Pin-compatible, RRIO
LMV358IDGKR TI 1MHz 100uA Lower cost, slower

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1