Opens in a new tab

Home » Integrated Circuits ICs, Sensors » ACS713ELCTR-30A-T

ACS713ELCTR-30A-T

30A Hall current sensor, 2.1kV isolation, 133mV/A, 80kHz, SOIC-8

5860

Effective Inventory

Image for reference only

Manufacturer Part:

ACS713ELCTR-30A-T

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ACS713ELCTR-30A-T from Allegro MicroSystems is a Hall-effect-based linear current sensor IC with 2.1kVRMS galvanic isolation and integrated 1.2mOhm conductor in an 8-pin SOIC package. With 0-30A DC measurement range, 133mV/A sensitivity, and 80kHz bandwidth, it provides isolated current sensing for motor control and power management.

Key Specifications

Measurement Range 0 to 30 A (DC)
Sensitivity 133 mV/A (typical)
Isolation Voltage 2.1 kVRMS (pins 1-4 to 5-8)
Conductor Resistance 1.2 mOhm (typical)
Bandwidth 80 kHz
Output Rise Time 5 us
Total Output Error 1.5% at TA=25C
Supply Voltage 5V (4.5 to 5.5V)
Supply Current 13 mA max
Operating Temperature -40 to +85 C
Package SOIC-8

Features

  • Hall-effect-based galvanically isolated current sensor
  • 2.1kVRMS isolation voltage
  • 1.2mOhm ultra-low internal conductor resistance
  • 0-30A DC current measurement range
  • 133mV/A sensitivity with ratiometric output
  • 80kHz bandwidth with FILTER pin for noise control
  • 1.5% total output error at 25C
  • Factory-trimmed for accuracy
  • Nearly zero magnetic hysteresis
  • 5us fast output response time

Applications

  • Motor control and load management
  • Switch-mode power supply current monitoring
  • Overcurrent fault protection
  • Battery charge/discharge monitoring
Product Introduction: ACS713ELCTR-30A-T Product Introduction

The ACS713ELCTR-30A-T from Allegro MicroSystems is a fully integrated Hall-effect-based linear current sensor IC with 2.1kVRMS galvanic isolation in an 8-pin SOIC package. The ELCTR suffix denotes the SOIC-8 package with tape and reel. The 30A indicates the optimized measurement range of 0 to 30A DC (unidirectional). The device features an internal 1.2mOhm copper conductor that carries the sensed current, generating a magnetic field detected by a chopper-stabilized BiCMOS Hall IC. The 133mV/A sensitivity means the output voltage increases by 133mV for each ampere of current, with a quiescent output of VCC/2 (2.5V at 5V supply) at zero current. The 2.1kVRMS galvanic isolation between the current path (pins 1-4) and signal pins (pins 5-8) eliminates the need for opto-isolators. Factory-trimmed for 1.5% accuracy at 25C, the ACS713 requires no external calibration.

Working Principle: ACS713ELCTR-30A-T Working Principle

The ACS713 operates through four subsystems: (1) Current Conductor: A thick copper conductor integrated into the leadframe carries the sensed current from pins 1-2 to pins 3-4. The 1.2mOhm resistance minimizes power dissipation (only 36mW at 30A full-scale). The conductor thickness allows survival at up to 5x overcurrent (150A) for transient conditions. (2) Hall Sensor: A precision Hall-effect transducer located near the conductor surface converts the magnetic field generated by the current into a proportional voltage. The close proximity of the Hall element to the conductor optimizes accuracy and minimizes sensitivity to external magnetic fields. (3) Signal Conditioning: A chopper-stabilized BiCMOS amplifier provides low offset voltage and high accuracy. The output is ratiometric to the supply voltage, meaning the quiescent output voltage and sensitivity both scale with VCC. The FILTER pin allows connection of an external capacitor to reduce bandwidth and noise. (4) Isolation Barrier: The copper conductor path (pins 1-4) is electrically isolated from the signal path (pins 5-8) by 2.1kVRMS, providing galvanic isolation without opto-isolators.

Pin Description: ACS713ELCTR-30A-T Pin Definition and Functions
Pin Name Type Description
1-2 IP+ Power Current conductor input (positive terminal)
3-4 IP- Power Current conductor output (negative terminal)
5 GND Power Ground
6 FILTER Analog External filter capacitor (to GND for noise reduction)
7 VIOUT Output Analog output voltage proportional to current
8 VCC Power 5V supply voltage
Application Scenarios: In which products and applications is ACS713ELCTR-30A-T used
  • Motor controller DC current sensing with 2.1kV galvanic isolation and 1.2mOhm low-loss conductor
  • Switch-mode power supply output current monitoring with 133mV/A sensitivity and 80kHz bandwidth
  • Battery charge/discharge current measurement with ratiometric output and 1.5% accuracy
  • Overcurrent fault protection with 5us fast response time and FILTER pin for noise management
Alternative Models: What chips are recommended as replacements for ACS713ELCTR-30A-T
Model Manufacturer Range Isolation Notes
ACS713ELCTR-20A-T Allegro 0-20A 2.1kV 185mV/A, lower range
ACS712ELCTR-30A-T Allegro +/-30A 2.1kV Bidirectional version
ACS724LLCTR-30AB Allegro +/-30A 2.5kV Improved accuracy
INA240A1DR TI Shunt No Non-isolated, high CMRR

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1