Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » IS61LV25616AL-10TLI

IS61LV25616AL-10TLI

4Mbit (256Kx16) async SRAM, 10ns, 3.3V, TSOP-44 industrial

18226

Effective Inventory

Image for reference only

Manufacturer Part:

IS61LV25616AL-10TLI

Package:

TSOP-II 44-pin (18.52 x 10.29 x 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IS61LV25616AL-10TLI from ISSI (Integrated Silicon Solution) is a 4Mbit (256K x 16-bit) high-speed asynchronous CMOS static RAM with 10ns access time in a 44-pin TSOP-II package. Operating at 3.3V with low power consumption, it provides fast scratchpad memory for embedded processors and industrial systems.

Key Specifications

Organization 256K x 16 bits (4 Mbit)
Access Time 10 ns
Supply Voltage 3.135V to 3.6V (3.3V nominal)
Active Power 150 mW typical
Standby Power 10 mW typical (CMOS inputs)
Active Current 110 mA max
Interface Parallel asynchronous
Byte Control UB (upper) and LB (lower) byte
Data Retention 2.0V minimum
Operating Temperature -40 to +85 C (Industrial)
Package TSOP-II 44-pin (18.52 x 10.29 mm)

Features

  • 10ns high-speed access time
  • 3.3V low-voltage operation
  • Fully static operation (no clock/refresh)
  • Upper and lower byte control (UB/LB)
  • Chip enable (CE) and output enable (OE)
  • Low active power: 150mW typical
  • Data retention at 2.0V
  • Industrial temperature range

Applications

  • CPU cache memory
  • Embedded processor scratchpad
  • Industrial control buffering
  • Network switch forwarding table
Product Introduction: IS61LV25616AL-10TLI Product Introduction

The IS61LV25616AL-10TLI from ISSI is a 4Mbit (256K x 16-bit) high-speed asynchronous CMOS static RAM in a 44-pin TSOP-II package. The LV suffix denotes 3.3V low-voltage operation, AL denotes the high-speed low-power variant, 10 indicates 10ns access time, TL denotes TSOP-II package, and I denotes industrial temperature range (-40 to +85C). The device uses ISSI’s high-performance CMOS technology to achieve 10ns access time with only 150mW typical active power consumption. The 16-bit data bus with upper byte (UB) and lower byte (LB) enables supports byte-wise or word-wise access. Fully static operation requires no clock or refresh, simplifying system design. Chip enable (CE) and output enable (OE) inputs facilitate memory expansion. The device enters low-power standby mode when CE is deasserted with CMOS input levels, reducing power to 10mW typical.

Working Principle: IS61LV25616AL-10TLI Working Principle

The IS61LV25616AL operates as a standard asynchronous SRAM: (1) Read Cycle: The address is presented on A0-A17, CE and OE are asserted low, and UB/LB select the byte(s). After the access time (10ns), data appears on I/O0-I/O15. No clock is required; the operation is fully static. (2) Write Cycle: The address is presented, CE and WE are asserted low, and UB/LB select the byte(s). Data on the I/O pins is written into the selected location. Write can be controlled by CE, WE, or UB/LB signals. (3) Standby: When CE is high, the device enters standby mode. With CMOS input levels (VIN at VDD or VSS), standby power drops to 10mW typical. Data is retained as long as VDD is above 2.0V. (4) Byte Control: The UB and LB pins independently enable the upper byte (I/O8-I/O15) and lower byte (I/O0-I/O7), allowing byte-wise operations on the 16-bit bus. Both bytes can be accessed simultaneously for word operations.

Pin Description: IS61LV25616AL-10TLI Pin Definition and Functions
Pin Group Count Type Description
A0-A17 18 Input Address inputs
I/O0-I/O15 16 I/O Data bus (bidirectional)
CE 1 Input Chip enable (active low)
OE 1 Input Output enable (active low)
WE 1 Input Write enable (active low)
UB 1 Input Upper byte enable (active low)
LB 1 Input Lower byte enable (active low)
VDD/VSS 5 Power 3.3V supply and ground
Application Scenarios: In which products and applications is IS61LV25616AL-10TLI used
  • Embedded processor scratchpad RAM with 10ns access, 16-bit bus, and 3.3V supply
  • Industrial PLC data buffer with byte-wise access via UB/LB and 4Mbit capacity
  • Network switch forwarding table with 150mW low active power and CE-based power management
  • Battery-backed SRAM with 2.0V data retention and 10mW CMOS standby power
Alternative Models: What chips are recommended as replacements for IS61LV25616AL-10TLI
Model Manufacturer Size Speed Notes
CY62167EV30LL-55ZXI Infineon 4Mbit 55ns Very low power
AS6C1616-55TIN Alliance 4Mbit 55ns Lower speed alternative
IS61WV25616BLL-10TLI ISSI 4Mbit 10ns Very low power version
HM62V1616ILTT-10 Renesas 4Mbit 10ns Pin-compatible

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1