Opens in a new tab

DRV8880PWPR

45V 2A stepper driver, smart tune, 1/16 ustep, HTSSOP-28

8576

Effective Inventory

Image for reference only

Manufacturer Part:

DRV8880PWPR

Package:

HTSSOP-28 PowerPAD (9.7 x 4.4 x 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DRV8880PWPR from Texas Instruments is a 45V, 2A bipolar stepper motor driver with smart tune auto-tuning, 1/16 microstepping, and STEP/DIR interface in a 28-pin HTSSOP PowerPAD package. It integrates two N-channel MOSFET H-bridges with adaptive blanking time for smooth stepping performance.

Key Specifications

Operating Voltage 6.5V to 45V
Full-Scale Current 2.0A per bridge
RMS Current 1.4A (with proper PCB, 24V, 25C)
RDS(ON) HS+LS ~500 mOhm typical
Microstepping Up to 1/16 step
Interface STEP/DIR
Decay Modes Smart Tune, Mixed, Slow, Fast
Off-Time PWM 10, 20, or 30 us configurable
LDO Output 3.3V, 10mA
Sleep Current 28 uA
Protection UVLO, OCP, TSD, Charge Pump UV
Fault Output nFAULT (active low)
Operating Temperature -40 to +125 C
Package HTSSOP-28 PowerPAD (9.7 x 4.4 mm)
Status NRND (PWP) / Active (PWPR)

Features

  • Smart Tune auto-tuning for optimal current regulation
  • Up to 1/16 microstepping with non-circular half-step mode
  • 6.5-45V wide operating voltage range
  • Adaptive blanking time for smooth stepping
  • Configurable off-time PWM chopping
  • 3.3V, 10mA LDO for external logic
  • 28uA low-power sleep mode
  • Comprehensive protection: UVLO, OCP, TSD, charge pump UV

Applications

  • ATM and money handling machines
  • Security cameras (PTZ)
  • 3D printers and scanners
  • Factory automation and robotics
Product Introduction: DRV8880PWPR Product Introduction

The DRV8880PWPR from Texas Instruments is a 45V, 2A bipolar stepper motor driver in a 28-pin HTSSOP PowerPAD package. The PWP denotes the HTSSOP-28 PowerPAD package, and R denotes tape and reel (2000 pcs/reel). The device integrates two N-channel MOSFET H-bridge drivers with a microstepping indexer controlled via simple STEP/DIR interface. Smart Tune (formerly AutoTune) automatically adjusts the decay profile for optimal current regulation without manual tuning, compensating for motor variation and aging. The device supports up to 1/16 microstepping with non-circular half-step modes for smoother motion. The configurable off-time PWM chopping (10/20/30us) and adaptive blanking time further optimize stepping performance. A 3.3V/10mA LDO provides power for external logic circuits. Comprehensive protection includes VM undervoltage lockout, logic undervoltage, charge pump undervoltage, overcurrent protection (latched or retry modes), and thermal shutdown with nFAULT fault indication.

Working Principle: DRV8880PWPR Working Principle

The DRV8880 operates through five subsystems: (1) H-Bridge Power Stage: Two N-channel MOSFET H-bridges drive the two phases of a bipolar stepper motor. Each bridge can drive up to 2A full-scale current (1.4A RMS) with proper thermal design. An internal charge pump generates the gate drive voltage above VM to drive the high-side NMOS FETs. (2) Microstepping Indexer: The STEP/DIR interface increments the internal indexer on each STEP rising edge. The indexer generates sinusoidal current references for each phase at the selected step resolution (full, half, 1/4, 1/8, or 1/16 step). (3) Current Regulation: PWM chopping regulates the winding current to the target set by the indexer. The off-time can be configured to 10, 20, or 30us. The decay mode (slow, fast, mixed, or Smart Tune) determines how current decreases during each PWM cycle. (4) Smart Tune: Automatically selects the optimal decay profile on a step-by-step basis, monitoring the current waveform and adjusting the blanking time and decay ratio. This eliminates the need for manual decay mode tuning and compensates for motor parameter variations. (5) Protection: Multiple fault monitors (VM UVLO, logic UVLO, charge pump UV, OCP, TSD) can trigger the open-drain nFAULT output. OCP can be configured in latched mode (requires nSLEEP toggle) or auto-retry mode.

Pin Description: DRV8880PWPR Pin Definition and Functions
Pin Group Count Type Description
AOUT1/AOUT2 2 Output Phase A bridge outputs
BOUT1/BOUT2 2 Output Phase B bridge outputs
STEP/DIR 2 Input Step clock and direction control
ENABLE 1 Input Bridge enable (active low)
nSLEEP 1 Input Sleep mode control (active low)
DECAY 1 Input Decay mode select
TRQ0/TRQ1 2 Input Torque/current scaling
M0/M1 2 Input Microstep resolution select
TOFF 1 Input PWM off-time select
nFAULT 1 Output Fault indication (open-drain)
VREF 1 Input Current reference voltage
V3P3 1 Output 3.3V LDO output
VM/Power 4 Power Motor supply, ground, logic supply
Application Scenarios: In which products and applications is DRV8880PWPR used
  • 3D printer stepper driver with Smart Tune auto-tuning, 1/16 microstepping, and 24V supply
  • PTZ security camera with 12V motor supply, STEP/DIR control, and thermal shutdown protection
  • ATM bill handling mechanism with latched OCP mode and nFAULT fault reporting to host MCU
  • Industrial conveyor with 45V supply, 2A per phase, and configurable off-time PWM for smooth operation
Alternative Models: What chips are recommended as replacements for DRV8880PWPR
Model Manufacturer Voltage Current Notes
DRV8825 TI 45V 2.5A Older, no smart tune
DRV8886AT TI 45V 2A Newer with integrated current sense
TMC2209 Trinamic 29V 2A StealthChop, StallGuard
A4988 Allegro 35V 2A Popular, simpler interface

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1