Opens in a new tab

NUD3112DMT1G

12V relay/inductive load driver, 400mA, Zener clamp, SC-74

2572

Effective Inventory

Image for reference only

Manufacturer Part:

NUD3112DMT1G

Package:

SC-74 / SOT-457 (3.0 x 1.5 x 0.94 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NUD3112DMT1G from onsemi is an integrated relay and inductive load driver in a 6-pin SC-74 (SOT-457) package. It integrates an N-channel MOSFET switch with ESD protection and Zener clamp, eliminating the need for external freewheeling diodes when driving inductive loads such as 12V relay coils up to 6W.

Key Specifications

Function Inductive Load Driver / Relay Driver
Number of Drivers 2
Maximum VCC 14V
Output Current 300-400 mA per driver
RDS(ON) 0.9 Ohm max
Breakdown Voltage (VDSS) 14V
Gate-Source Breakdown 6V
Power Dissipation 380 mW
Relay Coil Rating Up to 6W at 12V
Input Type Logic level
Internal Protection Zener clamp (no freewheeling diode needed)
ESD Protection Integrated
Operating Temperature -40 to +85 C
Package SC-74 / SOT-457 (3.0 x 1.5 x 0.94 mm)
Status Last Shipments / Obsolete
RoHS Yes

Features

  • Integrated MOSFET switch + Zener clamp + ESD protection
  • No external freewheeling diode required
  • Optimized for 12V relay coil driving
  • Up to 6W relay coil at 12V
  • Logic level input compatible
  • Internal Zener routes induced current to ground for quiet operation
  • Low RDS(ON) reduces system current drain

Applications

  • Telecom line cards, modems
  • TV, VCR, stereo receivers
  • Small appliances, security systems
  • Photocopiers, printers
Product Introduction: NUD3112DMT1G Product Introduction

The NUD3112DMT1G from onsemi is an integrated relay and inductive load driver in a 6-pin SC-74 (SOT-457) package. The DMT suffix denotes the SC-74 package, 1G indicates lead-free. The device integrates all necessary components for driving inductive loads: an N-channel MOSFET switch for load control, an internal Zener clamp that eliminates the need for external freewheeling diodes, and ESD protection for robust operation. When the MOSFET turns off, the inductive kick from the relay coil is clamped by the internal Zener diode, routing the induced current to ground for quieter system operation. The device accepts logic level inputs, making it compatible with direct MCU drive. Optimized for 12V relay rails, it can drive relay coils rated up to 6W at 12V with 0.9 ohm maximum RDS(ON). Note: This device is in Last Shipments status; consider NUD3120DMT1G as a newer alternative.

Working Principle: NUD3112DMT1G Working Principle

The NUD3112DMT1G operates through three integrated subsystems: (1) MOSFET Switch: An N-channel power MOSFET with 0.9 ohm RDS(ON) connects the load to ground when the gate is driven high by the logic input. The MOSFET is rated for 14V drain-source breakdown and can sink 300-400mA continuously. (2) Zener Clamp: When the MOSFET turns off, the collapsing magnetic field in the inductive load generates a back-EMF voltage spike. The internal Zener diode clamps this voltage and provides a path for the inductive current, which flows through the Zener to ground. This eliminates the need for an external freewheeling diode across the relay coil and routes the induced energy to ground rather than back into the supply rail, resulting in quieter system operation. (3) ESD Protection: Internal ESD protection on the input pin protects the gate oxide from electrostatic discharge events during handling and operation.

Pin Description: NUD3112DMT1G Pin Definition and Functions
Pin Name Type Description
1 GND Power Ground (source of MOSFET)
2 IN Input Logic level gate drive input
3 VCC Power Supply voltage (12V typical)
4 DRAIN Output MOSFET drain (load connection)
5 GND Power Ground (source of MOSFET)
6 DRAIN Output MOSFET drain (second load)
Application Scenarios: In which products and applications is NUD3112DMT1G used
  • 12V relay driver with integrated Zener clamp eliminating external freewheeling diode in telecom line cards
  • Solenoid driver for security system door locks with logic-level MCU control
  • Small DC motor driver in office automation equipment with ESD-protected input
  • Multiple relay driver using dual outputs for printer paper feed and carriage control
Alternative Models: What chips are recommended as replacements for NUD3112DMT1G
Model Manufacturer Package Notes
NUD3120DMT1G onsemi SC-74 Newer replacement, same function
NUD3105DMT1G onsemi SC-74 Single driver version
TPL7407LA TI TSSOP-16 7-channel relay driver
ULN2003A TI/onsemi DIP-16 7-channel Darlington driver

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1