Opens in a new tab

Home » Integrated Circuits ICs » MT25QL128ABA8E12-1SIT

MT25QL128ABA8E12-1SIT

128Mb SPI NOR Flash, 3V, Quad I/O, 133MHz, SOIC-16

5582

Effective Inventory

Image for reference only

Manufacturer Part:

MT25QL128ABA8E12-1SIT

Package:

SOIC-16 (300mil)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MT25QL128ABA8E12-1SIT from Micron is a 128Mb serial NOR flash with Quad I/O SPI operating at 133MHz, providing fast read throughput for firmware storage and execute-in-place applications.

Key Specifications

Package SOIC-16 (300mil)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: MT25QL128ABA8E12-1SIT Product Introduction

The MT25QL128ABA8E12-1SIT from Micron is a 128Mb serial NOR flash with Quad I/O SPI operating at 133MHz, providing fast read throughput for firmware storage and execute-in-place applications.

Working Principle: MT25QL128ABA8E12-1SIT Working Principle

The MT25QL128ABA8E12-1SIT is a 128Mb (16MB) SPI NOR Flash from Micron in SOIC-16 (208mil width), supporting standard SPI, Dual I/O, and Quad I/O (QIO) modes. The 16-pin SOIC-16 package provides separate pins for WP (IO2) and HOLD (IO3), which can be repurposed as data lines in QIO mode, enabling 4-bit parallel data transfer. In QIO mode at 133MHz SDR clock, the bandwidth is 66MB/s (133MHz x 4 bits); in QIO DDR mode, 266MB/s. The Flash memory is organized as 256 sectors of 64KB each, with 4096 sub-sectors of 4KB for flexible erase granularity. The 4KB sub-sector erase takes 0.3s, while a 64KB sector erase takes 1.5s. Page programming writes 1-256 bytes in 0.5ms typical. The device supports XIP (eXecute In Place): the host MCU can directly execute code from the Flash without copying to RAM, using the QIO mode for sufficient bandwidth. The QE (Quad Enable) bit in the status register must be set before using IO2/IO3 as data lines. The device includes 3 x 256-byte security registers with 64-bit unique IDs for anti-counterfeiting. The 4KB parameter sectors at the top or bottom of the address space support boot code storage. The -1SIT suffix specifies: 133MHz, SOIC-16, industrial temperature (-40C to +85C). The device is used for: bootloader storage, firmware images, FPGA configuration, and XIP code storage in embedded Linux systems.

Pin Description: MT25QL128ABA8E12-1SIT Pin Definition and Functions
Pin Name Type Function
1 S# (CS) Input Chip select (active LOW, selects the device for SPI commands)
2 DQ1 (MISO/IO1) I/O Data input/output 1 (MISO in standard SPI, data line 1 in multi-I/O)
3 W#/VPP (IO2) I/O Write protect / VPP (dual-purpose: WP in standard, IO2 in QIO)
4 VSS Power Ground
5 DQ0 (MOSI/IO0) I/O Data input/output 0 (MOSI in standard SPI, data line 0 in multi-I/O)
6 SCK Input Serial clock (up to 133MHz for 266MB/s in DDR QIO)
7 H#/RST# (IO3) I/O Hold / Reset (dual-purpose: HOLD in standard, IO3 in QIO)
8 VCC Power Core supply (2.7-3.6V, 3V typical)
Application Scenarios: In which products and applications is MT25QL128ABA8E12-1SIT used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for MT25QL128ABA8E12-1SIT
    Manufacturer Part Number Package Notes
    Micron MT25QL128ABA8E12-1SIT SOIC-16 Same device, Micron brand
    Micron MT25QL256ABA8E12-1SIT SOIC-16 256Mb version, double density
    Winbond W25Q128JVSIM SOIC-8 128Mb QSPI Flash, Winbond brand, 8-pin
    Macronix MX25L12833FMI-10G SOIC-16 128Mb QSPI Flash, Macronix brand
    ISSI IS25LP128JBLE SOIC-16 128Mb QSPI Flash, ISSI brand

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1