Opens in a new tab

6N137SDM

High-speed optocoupler, 10Mbps, logic gate output, DIP-8

9359

Effective Inventory

Image for reference only

Manufacturer Part:

6N137SDM

Package:

DIP-8 (SMD)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 6N137SDM from Everlight is a high-speed 10Mbps optocoupler with logic gate output and 3750Vrms isolation in a DIP-8 SMD package for digital signal isolation.

Key Specifications

Package DIP-8 (SMD)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: 6N137SDM Product Introduction

The 6N137SDM from Everlight is a high-speed 10Mbps optocoupler with logic gate output and 3750Vrms isolation in a DIP-8 SMD package for digital signal isolation.

Working Principle: 6N137SDM Working Principle

The 6N137SDM is a high-speed optocoupler from Vishay in DIP-8 (SMD variant), providing 10Mbps data rate with 5000Vrms isolation. The device consists of an AlGaAs LED on the input side and an integrated photodetector + amplifier + output driver on the output side. When the LED is forward-biased (IF = 5-15mA), the photodiode receives the light and generates a small photocurrent (approximately 50uA). This photocurrent is amplified by the internal transimpedance amplifier and drives the open-collector output transistor LOW. When the LED is off, the output is HIGH (pulled up by an external resistor). The key to the 10Mbps speed is the photodiode detector (vs. phototransistor used in slow optocouplers): photodiodes have nanosecond response times because they generate current directly from photon absorption, while phototransistors require base charge accumulation and have microsecond response times. The internal amplifier compensates for the low photodiode current, driving the output with sufficient fanout. The propagation delay is 45ns typical (75ns maximum), and the pulse width distortion is 5ns. The open-collector output can sink 13mA. The CTR (Current Transfer Ratio) is not applicable in the traditional sense because the output is logic-level; instead, the device specifies IF(threshold) = 5mA maximum (the minimum LED current to guarantee output switching). The VE (output enable) pin allows tri-stating the output for bus applications. The 5000Vrms isolation provides safety isolation between the driving and receiving circuits. The -SDM suffix specifies DIP-8 SMD (gull-wing leads). Applications include: isolated UART/SPI communication, SMPS feedback loops, and industrial data links.

Pin Description: 6N137SDM Pin Definition and Functions
Pin Name Type Function
1 NC – No connect (not internally connected)
2 Anode Input LED anode (connects to current-limiting resistor, IF=5-15mA)
3 Cathode Input LED cathode (connects to signal ground of driving side)
4 NC – No connect
5 GND Power Output ground (connects to receiving side ground)
6 VOUT Output Logic output (open-collector, LOW when LED is on)
7 VE Input Output enable (connect to VCC or leave open for always-enable)
8 VCC Power Output supply (4.5-5.5V)
Application Scenarios: In which products and applications is 6N137SDM used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for 6N137SDM
    Manufacturer Part Number Package Notes
    Vishay 6N137SDM DIP-8 Same device, Vishay brand
    Broadcom HCPL-2531-000E DIP-8 Dual channel, 10Mbps, similar
    Toshiba TLP2745 SOP-6 10Mbps optocoupler, Toshiba brand
    Renesas PS9117-F4 SOP-8 10Mbps optocoupler, Renesas brand
    onsemi HCPL-0611-500E SOIC-8 Single 10Mbps, SMD version

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1