Opens in a new tab

MC34063ADR2G

DC-DC converter, step-up/down/inverting, 1.5A, SOIC-8

3584

Effective Inventory

Image for reference only

Manufacturer Part:

MC34063ADR2G

Package:

SOIC-8

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MC34063ADR2G from onsemi is a 1.5A DC-DC converter control circuit supporting step-up, step-down, and voltage-inverting topologies in SOIC-8 for versatile power conversion.

Key Specifications

Package SOIC-8

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: MC34063ADR2G Product Introduction

The MC34063ADR2G from onsemi is a 1.5A DC-DC converter control circuit supporting step-up, step-down, and voltage-inverting topologies in SOIC-8 for versatile power conversion.

Working Principle: MC34063ADR2G Working Principle

The MC34063ADR2G is a DC-DC converter control IC from onsemi in SOIC-8, capable of step-up (boost), step-down (buck), and voltage-inverting topologies with external components. It is one of the oldest and most widely used switching regulator ICs (introduced 1980s, still in production). The internal architecture: (1) A 1.25V bandgap reference; (2) A comparator that compares the scaled output voltage (via resistor divider on CII pin) with the reference; (3) An oscillator that generates the switching frequency from the external timing capacitor (CT pin); (4) A 1.5A Darlington NPN output switch (SWC/SWE pins); (5) A peak current sense comparator (Ipk pin, 330mV threshold). The control loop: the oscillator sets the switch ON time; during ON time, current ramps up in the external inductor; if the peak current exceeds the Ipk threshold, the switch turns off early; the OFF time is set by the oscillator; the comparator regulates the output by skipping cycles or adjusting the duty cycle. In buck mode: the switch connects the inductor to VIN during ON time; during OFF time, the inductor current flows through the external Schottky diode to the output. Typical external components: inductor (100-470uH), Schottky diode (1A), timing capacitor (470pF-1nF for 25-100kHz), current sense resistor (0.2-1 ohm), and input/output capacitors. Efficiency is typically 70-85%. The -ADR2G suffix specifies SOIC-8, lead-free. The MC34063 is used in automotive, industrial, and consumer electronics for simple, low-cost voltage conversion.

Pin Description: MC34063ADR2G Pin Definition and Functions
Pin Name Type Function
1 SWC Output Switch collector (internal Darlington NPN collector, up to 40V)
2 SWE Output Switch emitter (internal Darlington NPN emitter, connects to inductor/diode)
3 CT Analog Timing capacitor (sets switching frequency: f = 1/(0.000055 x CT), 24kHz at 1nF)
4 GND Power Ground
5 CII Input Comparator inverting input (1.25V reference, connect resistor divider from output)
6 VCC Power Supply (3.0-40V, connect with 470uF electrolytic and 0.1uF ceramic)
7 Ipk Input Peak current sense (connect sense resistor from VCC, Vpk=330mV threshold)
8 DRC Output Driver collector (internal PNP driver collector, boost current gain)
Application Scenarios: In which products and applications is MC34063ADR2G used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for MC34063ADR2G
    Manufacturer Part Number Package Notes
    onsemi MC34063ADR2G SOIC-8 Same device, onsemi brand
    Texas Instruments MC34063ADR SOIC-8 Same device, TI brand
    onsemi NCV33063ADR2G SOIC-8 Automotive version, AEC-Q100 qualified
    STMicroelectronics L4970A DIP-20 5A buck regulator, more integrated, ST brand
    Texas Instruments LM2596SX-5.0 TO-263 5V 3A SIMPLE SWITCHER, TI brand, easier to use

    Recommend Parts

    IRFS4310ZTRLPBF

    IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

    Brand: infineon

    Package: D2PAK (TO-263AB)

    IN STOCK: 11137pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MSASJ105BB5475MFNA01

    4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

    Brand: gigadevice

    Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

    IN STOCK: 9701pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRF3415PBF

    150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 2940pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    105017-1001

    USB Type-C receptacle connector, 24-pin, SMD

    Brand: Amphenol

    Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

    IN STOCK: 5335pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRLB3034PBF

    IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 9724pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    XC6SLX75-2FGG484I

    Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

    Brand: xilinx

    Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

    IN STOCK: 890pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1