Opens in a new tab

3362P-1-103LF

10kOhm 3/8in square trimmer potentiometer, through-hole

9527

Effective Inventory

Image for reference only

Manufacturer Part:

3362P-1-103LF

Package:

3/8in square (9.5×9.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 3362P-1-103LF from Bourns is a 10kOhm multiturn trimmer potentiometer in a 3/8-inch square through-hole package for calibration and adjustment in electronic circuits.

Key Specifications

Package 3/8in square (9.5×9.5mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: 3362P-1-103LF Product Introduction

The 3362P-1-103LF from Bourns is a 10kOhm multiturn trimmer potentiometer in a 3/8-inch square through-hole package for calibration and adjustment in electronic circuits.

Working Principle: 3362P-1-103LF Working Principle

The 3362P-1-103LF is a 10kOhm single-turn cermet trimmer potentiometer from Bourns in the industry-standard 3/8-inch square footprint (9.5 x 9.5mm). The P-series is a sealed top-adjustment design with a Philips screw adjustment slot. The cermet (ceramic-metal composite) resistive element provides: (1) Wide resistance range (10 ohm to 5M ohm); (2) Low temperature coefficient (+/-100ppm/C typical); (3) Good stability (2% CRV – Contact Resistance Variation); (4) Long adjustment life (200 cycles minimum). The single-turn design provides approximately 270 degrees of mechanical rotation from minimum to maximum resistance. The resolution is approximately 0.15% per degree of rotation, giving roughly 1800 discrete positions. The power rating is 0.5W at 70C, derating linearly to 0W at 125C. The 103 in the part number encodes the resistance: 10 x 10^3 = 10,000 ohms. The -LF suffix specifies lead-free. The 3362P is a board-level adjustment component, not intended for frequent user access: it is set during manufacturing calibration and then left in position. Common applications: (1) Voltage feedback adjustment in DC-DC converters (trimming output voltage); (2) Op-amp offset nulling; (3) Oscillator frequency adjustment; (4) Sensor calibration. The sealed construction prevents contamination from flux and cleaning solvents during PCB assembly. The adjustment tool is a 0.05mm flat-blade screwdriver.

Pin Description: 3362P-1-103LF Pin Definition and Functions
Pin Name Type Function
1 CW Passive Counter-clockwise terminal (wiper moves away from this terminal when turned CW)
2 Wiper Passive Adjustable wiper terminal (moves between CW and CCW terminals)
3 CCW Passive Clockwise terminal (wiper moves toward this terminal when turned CW)
Application Scenarios: In which products and applications is 3362P-1-103LF used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for 3362P-1-103LF
    Manufacturer Part Number Package Notes
    Bourns 3362P-1-103LF 3/8in Square Same device, Bourns brand
    Bourns 3362P-1-503LF 3/8in Square 50kOhm version, same family
    Bourns 3296W-1-103LF 3/8in Square Multi-turn (25-turn), Bourns brand
    Vishay T73YP504KT20 3/8in Square 500kOhm, Vishay brand trimmer
    TE Connectivity 5411010331A 3/8in Square 10kOhm trimmer, TE brand

    Recommend Parts

    TMP275AIDR

    0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

    Brand: TI

    Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

    IN STOCK: 3681pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IL485E

    NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

    Brand: nve

    Package: SOIC-16 WB

    IN STOCK: 5280pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRFS4227TRLPBF

    IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

    Brand: infineon

    Package: D2PAK (TO-263)

    IN STOCK: 4334pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    CD4070BM96

    Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

    Brand: TI

    Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

    IN STOCK: 4245pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AB1526

    Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

    Brand: airoha

    Package: BGA

    IN STOCK: 25000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    LP2980IM5-5.0

    50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

    IN STOCK: 2557pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1