Opens in a new tab

MBRM120LT1G

1A 20V Schottky rectifier, SOD-123

10824

Effective Inventory

Image for reference only

Manufacturer Part:

MBRM120LT1G

Package:

SOD-123

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MBRM120LT1G from onsemi is a 1A 20V Schottky rectifier with 0.34V forward voltage in SOD-123 package for low-voltage power supply rectification.

Key Specifications

Package SOD-123

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: MBRM120LT1G Product Introduction

The MBRM120LT1G from onsemi is a 1A 20V Schottky rectifier with 0.34V forward voltage in SOD-123 package for low-voltage power supply rectification.

Working Principle: MBRM120LT1G Working Principle

The MBRM120LT1G is a 1A 20V Schottky rectifier from onsemi in SOD-123 package. The MBR prefix stands for Motorla Bathtub Rectifier (legacy naming), and the M suffix indicates the SOD-123 mini-package. The Schottky diode uses a metal-semiconductor junction (typically chromium or platinum silicide on n-type silicon) rather than a PN junction. This gives it two key advantages: (1) Lower forward voltage drop (VF = 0.34V typical at 1A, vs 0.7V for a silicon PN diode), reducing power dissipation in rectification applications; (2) Zero reverse recovery time (no minority carrier storage), eliminating switching losses in high-frequency applications. The trade-off is higher reverse leakage current (0.5mA at 20V, 25C, increasing to 10mA at 75C) and lower breakdown voltage (limited to about 200V for Schottky devices). The SOD-123 package (2.7 x 1.6mm) is the smallest commonly available power diode package, with typical PCB footprint of 4mm x 2mm including solder pads. The 1A rating is at 25C case temperature, derating to approximately 0.5A at 75C. The junction-to-ambient thermal resistance is 140C/W on minimum PCB pad. Applications include: DC-DC converter free-wheeling diode, reverse polarity protection, OR-ing diode in redundant power supplies, and solar cell bypass diode. The -LT1G suffix specifies SOD-123, tape-and-reel, lead-free.

Pin Description: MBRM120LT1G Pin Definition and Functions
Pin Name Type Function
1 Cathode Power Cathode (connects to positive output, marked with band on package)
2 Anode Power Anode (connects to switching node or ground)
Application Scenarios: In which products and applications is MBRM120LT1G used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for MBRM120LT1G
    Manufacturer Part Number Package Notes
    onsemi MBRM120LT1G SOD-123 Same device, onsemi brand
    STMicroelectronics STPS1L20A SOD-123 1A 20V Schottky, ST brand
    Diodes Inc. B120-13-F SOD-123 1A 20V Schottky, Diodes brand
    Vishay SS12-E3/61T SMA 1A 20V Schottky, larger SMA package
    Texas Instruments MBR120VLSFT1G SOD-123FL 1A 20V Schottky, TI brand

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1