Opens in a new tab

Home » Integrated Circuits ICs, Sensors » MAX31865ATP+T

MAX31865ATP+T

RTD-to-digital converter, PT100/PT1000, SPI, TQFN-20

14915

Effective Inventory

Image for reference only

Manufacturer Part:

MAX31865ATP+T

Package:

TQFN-20 (5x5mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX31865ATP+T from Analog Devices is an RTD-to-digital converter supporting PT100-PT1000 sensors, 15-bit resolution, 2/3/4-wire configuration, and SPI interface in TQFN-20.

Key Specifications

Package TQFN-20 (5x5mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: MAX31865ATP+T Product Introduction

The MAX31865ATP+T from Analog Devices is an RTD-to-digital converter supporting PT100-PT1000 sensors, 15-bit resolution, 2/3/4-wire configuration, and SPI interface in TQFN-20.

Working Principle: MAX31865ATP+T Working Principle

The MAX31865ATP+T is an RTD-to-digital converter from Maxim Integrated (now Analog Devices) in TQFN-20, designed to measure PT100 and PT1000 resistance temperature detectors (RTDs) with 15-bit resolution. The device uses a ratiometric measurement technique: a precision current (400uA for PT100, 400uA/10 for PT1000) flows through the RTD, and the voltage across the RTD is measured relative to a reference resistor (RREF) connected across REFIN+ and REFIN-. The ADC output code = (RTD / RREF) x 2^15, so the measurement is ratiometric and independent of the current source accuracy. For a PT100 sensor at 0C (100 ohms) with RREF = 430 ohms: code = (100/430) x 32768 = 7620. The fault detection circuitry monitors for: RTD open (infinite resistance), RTD short (near-zero resistance), reference resistor out of range, and overvoltage/undervoltage on the RTD inputs. The FAULT pin goes LOW when any fault is detected, and the fault type is readable via SPI. The DRDY pin goes LOW when a new conversion is complete, enabling interrupt-driven reads. The device supports 1-shot and continuous conversion modes. The conversion time is 21ms at 60Hz filter (50/60Hz rejection) or 10.5ms at 50Hz filter. The SPI interface operates at up to 5MHz. The internal oscillator eliminates external timing components. The ATP+T suffix specifies TQFN-20, tape-and-reel. Applications include industrial temperature measurement, medical thermometry, and HVAC control.

Pin Description: MAX31865ATP+T Pin Definition and Functions
Pin Name Type Function
1 SCK Input SPI clock input (from MCU)
2 SDO Output SPI data output (to MCU MISO)
3 SDI Input SPI data input (from MCU MOSI)
4 CS Input Chip select (active LOW)
5 RTDIN+ Input RTD positive input (connects to RTD sensor terminal)
6 RTDIN- Input RTD negative input (connects to RTD sensor terminal)
7 RTDIOUT Output Reference current output (drives RTD, typically 400uA)
8-10 BIAS/REFIN-/REFIN+ Input Bias voltage, reference inputs for ratiometric measurement
11-14 FORCE-/FORCE+/RTDIN+/AGND Power/Analog Force lines, RTD, analog ground
15-20 VDV/DD/DGND/FAULT/DRDY Power/Status Digital supply, ground, fault output, data ready
Application Scenarios: In which products and applications is MAX31865ATP+T used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for MAX31865ATP+T
    Manufacturer Part Number Package Notes
    Maxim MAX31865ATP+T TQFN-20 Same device, Maxim brand
    Analog Devices AD7124-4BCPZ LFCSP-24 24-bit ADC, RTD/TC input, higher resolution
    Texas Instruments ADS1220IPWR TSSOP-16 24-bit 2kSPS ADC, RTD/TC, lower cost
    Maxim MAX31855KASA+T SOIC-8 Thermocouple-to-digital, K-type only
    Analog Devices AD7793BRUZ TSSOP-16 24-bit sigma-delta, RTD input, low noise

    Recommend Parts

    TMP275AIDR

    0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

    Brand: TI

    Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

    IN STOCK: 3681pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IL485E

    NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

    Brand: nve

    Package: SOIC-16 WB

    IN STOCK: 5280pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRFS4227TRLPBF

    IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

    Brand: infineon

    Package: D2PAK (TO-263)

    IN STOCK: 4334pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    CD4070BM96

    Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

    Brand: TI

    Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

    IN STOCK: 4245pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AB1526

    Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

    Brand: airoha

    Package: BGA

    IN STOCK: 25000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    LP2980IM5-5.0

    50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

    IN STOCK: 2557pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1