Opens in a new tab

Home » Integrated Circuits ICs » MTFC8GAKAJCN-1M-WT

MTFC8GAKAJCN-1M-WT

8GB eMMC 5.1, 153-ball BGA

3359

Effective Inventory

Image for reference only

Manufacturer Part:

MTFC8GAKAJCN-1M-WT

Package:

BGA-153 (11.5x13mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MTFC8GAKAJCN-1M-WT from Micron is an 8GB eMMC 5.1 embedded storage device in 153-ball BGA for mobile and IoT applications requiring high-density flash storage.

Key Specifications

Package BGA-153 (11.5x13mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: MTFC8GAKAJCN-1M-WT Product Introduction

The MTFC8GAKAJCN-1M-WT from Micron is an 8GB eMMC 5.1 embedded storage device in 153-ball BGA for mobile and IoT applications requiring high-density flash storage.

Working Principle: MTFC8GAKAJCN-1M-WT Working Principle

The MTFC8GAKAJCN-1M-WT is an 8GB eMMC 5.1 embedded flash storage device from Micron in a 153-ball BGA package (11.5x13mm). eMMC integrates a NAND Flash memory array (MLC or TLC) with a Flash controller in a single package, presenting a simple eMMC interface to the host. The controller handles all NAND management: wear leveling (distributing writes across all blocks), bad block management (remapping failed blocks), error correction (BCH or LDPC ECC with up to 40-bit correction per 1KB), and garbage collection (reclaiming space from invalidated pages). The eMMC 5.1 specification supports HS400 mode: 200MHz DDR clock on the CMD and DAT buses, achieving 400MB/s theoretical bandwidth (320MB/s typical). The 1.2V VDD2 supply powers the NAND core, while 1.8V VDDQ powers the I/O. The HS400 mode uses the DS (Data Strobe) signal from the eMMC to the host for read data timing, eliminating setup/hold timing margin issues. The device supports: (1) Command queuing (CQ) for improved random read/write performance by reordering commands; (2) Background operation (BKOPS) for automatic garbage collection during idle; (3) Secure erase and trim for efficient space management; (4) Write reliability features including power-fail protection and refresh of critical data. The -1M suffix specifies industrial temperature (-40C to +85C). The -WT suffix specifies tape-and-reel packaging. eMMC is the dominant non-removable storage solution for IoT, automotive infotainment, and embedded Linux systems.

Pin Description: MTFC8GAKAJCN-1M-WT Pin Definition and Functions
Pin Name Type Function
1-4 DAT0-DAT3 I/O Data bus (8-bit wide in DDR mode, 4-bit default)
5-6 CMD/CLK I/O Command/response bus / Clock from host (up to 200MHz DDR)
7 DS Output Data strobe (used in HS400 mode for read data timing)
8-10 VDD/VDDQ/VSS Power Core supply (2.7-3.6V) / I/O supply (1.7-1.95V) / Ground
11 RST_n Input Hardware reset (active LOW, resets controller and NAND)
12-14 VDD2/VSS2/RFU Power 1.2V core supply / ground / reserved
15-153 DATA4-7/RFU I/O Extended data bus for 8-bit mode / reserved for future
Application Scenarios: In which products and applications is MTFC8GAKAJCN-1M-WT used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for MTFC8GAKAJCN-1M-WT
    Manufacturer Part Number Package Notes
    Micron MTFC16GAKAJCN-1M-WT BGA-153 16GB version, double density
    Micron MTFC4GAKAJCN-1M-WT BGA-153 4GB version, half density
    Samsung KLMBG2JETD-B041 BGA-153 8GB eMMC 5.1, Samsung brand
    SK Hynix H26M41404HPR BGA-153 8GB eMMC 5.1, Hynix brand
    Kioxia THGBMJG6C1LBAIL BGA-153 8GB eMMC 5.1, Kioxia brand

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1