Opens in a new tab

VNI4140KTR

Quad high-side driver, 40V 0.7A, PowerSSO-24

2718

Effective Inventory

Image for reference only

Manufacturer Part:

VNI4140KTR

Package:

PowerSSO-24 (7.5×10.3mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The VNI4140KTR from ST is a quad high-side driver with 40V rating, 0.7A per channel, current limitation, and SPI diagnosis in PowerSSO-24 for automotive loads.

Key Specifications

Package PowerSSO-24 (7.5×10.3mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: VNI4140KTR Product Introduction

The VNI4140KTR from ST is a quad high-side driver with 40V rating, 0.7A per channel, current limitation, and SPI diagnosis in PowerSSO-24 for automotive loads.

Working Principle: VNI4140KTR Working Principle

The VNI4140KTR is a quad-channel OmniPROM high-side driver from ST in PowerSSO-24. Each channel integrates an N-channel vertical power MOSFET with 700mOhm RDS(on) and 0.7A current capability, controlled through a charge-pump gate driver. The charge pump generates the gate voltage above the VS supply to fully enhance the MOSFET. Each channel provides over-temperature protection (150C junction) with auto-restart and current limitation. The DIAG pins report open-load and over-temperature faults for paired channels. The CS (Current Sense) pin provides an analog voltage proportional to the load current for MCU monitoring. The ST (Standby) pin reduces total supply current to 10uA when all channels are off, critical for automotive battery management. The device supports PWM operation up to 1kHz for lamp dimming and heater control.

Pin Description: VNI4140KTR Pin Definition and Functions
Pin Name Type Function
1-4 OUT1-OUT4 Output Power outputs (high-side MOSFET drains)
5-8 VS1-VS4 Power Load supply inputs (5.5-36V)
9 GND Power Ground
10 VCC Power Logic supply (3.0-5.5V)
11-14 IN1-IN4 Input Logic inputs for channels 1-4
15-18 DIAG1-DIAG2/CS Output Fault diagnosis / current sense
19-20 EN/ST Input Global enable / standby control
Application Scenarios: In which products and applications is VNI4140KTR used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for VNI4140KTR
    Manufacturer Part Number Package Notes
    STMicroelectronics ITS716GFUMA1 TSSOP-24 Quad 4A high-side switch
    Infineon TLE8110EE SSO-20 Quad high-side, automotive
    Infineon BTS443P TO-252-5 Single 4.5A high-side
    onsemi NVT4904NT4G TDFN-8 Dual high-side MOSFET

    Recommend Parts

    TMP275AIDR

    0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

    Brand: TI

    Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

    IN STOCK: 3681pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IL485E

    NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

    Brand: nve

    Package: SOIC-16 WB

    IN STOCK: 5280pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRFS4227TRLPBF

    IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

    Brand: infineon

    Package: D2PAK (TO-263)

    IN STOCK: 4334pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    CD4070BM96

    Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

    Brand: TI

    Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

    IN STOCK: 4245pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AB1526

    Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

    Brand: airoha

    Package: BGA

    IN STOCK: 25000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    LP2980IM5-5.0

    50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

    IN STOCK: 2557pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1