Opens in a new tab

BAT54S

Schottky diode array, 30V 200mA, common cathode, SOT-23

5003

Effective Inventory

Image for reference only

Manufacturer Part:

BAT54S

Package:

SOT-23 (2.9×1.3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BAT54S from NXP is a dual series Schottky diode array with 30V 200mA rating and common cathode in SOT-23 for OR-ing and steering applications.

Key Specifications

Package SOT-23 (2.9×1.3mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: BAT54S Product Introduction

The BAT54S from NXP is a dual series Schottky diode array with 30V 200mA rating and common cathode in SOT-23 for OR-ing and steering applications.

Working Principle: BAT54S Working Principle

The BAT54S is a dual Schottky diode array in SOT-23-3 configured as common cathode from NXP. Each diode has a 30V reverse voltage rating, 200mA forward current, and 0.32V typical forward voltage at 1mA (compared to 0.7V for silicon PN junction diodes). The Schottky junction is formed by a metal-semiconductor (barrier) contact rather than a PN junction: majority carriers conduct immediately without the minority carrier storage that causes reverse recovery in PN diodes. This makes BAT54S essentially free of reverse recovery charge (approximately 5nC), ideal for high-speed switching and RF applications. The common-cathode configuration is commonly used for logic OR-ing (two supplies feeding one rail), signal clamping (both anodes connected to a signal line, cathode to VCC and GND for ESD protection), or as a full-wave rectifier pair. The low forward voltage minimizes power dissipation in OR-ing and rectification applications.

Pin Description: BAT54S Pin Definition and Functions
Pin Name Type Function
1 A1 Anode Diode 1 anode
2 A2 Anode Diode 2 anode
3 K1/K2 Cathode Common cathode (diodes 1 and 2)
Application Scenarios: In which products and applications is BAT54S used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for BAT54S
    Manufacturer Part Number Package Notes
    Nexperia BAT54S SOT-23 Direct equivalent
    onsemi BAT54S SOT-23 Pin-compatible equivalent
    Infineon BAT54S E6327 SOT-23 Direct equivalent, Infineon label
    Nexperia BAT54C SOT-23 Common cathode variant (different pinout)
    Nexperia BAT54A SOT-23 Common anode variant

    Recommend Parts

    TMP275AIDR

    0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

    Brand: TI

    Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

    IN STOCK: 3681pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IL485E

    NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

    Brand: nve

    Package: SOIC-16 WB

    IN STOCK: 5280pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRFS4227TRLPBF

    IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

    Brand: infineon

    Package: D2PAK (TO-263)

    IN STOCK: 4334pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    CD4070BM96

    Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

    Brand: TI

    Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

    IN STOCK: 4245pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AB1526

    Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

    Brand: airoha

    Package: BGA

    IN STOCK: 25000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    LP2980IM5-5.0

    50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

    IN STOCK: 2557pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1