Opens in a new tab

TJA1048T

3.3V/5V CAN FD transceiver, 5Mbps, SOIC-8

12718

Effective Inventory

Image for reference only

Manufacturer Part:

TJA1048T

Package:

SOIC-8 (4.9×3.9mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TJA1048T from NXP is a high-speed CAN FD transceiver supporting up to 5Mbps, with 3.3V/5V I/O, bus wake-up, and +/-8kV ESD in SOIC-8.

Key Specifications

Package SOIC-8 (4.9×3.9mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: TJA1048T Product Introduction

The TJA1048T from NXP is a high-speed CAN FD transceiver supporting up to 5Mbps, with 3.3V/5V I/O, bus wake-up, and +/-8kV ESD in SOIC-8.

Working Principle: TJA1048T Working Principle

The TJA1048T is a high-speed CAN FD (Flexible Data Rate) transceiver from NXP in SOIC-8, supporting data rates up to 5Mbps (CAN FD) and 1Mbps (classical CAN). The transmitter converts the single-ended TXD logic signal to differential bus signals on CANH/CANL. A dominant bit (TXD=LOW) drives CANH to 3.5V and CANL to 1.5V (2V differential). A recessive bit (TXD=HIGH) releases both lines to 2.5V (0V differential). The receiver performs the inverse: a differential voltage above 0.9V (dominant threshold) drives RXD LOW; below 0.5V (recessive threshold) drives RXD HIGH. The SPLIT pin provides a 0.5xVCC bias voltage for split termination networks, stabilizing the bus common-mode voltage and improving EMC performance. The STB (standby) pin reduces current to 10uA while allowing remote wake-up via bus activity. The device supports up to 110 nodes on the bus and provides +/-8kV IEC ESD protection on bus pins.

Pin Description: TJA1048T Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data input (from MCU CAN controller)
2 GND Power Ground
3 VCC Power Supply (4.75-5.25V)
4 RXD Output Receive data output (to MCU CAN controller)
5 SPLIT Output Common-mode stabilization output
6 CANL I/O CAN bus low line
7 CANH I/O CAN bus high line
8 STB Input Standby mode control (LOW=standby)
Application Scenarios: In which products and applications is TJA1048T used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for TJA1048T
    Manufacturer Part Number Package Notes
    NXP TJA1043T SOIC-8 CAN FD with wake-up and diagnosis
    Texas Instruments SN65HVD230DR SOIC-8 3.3V CAN transceiver, 1Mbps
    Microchip MCP2551-I/SN SOIC-8 5V CAN transceiver, 1Mbps
    NXP TJA1050T SOIC-8 5V CAN, high-speed, no standby
    onsemi NCV7342MW0R2G DFN-8 CAN FD, 5Mbps, AEC-Q100

    Recommend Parts

    IRFS4310ZTRLPBF

    IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

    Brand: infineon

    Package: D2PAK (TO-263AB)

    IN STOCK: 11137pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MSASJ105BB5475MFNA01

    4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

    Brand: gigadevice

    Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

    IN STOCK: 9701pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRF3415PBF

    150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 2940pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    105017-1001

    USB Type-C receptacle connector, 24-pin, SMD

    Brand: Amphenol

    Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

    IN STOCK: 5335pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRLB3034PBF

    IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 9724pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    XC6SLX75-2FGG484I

    Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

    Brand: xilinx

    Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

    IN STOCK: 890pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1