Opens in a new tab

BMI270

6-axis IMU, accelerometer+gyroscope, I2C/SPI, LGA-16

12849

Effective Inventory

Image for reference only

Manufacturer Part:

BMI270

Package:

LGA-16 (2.5×3.0mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BMI270 from Bosch Sensortec is a 6-axis inertial measurement unit combining a 16-bit accelerometer and gyroscope with built-in feature recognition and I2C/SPI interface in LGA-16.

Key Specifications

Package LGA-16 (2.5×3.0mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: BMI270 Product Introduction

The BMI270 from Bosch Sensortec is a 6-axis inertial measurement unit combining a 16-bit accelerometer and gyroscope with built-in feature recognition and I2C/SPI interface in LGA-16.

Working Principle: BMI270 Working Principle

The BMI270 is a 6-axis inertial measurement unit (IMU) from Bosch in LGA-16 (2.5×3.0×0.83mm), combining a 3-axis accelerometer and a 3-axis gyroscope. The accelerometer uses a capacitive MEMS sensing element: a proof mass suspended by silicon springs moves relative to fixed electrodes under acceleration, changing the capacitance. A sigma-delta C-to-V converter digitizes this capacitance change at 1.6kHz ODR. Full-scale ranges: +/-2g, +/-4g, +/-8g, +/-16g with 16-bit resolution (0.06mg/LSB at +/-2g). The gyroscope uses a vibrating MEMS structure (tuning fork): the Coriolis effect causes a secondary vibration perpendicular to the drive vibration when rotated. The amplitude of this secondary vibration is proportional to angular rate. Full-scale ranges: +/-125, +/-250, +/-500, +/-1000, +/-2000 dps with 16-bit resolution. The built-in feature engine provides hardware-accelerated algorithms: step counter (pedometer), step detector, any-motion detection, significant motion detection (for Google Activity Recognition), wrist-wear wake-up, and tilt detection. These run autonomously at 0.5mA without MCU intervention. The programmable interrupt engine routes events to INT1/INT2. FIFO stores up to 2048 bytes of sensor data, reducing MCU read frequency and bus traffic. Power consumption is 0.65mA in full 6-axis mode.

Pin Description: BMI270 Pin Definition and Functions
Pin Name Type Function
1 VDDIO Power I/O supply (1.2-3.6V)
2 VDD Power Core supply (1.71-3.6V)
3 GND Power Ground
4 CSB Input SPI chip select (active low, also selects SPI vs I2C)
5 SCL/SCLK Input I2C clock / SPI clock
6 SDI/SDA I/O SPI data in / I2C data
7 SDO Output SPI data out (I2C address select when low)
8 INT1 Output Interrupt 1 output (programmable)
9-10 INT2/GND Output/Power Interrupt 2 output / Ground
11-16 NC/EPAD – No connect / Exposed thermal pad
Application Scenarios: In which products and applications is BMI270 used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for BMI270
    Manufacturer Part Number Package Notes
    Bosch BMI260 LGA-16 Successor, lower power, same footprint
    TDK/InvenSense ICM-42688-P LGA-14 6-axis IMU, SPI up to 24MHz
    STMicroelectronics LSM6DSOXTR LGA-14 6-axis IMU with machine learning core
    TDK/InvenSense ICM-20689 QFN-16 6-axis IMU, 425Hz ODR
    Analog Devices ADIS16475-2BMLZ Module 6-axis MEMS IMU, industrial grade

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1