Opens in a new tab

LPC1768FET100

100MHz ARM Cortex-M3 MCU with 512KB Flash, 64KB SRAM, Ethernet, USB, 2x CAN in TFBGA-100

7821

Effective Inventory

Image for reference only

Manufacturer Part:

LPC1768FET100

Package:

TFBGA-100 (9x9x0.7mm, SOT926-1)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LPC1768FET100 from NXP Semiconductors is a high-performance 32-bit ARM Cortex-M3 microcontroller operating at up to 100 MHz. It features 512 KB of Flash memory and 64 KB of SRAM in a TFBGA-100 package, making it suitable for a wide range of embedded applications requiring Ethernet, USB, and CAN connectivity.

Key Specifications

Core ARM Cortex-M3 @ 100 MHz
Flash Memory 512 KB
SRAM 64 KB
Ethernet MAC Yes
USB Device/Host/OTG
CAN 2 channels
UART 4 channels
ADC 12-bit, 8 channels
DAC 10-bit
Supply Voltage 2.4V to 3.6V
Operating Temperature -40 to 85 C
Package TFBGA-100 (9x9x0.7mm)

Features

  • 100 MHz ARM Cortex-M3 core with 3-stage pipeline
  • 8-channel DMA controller for autonomous data transfers
  • Motor control PWM with quadrature encoder interface
  • 3 SPI/SSP, 3 I2C, and I2S interfaces
  • 70 GPIO pins with configurable interrupt capability

Applications

  • Industrial networking and communication gateways
  • Motor control and power management systems
  • Medical devices and diagnostic equipment
  • Consumer electronics with USB connectivity
  • Embedded Ethernet applications
Product Introduction: LPC1768FET100 Product Introduction

The LPC1768FET100 is a member of NXP’s LPC17xx family of ARM Cortex-M3 based microcontrollers. Operating at frequencies up to 100 MHz, it delivers high performance with low power consumption. The device integrates 512 KB of Flash program memory and 64 KB of SRAM, along with a rich set of peripherals including Ethernet MAC, USB Device/Host/OTG controller, two CAN bus controllers, four UARTs, three SSP/SPI interfaces, three I2C interfaces, I2S, and a 12-bit ADC with 8 input channels. The TFBGA-100 package provides a compact footprint for space-constrained designs.

Working Principle: LPC1768FET100 Working Principle

The LPC1768FET100 operates around the ARM Cortex-M3 CPU core with a 3-stage pipeline achieving 1.25 DMIPS/MHz. **Memory Subsystem**: The 512KB Flash stores program code with accelerators for zero-wait-state access at 100 MHz. 64KB SRAM supports high-speed data operations. **Peripheral Subsystem**: An 8-channel DMA controller enables autonomous data transfers between peripherals and memory without CPU intervention. The Ethernet MAC interfaces directly with an external PHY via MII/RMII. **Power Subsystem**: Multiple power domains allow selective power-down of unused peripherals. An integrated voltage regulator allows single 3.3V supply operation. **Communication Subsystem**: Dual CAN controllers support CAN 2.0B with full bus arbitration, while USB OTG provides flexible host/device operation.

Pin Description: LPC1768FET100 Pin Definition and Functions
Pin Name Description
A1 P0.0/SDA1 GPIO/ I2C1 Data
A2 P0.1/SCL1 GPIO/ I2C1 Clock
A3 P0.2/TXD0 GPIO/ UART0 Transmit
A4 P0.3/RXD0 GPIO/ UART0 Receive
B1 VDD 3.3V Power Supply
B2 VSS Ground
C1 P0.4/CANRD2 GPIO/ CAN2 Read
C2 P0.5/CANTD2 GPIO/ CAN2 Transmit
D1 P0.6/ISP GPIO/ In-System Programming
D2 P0.7/SCK0 GPIO/ SSP0 Clock
Application Scenarios: In which products and applications is LPC1768FET100 used
  • Industrial Networking: Ethernet-enabled gateway controllers for factory automation protocols
  • Motor Control: PWM-based motor drive systems with quadrature encoder feedback
  • Medical Devices: Patient monitoring systems with USB data logging and CAN communication
  • Consumer Electronics: Audio streaming devices leveraging I2S and USB OTG interfaces
  • Smart Energy: Smart meter applications utilizing Ethernet and low-power modes
Alternative Models: What chips are recommended as replacements for LPC1768FET100
Model Manufacturer Key Difference
LPC1769FET100 NXP 120 MHz version, pin-compatible
LPC1788FET100 NXP With LCD controller, 96KB RAM
STM32F107VCT6 STMicroelectronics Cortex-M3, 72MHz, Ethernet
SAM3X8E Microchip Cortex-M3, 84MHz, Ethernet
K60FN1M0VLQ12 NXP Cortex-M4, 120MHz, Ethernet

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1