Opens in a new tab

RT8279GSP

5A 36V 500kHz step-down DC-DC converter with integrated 110mOhm MOSFET in SOP-8 EP

13013

Effective Inventory

Image for reference only

Manufacturer Part:

RT8279GSP

Package:

SOP-8 Exposed Pad (4.9 x 3.9 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The RT8279GSP from Richtek is a 5A, 36V, 500kHz step-down (buck) DC-DC converter with an integrated 110mOhm N-channel MOSFET. It features current-mode control with internal compensation, providing a compact and efficient power conversion solution in an SOP-8 (Exposed Pad) package.

Key Specifications

Input Voltage Range 5.5V to 36V
Output Voltage Range 1.222V to 26V (adjustable)
Output Current 5A (continuous)
Switching Frequency 500 kHz (fixed)
Internal MOSFET RDS(ON) 110 mOhm
Reference Voltage 1.222V
Shutdown Current 25 uA (typ)
Efficiency Up to 90%
Operating Temperature -40 to 85 C
Package SOP-8 (Exposed Pad)

Features

  • Integrated 110mOhm N-channel MOSFET for 5A output
  • Internal soft-start and compensation
  • Cycle-by-cycle over-current protection
  • Thermal shutdown protection
  • 25uA low shutdown quiescent current

Applications

  • Distributed power systems
  • Battery chargers and power banks
  • DSL modems and networking equipment
  • Linear regulator pre-regulation
  • Automotive and industrial power supplies
Product Introduction: RT8279GSP Product Introduction

The RT8279GSP is a high-efficiency step-down DC-DC converter from Richtek Technology featuring an integrated 110mOhm N-channel MOSFET capable of delivering up to 5A of continuous output current. The device operates from a 5.5V to 36V input range and produces an adjustable output voltage from 1.222V to 26V. Using fixed 500kHz switching frequency with current-mode control and internal compensation, it simplifies design by minimizing external component count while maintaining excellent transient response and stability.

Working Principle: RT8279GSP Working Principle

The RT8279GSP employs a current-mode control architecture for its buck converter operation. **Power Stage**: The integrated 110mOhm N-channel MOSFET switches at 500kHz, charging and discharging the external inductor to transfer energy from input to output. An external bootstrap diode and capacitor drive the high-side switch. **Control Loop**: Current-mode control compares the inductor current ramp against the error amplifier output voltage. Internal Type-II compensation eliminates the need for external compensation components while ensuring stability across operating conditions. **Protection Subsystem**: Cycle-by-cycle current limiting protects against overloads. Thermal shutdown disables switching when junction temperature exceeds approximately 160C. **Soft-Start**: An internal soft-start circuit gradually ramps the reference voltage, limiting inrush current during startup.

Pin Description: RT8279GSP Pin Definition and Functions
Pin Name Description
1 BOOT Bootstrap capacitor connection for high-side gate driver
2 VIN Input supply voltage (5.5V to 36V)
3 LX Switching node (inductor connection)
4 GND Power ground
5 FB Feedback voltage input (reference 1.222V)
6 EN Enable input (active high, pull low to shutdown)
7 COMP Internal compensation node
8 VCC Internal 5V LDO output (decouple with 1uF cap)
EP Exposed Pad Thermal pad, connect to GND plane
Application Scenarios: In which products and applications is RT8279GSP used
  • Industrial Power: 24V bus to 5V/3.3V POL conversion for PLCs and motor controllers
  • Automotive: 12V battery to 5V or 3.3V supply for infotainment and ADAS systems
  • Battery Charging: CC-CV charging profiles for Li-ion packs from 12V-24V sources
  • Networking: DSL modem and router power supplies from 12V wall adapters
  • Pre-Regulation: Efficient front-end for downstream LDO regulators
Alternative Models: What chips are recommended as replacements for RT8279GSP
Model Manufacturer Key Difference
LMR16030PDDAR TI 3A, 40V, 2.1MHz, smaller inductor
MP8759GD-Z MPS 4A, 36V, 500kHz, QFN package
TPS54560DDAR TI 5A, 60V, 500kHz, wider input
AP65509SP-13 Diodes Inc 5A, 36V, 500kHz, SOP-8
XL4015E1 XLSEMI 5A, 36V, 180kHz, TO-263

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1