Opens in a new tab

MPU-9250

9-axis IMU (3-axis gyro+accel+mag) with DMP, 16-bit ADCs, 3x3x1mm QFN-24

14303

Effective Inventory

Image for reference only

Manufacturer Part:

MPU-9250

Package:

QFN-24 (3 x 3 x 1mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MPU-9250 from InvenSense (TDK) is a 9-axis MotionTracking device combining a 3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer (AK8963) in a single 3x3x1mm QFN package. It features 16-bit ADCs for each channel and includes an onboard Digital Motion Processor (DMP).

Key Specifications

Gyroscope Range +/-250/500/1000/2000 dps
Accelerometer Range +/-2/4/8/16 g
Magnetometer Range +/-4800 uT
Gyro Noise Density 0.01 dps/sqrt(Hz)
Accel Noise Density 80 ug/sqrt(Hz)
Magnetometer Resolution 0.15 uT
Interface I2C (400kHz) / SPI (1MHz)
Supply Voltage VDD 2.4-3.6V, VDDIO 1.71V-VDD
Shock Tolerance 10,000 g
Package QFN-24 (3x3x1mm)

Features

  • Single-chip 9-axis MotionTracking with integrated DMP
  • 16-bit ADC resolution for all 9 axes
  • Programmable full-scale ranges for gyro and accel
  • On-chip 16-bit ADC for magnetometer

Applications

  • Wearable fitness trackers and smartwatches
  • Smartphone and tablet motion sensing
  • Drone flight stabilization and navigation
  • Robotics and gaming controllers
  • Indoor navigation and position tracking
Product Introduction: MPU-9250 Product Introduction

The MPU-9250 is a multi-chip module (MCM) from InvenSense that integrates a 3-axis gyroscope, 3-axis accelerometer, and an AK8963 3-axis magnetometer in a single 3x3x1mm QFN package. This 9-axis MotionTracking device features 16-bit ADCs for each sensor axis and includes an onboard Digital Motion Processor (DMP) that offloads complex sensor fusion computations from the host processor. The device supports both I2C and SPI serial interfaces and operates from a 2.4-3.6V supply with 1.71V-compatible I/O.

Working Principle: MPU-9250 Working Principle

The MPU-9250 integrates three MEMS sensor subsystems into a single package. **Gyroscope Subsystem**: Three independent vibratory MEMS rate gyroscopes measure angular velocity using the Coriolis effect. Each axis features a 16-bit ADC with programmable full-scale ranges from +/-250 to +/-2000 dps, with noise density of 0.01 dps/sqrt(Hz). **Accelerometer Subsystem**: A 3-axis capacitive MEMS accelerometer measures linear acceleration including gravity. 16-bit digitization with ranges from +/-2g to +/-16g and noise density of 80 ug/sqrt(Hz). **Magnetometer Subsystem**: The integrated AK8963 Hall-effect magnetometer measures the geomagnetic field for heading determination, with +/-4800 uT range and 0.15 uT resolution. **DMP**: The Digital Motion Processor executes sensor fusion algorithms (6-axis and 9-axis) in hardware, reducing host CPU load and providing quaternion output for orientation tracking.

Pin Description: MPU-9250 Pin Definition and Functions
Pin Name Description
1 VDDIO I/O supply voltage (1.71V to VDD)
2 SDA/SIMO I2C Data / SPI Data In
3 SCL/SCLK I2C Clock / SPI Clock
4 AD0/SDO I2C Address Select / SPI Data Out
5 nCS SPI Chip Select (active low)
6 INT Interrupt output to host
7 FSYNC Frame sync digital input
8 REGOUT Internal regulator bypass capacitor
9 GND Ground
10 VDD Power supply (2.4V to 3.6V)
Application Scenarios: In which products and applications is MPU-9250 used
  • Wearable Devices: Step counting, activity recognition, and gesture detection in smartwatches and fitness bands
  • Drone Stabilization: 9-axis sensor fusion for flight attitude estimation and heading hold
  • Indoor Navigation: Pedestrian dead reckoning using accelerometer, gyro, and magnetometer data fusion
  • Gaming Controllers: Motion-sensing and gesture recognition for VR/AR controllers
  • Robotics: IMU-based orientation and motion tracking for mobile robots and manipulators
Alternative Models: What chips are recommended as replacements for MPU-9250
Model Manufacturer Key Difference
MPU-6050 InvenSense 6-axis only (no magnetometer)
ICM-20948 InvenSense Successor, lower noise, DMP3
LSM9DS1 STMicroelectronics 9-axis, +/-16g, +/-2000dps, LGA-24
BNO055 Bosch 9-axis with integrated Cortex-M0 fusion
BMI160+BMX160 Bosch 6+9 axis combo, ultra-low power

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1