Opens in a new tab

TPS562201SDDCR

2A 17V 600kHz synchronous buck converter with D-CAP2 control in SOT-23-6

4573

Effective Inventory

Image for reference only

Manufacturer Part:

TPS562201SDDCR

Package:

SOT-23-6 (2.9 x 2.8 x 1.45mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS562201SDDCR from Texas Instruments is a 4.5V-to-17V input, 2A output synchronous step-down converter in a SOT-23-6 package. It features 600kHz switching frequency with D-CAP2 control mode for fast transient response and requires no external compensation components.

Key Specifications

Input Voltage Range 4.5V to 17V
Output Current 2A (continuous)
Output Voltage Range 0.6V to 6.5V (adjustable)
Switching Frequency 600 kHz (fixed)
Reference Voltage 0.6V (+/-1%)
MOSFET RDS(ON) High-side: 120mOhm, Low-side: 80mOhm
Quiescent Current 230 uA (typ)
Operating Temperature -40 to 125 C
Package SOT-23-6 (2.9 x 2.8 x 1.45mm)

Features

  • D-CAP2 control mode for fast transient without external compensation
  • Integrated 120mOhm/80mOhm MOSFETs for high efficiency
  • Auto-skip Eco-mode for light-load efficiency
  • Internal soft-start (1ms typical)

Applications

  • Point-of-load regulation for digital ICs
  • Set-top box and DVR power supplies
  • Consumer electronics power management
  • Broadband and networking equipment
  • 5V and 12V bus point-of-load conversion
Product Introduction: TPS562201SDDCR Product Introduction

The TPS562201SDDCR from Texas Instruments is a highly integrated synchronous step-down DC-DC converter delivering up to 2A from a 4.5V to 17V input. Using TI proprietary D-CAP2 control mode, it provides excellent transient response without requiring external compensation components, greatly simplifying design. The device integrates both high-side (120mOhm) and low-side (80mOhm) MOSFETs and operates at a fixed 600kHz switching frequency. In light-load conditions, the auto-skip Eco-mode reduces switching frequency to maintain high efficiency.

Working Principle: TPS562201SDDCR Working Principle

The TPS562201SDDCR employs TI D-CAP2 (Direct Control with Adaptive On-time) control architecture. **Control Subsystem**: D-CAP2 uses a comparator-based control loop that directly compares the output voltage against a 0.6V reference. Unlike voltage-mode control, no error amplifier or Type-III compensation is needed. An adaptive on-time generator adjusts the high-side MOSFET on-time to maintain a pseudo-constant 600kHz frequency. **Power Stage**: The integrated high-side N-channel MOSFET (120mOhm) and low-side N-channel MOSFET (80mOhm) form a synchronous buck topology. The low-side MOSFET replaces the traditional Schottky diode, reducing conduction losses. **Light-Load Operation**: In Eco-mode, when the inductor current reaches zero, the low-side MOSFET turns off and the converter enters discontinuous conduction mode (DCM), reducing switching losses at light loads. **Protection**: Over-current protection monitors the low-side MOSFET current. Undervoltage lockout (UVLO) prevents operation below 4.0V input. Thermal shutdown protects at approximately 150C junction temperature.

Pin Description: TPS562201SDDCR Pin Definition and Functions
Pin Name Description
1 SW Switching node (inductor connection)
2 VIN Input supply voltage (4.5V to 17V)
3 EN Enable input (high=on, low=shutdown)
4 FB Feedback voltage input (reference 0.6V)
5 MODE Mode selection (connect to GND for Eco-mode)
6 GND Ground
Application Scenarios: In which products and applications is TPS562201SDDCR used
  • Digital POL: Converting 5V or 12V rail to 1.2V/1.8V/3.3V for FPGA, CPU, and SoC core supplies
  • Consumer Electronics: Powering DDR memory and I/O rails in set-top boxes and smart TVs
  • Networking: Point-of-load conversion for Ethernet switches and routers from 12V bus
  • Industrial: 12V/24V to 5V/3.3V power for industrial sensors and communication modules
  • Broadband: DSL modem and cable modem regulated supply from 12V adapter
Alternative Models: What chips are recommended as replacements for TPS562201SDDCR
Model Manufacturer Key Difference
TPS563201SDDCR TI 3A version, same pinout
MP8759GD-Z MPS 4A, 36V, QFN-12, 500kHz
SY8113IABC Silergy 3A, 18V, 500kHz, SOT-23-6
BD9E102FJ-LB ROHM 2A, 18V, 1MHz, SOP-8
AP64500H-7 Diodes Inc 5A, 40V, 500kHz, DFN-12

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1