Opens in a new tab

EN5322QI

2A PowerSoC buck converter with integrated inductor, 2.4-5.5V in, 4MHz, QFN-24 (4x6mm)

4829

Effective Inventory

Image for reference only

Manufacturer Part:

EN5322QI

Package:

QFN-24 (4 x 6 x 1.1mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EN5322QI from Intel (Enpirion) is a 2A PowerSoC step-down DC-DC converter with an integrated inductor. Operating from 2.4V to 5.5V input, it delivers up to 2A continuous output current with up to 95% efficiency in a compact 4x6x1.1mm QFN-24 package.

Key Specifications

Input Voltage Range 2.4V to 5.5V
Output Voltage Range 0.6V to 4.9V (VID selectable)
Output Current 2A (continuous)
Switching Frequency 4 MHz (fixed)
Efficiency Up to 95%
Output Voltage Accuracy +/-3%
Quiescent Current 800 uA (operating)
Shutdown Current 17 uA
Output Ripple 8 mVp-p (typical)
Operating Temperature -40 to 85 C
Package QFN-24 (4 x 6 x 1.1mm)

Features

  • Integrated inductor eliminates external magnetic component
  • 3-pin VID for 7 pre-programmed output voltages
  • Dynamic voltage scaling via VID pins
  • Power-OK (POK) output monitor
  • Full protection: UVLO, OCP, short-circuit, thermal shutdown

Applications

  • Low-power processor and FPGA point-of-load regulation
  • LDO replacement with higher efficiency
  • Noise-sensitive RF and audio/video applications
  • Networking and communication equipment
  • Portable and battery-powered devices
Product Introduction: EN5322QI Product Introduction

The EN5322QI from Intel Enpirion is a highly integrated PowerSoC step-down DC-DC converter that incorporates the PWM controller, power MOSFETs, compensation circuitry, and inductor into a single 4x6x1.1mm QFN package. Operating at 4MHz fixed switching frequency, it delivers up to 2A of continuous output current with efficiency up to 95%. The integrated inductor eliminates the need for external magnetic components and ensures predictable EMI performance. VID pin-selectable output voltages and dynamic voltage scaling make it ideal for powering processors, FPGAs, and ASICs.

Working Principle: EN5322QI Working Principle

The EN5322QI employs a voltage-mode control architecture with integrated power stage and inductor. **Power Subsystem**: The integrated high-side and low-side MOSFETs switch at 4MHz, driving current through the integrated inductor. The high switching frequency allows the use of small MLCC input/output capacitors. **Control Loop**: A voltage-mode PWM controller with internal Type-III compensation ensures unconditional stability across the full input/output voltage and current range. The 4MHz switching frequency provides wide loop bandwidth for fast transient response. **VID Voltage Selection**: Three VID pins (VS0-VS2) select from 7 pre-programmed output voltages (0.8V to 3.3V) or an external resistor divider mode. VID changes take effect within one switching cycle for dynamic voltage scaling. **Protection Subsystem**: Undervoltage lockout (UVLO) prevents operation below minimum input voltage. Over-current protection (OCP) uses a hiccup-mode current limit. Thermal shutdown disables the converter when die temperature exceeds safe limits. The POK output signals when output voltage is within +/-10% of target.

Pin Description: EN5322QI Pin Definition and Functions
Pin Name Description
1 VIN Input supply voltage (2.4V to 5.5V)
2 VIN Input supply voltage (2.4V to 5.5V)
3 PGND Power ground
4 PGND Power ground
5-8 VOUT Output voltage (0.6V to 4.9V)
9 VOUT Output voltage feedback sense
10 POK Power-OK output (active high)
11 EN Enable input (active high)
12 VS0 VID select bit 0
13 VS1 VID select bit 1
14 VS2 VID select bit 2
15 AVIN Analog input supply (connect to VIN)
16 AGND Analog ground
17 VSET External voltage set (when VID=111)
Application Scenarios: In which products and applications is EN5322QI used
  • FPGA POL: Dynamic voltage scaling for Intel/AMD/Xilinx FPGA core and I/O rails
  • Processor Power: 2A core supply for ARM SoCs and DSPs with VID voltage selection
  • LDO Replacement: Higher efficiency alternative to LDOs in noise-sensitive applications
  • RF/Audio: Low-ripple 8mVp-p output suitable for noise-sensitive RF and A/V circuits
  • Networking: Compact POL regulation for Ethernet switches and routers
Alternative Models: What chips are recommended as replacements for EN5322QI
Model Manufacturer Key Difference
EN5312QI Intel 1A version, 5x4mm QFN
TPS82671SIPR TI 2A MicroSiP, 2.5-6V, 4MHz
LMZ20501SILR TI 1A nanoModule, 2.7-5.5V
ISL91301AIRNZ-T Renesas 2A, 2.5-5.5V, uModule
MAX38640AANT+T Maxim 1A, 1.8-5.5V, uSLIC

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1