Opens in a new tab

MCP6004T-I/SL

Quad 1MHz RRIO op-amp, 1.8-6V, 100uA Iq, 1pA Ib, SOIC-14, -40 to 85C

9932

Effective Inventory

Image for reference only

Manufacturer Part:

MCP6004T-I/SL

Package:

SOIC-14 (8.65 x 3.91 x 1.75mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP6004T-I/SL from Microchip Technology is a quad 1 MHz low-power operational amplifier with rail-to-rail input and output. Operating from a single 1.8V to 6.0V supply with only 100uA typical quiescent current per amplifier, it is available in a SOIC-14 package rated for -40 to 85 C operation.

Key Specifications

Number of Channels 4
Gain Bandwidth Product 1 MHz
Slew Rate 0.6 V/us
Supply Voltage Range 1.8V to 6.0V
Quiescent Current (per amp) 100 uA (typ)
Input Offset Voltage 4.5 mV (max)
Input Bias Current 1 pA (typ)
CMRR 60 dB (min)
Phase Margin 90 degrees (typ)
Operating Temperature -40 to 85 C
Package SOIC-14

Features

  • Rail-to-rail input and output (RRIO)
  • Ultra-low 100uA per-amplifier supply current
  • 1 pA input bias current for high-impedance sensors
  • Stable with capacitive loads up to 500pF
  • AEC-Q100 qualified

Applications

  • Battery-powered instrumentation
  • Sensor signal conditioning
  • Active filter circuits
  • Portable medical devices
  • General-purpose low-voltage amplification
Product Introduction: MCP6004T-I/SL Product Introduction

The MCP6004T-I/SL from Microchip Technology is a quad general-purpose operational amplifier optimized for low-power, single-supply applications. With rail-to-rail input and output capability, it can process signals from ground to VDD without signal clipping. The 1 MHz gain bandwidth product and 0.6 V/us slew rate make it suitable for low-frequency signal conditioning. The extremely low input bias current of 1 pA allows direct interfacing with high-impedance sensors. Operating from 1.8V to 6.0V with 100uA per-amplifier quiescent current, it is ideal for battery-powered portable instruments.

Working Principle: MCP6004T-I/SL Working Principle

The MCP6004T-I/SL employs a CMOS rail-to-rail operational amplifier architecture. **Input Stage**: A complementary PMOS/NMOS differential pair provides rail-to-rail common-mode input range from VSS-0.3V to VDD+0.3V. The MOS input stage results in virtually zero input bias current (1 pA typical). **Gain Stage**: A high-gain stage with internal compensation provides the 1 MHz gain-bandwidth product. The dominant pole compensation capacitor ensures unconditional stability with unity-gain feedback and capacitive loads up to 500pF. **Output Stage**: A CMOS push-pull output stage swings rail-to-rail, reaching within millivolts of both supply rails under light load. The output can source and sink up to 23mA. **Bias Circuit**: A low-power bias network consumes only 100uA per amplifier. The 90-degree phase margin provides excellent settling behavior and stability in feedback circuits.

Pin Description: MCP6004T-I/SL Pin Definition and Functions
Pin Name Description
1 VOUT A Channel A output
2 VIN- A Channel A inverting input
3 VIN+ A Channel A non-inverting input
4 VSS Negative supply / ground
5 VIN+ B Channel B non-inverting input
6 VIN- B Channel B inverting input
7 VOUT B Channel B output
8 VOUT C Channel C output
9 VIN- C Channel C inverting input
10 VIN+ C Channel C non-inverting input
11 VSS Negative supply / ground
12 VIN+ D Channel D non-inverting input
13 VIN- D Channel D inverting input
14 VOUT D Channel D output
Application Scenarios: In which products and applications is MCP6004T-I/SL used
  • Sensor Interface: pH, photodiode, and piezoelectric sensor amplification with 1pA input bias
  • Battery Instruments: Portable multimeter and data logger front-ends operating from 2-cell batteries
  • Active Filters: 2nd-4th order Butterworth and Chebyshev filters for anti-aliasing and noise rejection
  • Medical Devices: ECG, EMG, and biopotential measurement with rail-to-rail signal handling
  • Process Control: 4-20mA receiver amplifiers and signal conditioning for industrial sensors
Alternative Models: What chips are recommended as replacements for MCP6004T-I/SL
Model Manufacturer Key Difference
MCP6004T-E/SL Microchip Extended temp -40 to 125C
LM324DR TI 30V, 1.2MHz, NOT pin-compatible
TLV274IPWR TI 3MHz, 2.7-16V, RRIO, TSSOP-14
OPA4340UA TI 5.5MHz, 2.5-5.5V, RRIO, SOIC-14
TSV914IPT ST 8MHz, 2.5-5.5V, RRIO, TSSOP-14

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1