Opens in a new tab

ESP32-WROOM-32D

Dual-core 240MHz WiFi+BT+BLE module, 4MB Flash, PCB antenna, 18×25.5mm

7518

Effective Inventory

Image for reference only

Manufacturer Part:

ESP32-WROOM-32D

Package:

Module (18 x 25.5 x 3.1mm, 38 pins)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ESP32-WROOM-32D from Espressif Systems is a Wi-Fi + Bluetooth + BLE module based on the ESP32-D0WD dual-core processor running at up to 240 MHz. It features 4MB SPI flash, integrated PCB antenna, and comprehensive peripheral set in a compact 18×25.5×3.1mm module.

Key Specifications

Processor Xtensa dual-core 32-bit LX6 @ 240 MHz
Flash Memory 4 MB SPI (on module)
SRAM 520 KB (on chip)
ROM 448 KB
Wi-Fi 802.11 b/g/n, up to 150 Mbps
Bluetooth BT v4.2 BR/EDR + BLE
GPIO Up to 32
ADC 2x 12-bit, 18 channels
Interfaces SPI, I2C, I2S, UART, CAN, SDIO
Supply Voltage 3.0V to 3.6V
Deep Sleep Current <5 uA
TX Power Up to 20 dBm
Operating Temperature -40 to 85 C
Module Dimensions 18 x 25.5 x 3.1mm

Features

  • Dual-core 240 MHz processor with FreeRTOS and LWIP stack
  • Integrated PCB antenna with FCC/CE/IC/TELEC certification
  • Hardware accelerated TLS 1.2 and secure OTA updates
  • Capacitive touch sensors, Hall effect sensor, temperature sensor

Applications

  • IoT gateways and smart home devices
  • Wearable electronics and fitness trackers
  • Industrial wireless sensor networks
  • Audio streaming and voice encoding
  • Smart meters and energy monitoring
Product Introduction: ESP32-WROOM-32D Product Introduction

The ESP32-WROOM-32D from Espressif Systems is a versatile Wi-Fi and Bluetooth combination module built around the ESP32-D0WD chip. With a dual-core Xtensa LX6 processor running at up to 240 MHz, 520 KB SRAM, and 4 MB SPI flash, it provides ample resources for complex IoT applications. The module integrates a PCB antenna certified under FCC, CE, IC, and TELEC regulations, simplifying RF design. It supports 802.11 b/g/n Wi-Fi up to 150 Mbps, Bluetooth v4.2 BR/EDR, and BLE simultaneously. Rich peripherals include capacitive touch, Hall effect sensor, SD card, Ethernet MAC, and multiple communication interfaces.

Working Principle: ESP32-WROOM-32D Working Principle

The ESP32-WROOM-32D integrates a complete wireless SoC with dual-core processor and RF subsystem. **Processing Subsystem**: Two Xtensa LX6 cores run independently at up to 240 MHz with FreeRTOS. Core 0 typically handles Wi-Fi/BT protocol stack while Core 1 runs user application code. 520 KB SRAM is shared between cores, and 448 KB ROM stores boot code and basic functions. **Wireless Subsystem**: The 2.4 GHz radio supports Wi-Fi 802.11 b/g/n with OFDM modulation up to MCS7 (150 Mbps). Bluetooth v4.2 supports both Classic (BR/EDR with A2DP, AVRCP) and Low Energy (BLE with GATT profiles). Wi-Fi and BLE can operate concurrently using time-division multiplexing. **Power Management**: Multiple sleep modes optimize power consumption. Deep sleep mode draws less than 5 uA while retaining RTC memory. Light sleep at 0.8 mA maintains Wi-Fi connection state. **Peripheral Subsystem**: A flexible GPIO matrix allows most peripherals to be mapped to any GPIO pin. 12-bit ADC, DAC, capacitive touch, PWM, I2C, SPI, I2S, and UART interfaces support diverse sensor and actuator connections.

Pin Description: ESP32-WROOM-32D Pin Definition and Functions
Pin Name Description
1 GND Ground
2 3V3 3.3V power supply
3 EN Chip enable / reset (active high)
4-31 GPIO0-GPIO39 General-purpose I/O (32 usable GPIOs)
32 GND Ground
33-38 GPIO/ADC ADC input and general-purpose I/O
Application Scenarios: In which products and applications is ESP32-WROOM-32D used
  • Smart Home: Wi-Fi connected lighting, thermostats, and security cameras with BLE provisioning
  • Industrial IoT: Wireless sensor gateways aggregating BLE sensor data to cloud via Wi-Fi
  • Wearable Devices: Battery-powered health monitors using deep sleep for extended runtime
  • Audio Applications: Voice assistants and streaming devices leveraging dual-core I2S processing
  • Smart Metering: Wi-Fi connected energy and water meters with secure TLS 1.2 communication
Alternative Models: What chips are recommended as replacements for ESP32-WROOM-32D
Model Manufacturer Key Difference
ESP32-WROOM-32U Espressif External antenna connector (u.FL)
ESP32-S3-WROOM-1 Espressif ESP32-S3, 240MHz, WiFi+BLE5, AI acceleration
ESP32-C3-WROOM-02 Espressif RISC-V, 160MHz, WiFi+BLE5, lower power
BL602-WRAN-01 Bouffalo Lab RISC-V, WiFi+BLE5.0, 4MB Flash
RTL8720DN-WiFi Realtek Dual-band WiFi (2.4+5GHz) + BLE

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1