Opens in a new tab

MT3608

2A boost converter, 2-24V in, up to 28V out, 1.2MHz, SOT-23-6, popular DIY boost module

14957

Effective Inventory

Image for reference only

Manufacturer Part:

MT3608

Package:

SOT-23-6 (2.9 x 2.8 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MT3608 from Aerosemi is a 2A step-up (boost) DC-DC converter with a fixed 1.2MHz switching frequency. Operating from 2V to 24V input, it can generate output voltages up to 28V with internal 1.2A switch current limit in a compact SOT-23-6 package.

Key Specifications

Input Voltage Range 2V to 24V
Output Voltage Range VIN to 28V (adjustable)
Switch Current Limit 1.2A (internal MOSFET)
Output Current Up to 2A (depends on VIN/VOUT ratio)
Switching Frequency 1.2 MHz (fixed)
Reference Voltage 0.6V
Shutdown Current <1 uA
Efficiency Up to 93%
Operating Temperature -40 to 85 C
Package SOT-23-6

Features

  • Internal 1.2A N-channel MOSFET switch
  • Fixed 1.2MHz frequency allows small external components
  • Adjustable output voltage via external resistor divider
  • Internal soft-start and current mode control
  • Under-voltage lockout and over-temperature protection

Applications

  • Battery-powered boost converters
  • OLED and LCD bias supplies
  • LED string drivers
  • USB power bank boost circuits
  • Solar-powered energy harvesting
Product Introduction: MT3608 Product Introduction

The MT3608 from Aerosemi is a compact and cost-effective step-up (boost) DC-DC converter with an integrated 1.2A N-channel MOSFET. Operating from 2V to 24V input, it can boost the voltage up to 28V output using a fixed 1.2MHz switching frequency. The current-mode control architecture provides fast transient response and stable operation. With efficiency up to 93% and a shutdown current below 1uA, it is widely used in battery-powered boost applications, USB power banks, and bias supply generation for displays.

Working Principle: MT3608 Working Principle

The MT3608 employs a current-mode boost converter architecture. **Power Stage**: The internal N-channel MOSFET switches at 1.2MHz, storing energy in an external inductor during the on-time and releasing it to the output through an external Schottky diode during the off-time. **Control Loop**: Current-mode control compares the peak inductor current against the error amplifier output. This architecture provides inherent cycle-by-cycle current limiting and simplifies loop compensation. The output voltage is set by an external resistor divider connected to the FB pin (reference 0.6V). **Soft-Start**: Internal soft-start gradually increases the current limit during startup, preventing excessive inrush current that could damage the input supply or cause output overshoot. **Protection**: Under-voltage lockout (UVLO) prevents operation when input voltage drops below approximately 1.6V. Thermal shutdown protects the device when junction temperature exceeds safe limits.

Pin Description: MT3608 Pin Definition and Functions
Pin Name Description
1 LX Switching node (inductor connection, internal MOSFET drain)
2 GND Ground
3 EN Enable input (high=on, low=shutdown)
4 FB Feedback voltage input (reference 0.6V)
5 VIN Input supply voltage (2V to 24V)
6 LX Switching node (inductor connection, internal MOSFET drain)
Application Scenarios: In which products and applications is MT3608 used
  • Power Banks: Boosting single-cell Li-ion (3.7V) to 5V USB output for portable charging
  • Display Bias: Generating 12V-15V bias voltage for OLED and TFT-LCD modules from 3.3V/5V
  • LED Drivers: Powering series LED strings from low-voltage battery sources
  • Solar Harvesting: Boosting low-voltage solar panel output to usable voltage levels
  • Arduino Projects: 5V to 12V boost for motor drivers and relay modules from USB power
Alternative Models: What chips are recommended as replacements for MT3608
Model Manufacturer Key Difference
MT3608 with module Aerosemi Pre-assembled boost module with potentiometer
XL6009E1 XLSEMI 4A, 35V output, 400kHz, TO-263
LM2733XMF TI 1A, 2.7-14V in, 1.6MHz, SOT-23-5
TPS61021ADSGR TI 3A, 0.5-5.5V in, 2.5MHz, WQFN
SX1308 Suosemi 2A, 2-24V in, 28V out, SOT-23-6, pin-compatible

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1