Opens in a new tab

NCP1117DT33T5G

3.3V 1A LDO, 1.2V dropout, DPAK-3, AEC-Q100, automotive grade

6342

Effective Inventory

Image for reference only

Manufacturer Part:

NCP1117DT33T5G

Package:

DPAK-3 / TO-252-3 (6.6 x 6.0 x 2.3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NCP1117DT33T5G from onsemi is a 3.3V fixed-output LDO voltage regulator capable of delivering up to 1A output current. With a dropout voltage of 1.2V at 800mA and internal current limiting, it is available in a DPAK-3 surface-mount package suitable for industrial applications.

Key Specifications

Output Voltage 3.3V (fixed, +/-1%)
Output Current 1A (max)
Input Voltage Range 4.5V to 20V
Dropout Voltage 1.2V at 800mA
Line Regulation 0.2% (typical)
Load Regulation 0.2% (typical)
Quiescent Current 5 mA (typical)
Operating Temperature -40 to 125 C
Package DPAK-3 (TO-252-3)

Features

  • 1A output current in surface-mount DPAK package
  • Internal current limiting and thermal shutdown
  • +/-1% output voltage accuracy
  • No minimum load requirement
  • AEC-Q100 qualified for automotive use

Applications

  • 3.3V MCU and FPGA power supplies
  • Post-regulation for switching converters
  • Automotive ECU 3.3V rails
  • Industrial control system regulation
  • Battery charger regulation
Product Introduction: NCP1117DT33T5G Product Introduction

The NCP1117DT33T5G from onsemi is a 3.3V fixed-output low-dropout linear voltage regulator from the NCP1117 series. Capable of delivering up to 1A, it features a dropout voltage of 1.2V at 800mA load and +/-1% output voltage accuracy. The internal current limiting and thermal shutdown provide robust protection. AEC-Q100 qualified, it is suitable for automotive ECU power supplies. The DPAK-3 surface-mount package offers excellent thermal dissipation for 1A output in a compact footprint.

Working Principle: NCP1117DT33T5G Working Principle

The NCP1117DT33T5G operates as a series linear voltage regulator with PNP pass transistor. **Reference Subsystem**: A trimmed bandgap reference provides the stable 3.3V output with +/-1% accuracy over temperature and line/load variations. **Error Amplifier**: A differential amplifier compares the output voltage against the internal reference. The error signal drives the PNP pass transistor to maintain regulation. **Pass Transistor**: The PNP pass element enables low dropout operation (1.2V at 800mA) compared to NPN-based designs. At 1A output, the device dissipates significant power (PD = (VIN-VOUT) x IOUT), requiring proper PCB thermal design. **Protection Subsystem**: Current limiting restricts output current to approximately 1.2A during overload. Thermal shutdown activates when junction temperature exceeds approximately 155C, cycling on and off until the fault is removed. **Stability**: A minimum 10uF output capacitor is required for stability. Tantalum or low-ESR ceramic capacitors ensure proper phase margin in the feedback loop.

Pin Description: NCP1117DT33T5G Pin Definition and Functions
Pin Name Description
1 GND/ADJ Ground (fixed voltage version)
2 VOUT Regulated 3.3V output (connected to tab)
3 VIN Unregulated input voltage (4.5V to 20V)
Tab VOUT Thermal tab, electrically connected to VOUT (Pin 2)
Application Scenarios: In which products and applications is NCP1117DT33T5G used
  • Automotive ECU: Regulating 5V vehicle supply to 3.3V for MCU and CAN transceiver power
  • FPGA Power: Clean 3.3V I/O supply for Lattice and Xilinx FPGAs from 5V input
  • Industrial Control: Post-regulation of 5V switching supply to low-noise 3.3V
  • Battery Devices: Regulating Li-ion battery (4.2V) to 3.3V for IoT and sensor nodes
  • Communication: 3.3V rail for Ethernet PHY and RS-485 transceiver circuits
Alternative Models: What chips are recommended as replacements for NCP1117DT33T5G
Model Manufacturer Key Difference
LM1117DT-3.3 TI Pin-compatible, 800mA, DPAK
AMS1117-3.3 AMS 1A, 1.1V dropout, SOT-223
LD1117DT33TR ST 800mA, 1.1V dropout, DPAK
NCV1117DT33T5G onsemi Automotive PPAP version, same specs
AP1117D33LI-TRG Diodes Inc 1A, 1.2V dropout, DPAK, low ESR stable

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1