Opens in a new tab

EPCS64SI16N

64Mbit serial Flash for Altera FPGA configuration, AS interface, 3.3V, SOIC-16

9477

Effective Inventory

Image for reference only

Manufacturer Part:

EPCS64SI16N

Package:

SOIC-16 300mil (10.3 x 7.5 x 2.35mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EPCS64SI16N from Intel (Altera) is a 64Mbit serial Flash memory configuration device designed for FPGA configuration. It supports 3.3V operation with 16-pin SOIC packaging and provides active serial (AS) configuration for Cyclone and Stratix FPGA families.

Key Specifications

Density 64 Mbit (8 MB)
Interface Active Serial (SPI-compatible)
Supply Voltage 3.0V to 3.6V
Max Clock Frequency 20 MHz
Page Size 256 bytes
Sector Size 65,536 bytes
Programming Time 1.5s typical (full chip)
Endurance 100,000 erase/program cycles
Data Retention 20 years
Operating Temperature -40 to 85 C
Package SOIC-16 (300mil)

Features

  • Optimized for Altera FPGA active serial configuration
  • Supports DCLK clock rates up to 20MHz
  • In-system programmable via JTAG or USB-Blaster
  • Low-power operation with deep-sleep mode
  • Compatible with Cyclone, Cyclone II, and Stratix series

Applications

  • FPGA configuration storage for Altera/Intel devices
  • Embedded system boot firmware
  • Multi-FPGA configuration chains
  • Remote firmware update systems
  • Industrial control and automation logic
Product Introduction: EPCS64SI16N Product Introduction

The EPCS64SI16N from Intel is a 64Mbit serial configuration device specifically designed for active serial (AS) configuration of Altera FPGA families including Cyclone and Stratix. The device stores the FPGA configuration bitstream and automatically loads it upon power-up when connected to the FPGA’s AS configuration interface. It supports clock rates up to 20MHz for fast configuration times and can be reprogrammed in-system through the FPGA’s JTAG interface or a dedicated programming header.

Working Principle: EPCS64SI16N Working Principle

The EPCS64SI16N operates as a serial Flash memory optimized for FPGA configuration. **Active Serial Configuration**: When the FPGA powers up in AS mode, it drives the serial clock (DCLK) and reads configuration data from the EPCS device. The FPGA asserts nCS to select the device, then clocks out data serially on the DATA pin. The entire configuration process is controlled by the FPGA’s built-in configuration controller. **Memory Architecture**: The 64Mbit array is organized as 256-byte pages within 65,536-byte sectors. Page programming writes 256 bytes at a time, while erase operations affect entire sectors. **In-System Programming**: The device can be reprogrammed through the FPGA’s JTAG interface using Intel Quartus software and a USB-Blaster cable. This enables remote firmware updates without physical access to the device. **Multi-Device Chains**: Multiple EPCS devices can be cascaded to configure multiple FPGAs, with the nCS-to-nCS chaining allowing sequential access.

Pin Description: EPCS64SI16N Pin Definition and Functions
Pin Name Description
1 nCS Chip select (active low)
2 DATA Serial data output to FPGA
3 DCLK Serial clock from FPGA
4-8 NC/ASDI No connect / serial data input
9 ASDI Active serial data input
10 nCONFIG Configuration reset (active low)
11-14 VCC/GND Power and ground pins
15 nHOLD Suspend operation (active low)
16 nWP Write protect (active low)
Application Scenarios: In which products and applications is EPCS64SI16N used
  • Cyclone FPGA Config: Primary configuration device for Cyclone IV and Cyclone 10 LP FPGAs
  • Stratix Boot: Configuration storage for Stratix series with AS interface
  • Multi-FPGA: Cascaded configuration chain for systems with multiple FPGAs
  • Remote Update: In-system reprogramming via JTAG for field firmware updates
  • Industrial Logic: Configuration storage for FPGA-based industrial control systems
Alternative Models: What chips are recommended as replacements for EPCS64SI16N
Model Manufacturer Key Difference
EPCS128SI16N Intel 128Mbit density, same package
EPCS16SI8N Intel 16Mbit, 8-pin SOIC
EPCQ128ASI16N Intel 128Mbit, quad SPI, faster config
M25P80-VMN6P Numonyx 8MB SPI Flash, SOIC-16
S25FL064P0XMFI001 Infineon 64Mbit SPI Flash, SOIC-16

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1