Opens in a new tab

MCZ33291LEGR2

Octal low-side driver, SPI, 45V/500mA/ch, fault detection, AEC-Q100, LQFP-32

13558

Effective Inventory

Image for reference only

Manufacturer Part:

MCZ33291LEGR2

Package:

LQFP-32 (7 x 7 x 1.4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCZ33291LEGR2 from NXP Semiconductors is an octal serial-input/power-output driver with fault detection and SPI interface. Designed for automotive and industrial applications, it drives 8 low-side outputs rated at 45V/500mA per channel with diagnostic feedback via 16-bit SPI.

Key Specifications

Output Channels 8 (low-side)
Output Current per Channel 500 mA (continuous)
Supply Voltage 4.5V to 5.5V (logic), up to 45V (output)
Interface SPI (16-bit, up to 5MHz)
On-Resistance 1.0 Ohm (typical per channel)
Fault Detection Open-load, short-to-battery, overtemperature
Operating Temperature -40 to 125 C
Package LQFP-32 (7x7mm)

Features

  • 8 independent low-side output drivers with fault detection
  • SPI interface for control and diagnostics
  • Open-load detection in both ON and OFF states
  • Over-temperature shutdown with auto-retry
  • AEC-Q100 qualified for automotive use

Applications

  • Automotive lamp and solenoid driving
  • Industrial relay and valve control
  • Body electronics module
  • Motor driver pre-drivers
  • General-purpose power output stages
Product Introduction: MCZ33291LEGR2 Product Introduction

The MCZ33291LEGR2 from NXP is an octal serial-input/power-output driver designed for automotive and industrial control applications. It combines 8 low-side power output stages with a 16-bit SPI interface for control and diagnostic reporting. Each output can drive 500mA continuously at up to 45V, with integrated fault detection for open-load (both ON and OFF states), short-to-battery, and over-temperature conditions. The device is AEC-Q100 qualified and provides comprehensive protection and diagnostic features essential for automotive body electronics.

Working Principle: MCZ33291LEGR2 Working Principle

The MCZ33291LEGR2 operates as an 8-channel low-side driver with integrated diagnostics controlled via SPI. **SPI Interface**: A 16-bit SPI frame is used for both control and status reporting. The first 8 bits control the output states (ON/OFF for each channel), while the second 8 bits report fault status (open-load, short-circuit, over-temperature). The SPI runs at up to 5MHz for fast control loop response. **Output Drivers**: Each channel is an N-channel MOSFET low-side switch with 1.0 Ohm typical on-resistance. The driver pulls the output to ground when ON, allowing current to flow through the load connected between the supply and the output pin. **Fault Detection**: Open-load detection works in both ON state (insufficient current flow) and OFF state (leakage current detected). Short-to-battery detection identifies when the output is driven high externally. Over-temperature protection shuts down affected channels and reports the fault via SPI. **Watchdog**: An internal watchdog timer disables all outputs if SPI communication is not refreshed within a timeout period, providing a fail-safe mechanism.

Pin Description: MCZ33291LEGR2 Pin Definition and Functions
Pin Name Description
1 VCC Logic supply (4.5-5.5V)
2 CS SPI chip select (active low)
3 SCLK SPI clock input
4 MOSI SPI data input
5 MISO SPI data output (diagnostics)
6-13 OUT0-OUT7 8 power output drivers
14 VPWR Output supply (up to 45V)
15 GND Ground
16 RST Reset input (active low)
Application Scenarios: In which products and applications is MCZ33291LEGR2 used
  • Automotive Lighting: Driving multiple LED lamps and bulbs in body control modules
  • Industrial Valves: Controlling solenoid valves in factory automation systems
  • Relay Control: Driving 8 relay coils from SPI interface with fault monitoring
  • Motor Pre-Drivers: Gate drive pre-amplifiers for motor driver H-bridges
  • Building Automation: Multi-zone HVAC damper and valve control
Alternative Models: What chips are recommended as replacements for MCZ33291LEGR2
Model Manufacturer Key Difference
MC33996EKR2 NXP 16-channel version, similar architecture
TPIC6C595DR TI 8-bit shift register, 250mA per output
TPL9201RUQR TI 8-ch driver, SPI, 50V/500mA
ULN2803ADW TI 8-ch Darlington, 500mA, no SPI
DRV8860ATPY TI 8-ch low-side, SPI, HTSSOP-20

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL41050TA-3E

NVE IL41050TA-3E IsoLoop isolated CAN transceiver, 2.5kVrms isolation, 1Mbps, 16-SOIC

Brand: nve

Package: SOIC-16 NB

IN STOCK: 3150pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4115TRLPBF

IRFS4115TRLPBF – 150V N-Channel HEXFET Power MOSFET, 12.1 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 6965pcs

Cargo cycle: 3-7 Days

The minimum order is 1

2N2905A

PNP switching transistor, -60V, -600mA, TO-39 metal can, MIL-qualified, 200MHz fT

Brand: ON

Package: TO-39 Metal Can (9.4mm dia x 6.6mm)

IN STOCK: 5382pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MX29LV800CBTI-70G

8Mbit Parallel NOR Flash, Bottom Boot, 70ns, 2.7-3.6V, 48-TSOP

Brand: Macronix

Package: 48-TSOP

IN STOCK: 9345pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMC7101AIM5X/NOPB

Single CMOS RRIO op-amp, 1.4MHz, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 11389pcs

Cargo cycle: 3-7 Days

The minimum order is 1