Opens in a new tab

SA58631TK

1W BTL audio amplifier with 32-step DC volume control, 0.1% THD+N, HVQFN-16 3x3mm

14333

Effective Inventory

Image for reference only

Manufacturer Part:

SA58631TK

Package:

HVQFN-16 (3x3x0.85mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SA58631TK from NXP Semiconductors is a 1W BTL audio amplifier with integrated DC volume control in an HVQFN-16 (3x3mm) package. Operating from 2.5V-5.5V, it features 32-step digital volume control and 0.1% THD+N for clean audio reproduction in portable devices.

Key Specifications

Output Power 1W @8Ω, 5V, THD=10%
Supply Voltage 2.5V – 5.5V
Gain 20dB fixed or adjustable
DC Volume Control 32 steps
Quiescent Current 3mA (typ)
Shutdown Current 100nA
THD+N 0.1% @1kHz, 0.5W
PSRR 60dB
Operating Temperature -40°C to +85°C
Package HVQFN-16 (3x3mm)

Features

  • 1W BTL output for direct speaker drive without coupling capacitors
  • 32-step DC volume control eliminates external potentiometer
  • 0.1% THD+N for high-fidelity audio reproduction
  • 100nA shutdown current for ultra-low standby power
  • Pop-and-click suppression for clean power transitions
  • Short-circuit and thermal protection

Applications

  • Portable speaker and Bluetooth speaker amplification
  • Mobile phone hands-free speaker driver
  • Portable gaming device audio output
  • GPS navigation voice output amplifier
Product Introduction: SA58631TK Product Introduction

The SA58631TK from NXP Semiconductors is a Bridge-Tied Load (BTL) audio amplifier with integrated 32-step DC volume control. Delivering 1W into an 8Ω speaker from a 5V supply, it eliminates the need for an external volume potentiometer by accepting a DC voltage level to set the gain. The 0.1% THD+N at 0.5W ensures clean audio quality, while the 100nA shutdown current preserves battery life in portable applications. The compact HVQFN-16 (3x3mm) package enables integration in space-constrained portable audio designs.

Working Principle: SA58631TK Working Principle

The SA58631TK uses a Bridge-Tied Load (BTL) output configuration where two amplifiers drive the speaker differentially, doubling the voltage swing across the load compared to single-ended designs. This allows 1W output from a 5V supply without large DC-blocking capacitors. The DC volume control works by comparing an external DC voltage on the VOLUME pin with an internal reference ladder, selecting one of 32 gain settings. The input stage includes a differential amplifier that rejects common-mode noise. Pop-and-click suppression circuitry gradually ramps the output common-mode voltage during power-on/off transitions, preventing audible transients in the speaker.

Pin Description: SA58631TK Pin Definition and Functions
Pin Name Description
1 VDD Power supply (2.5-5.5V)
2 VOLUME DC volume control input
3-4 IN+/IN- Differential audio input
5 BYPASS Internal reference bypass
6 SVDD Speaker amplifier supply
7-8 OUT+/OUT- BTL speaker output
9 SGND Signal ground
10 PGND Power ground
11 /SD Shutdown control (active low)
12-16 NC/RES No connect / Reserved
Application Scenarios: In which products and applications is SA58631TK used
  • Portable Bluetooth speaker and wireless audio amplification
  • Mobile phone hands-free speakerphone output
  • Portable gaming console audio driver
  • GPS and navigation device voice output
Alternative Models: What chips are recommended as replacements for SA58631TK
Model Manufacturer Pout THD+N Volume
SA58632TK NXP 1W 0.1% I2C
TS4990 ST 1.2W 0.2% None
LM4871 TI 1W 0.5% None
PAM8302A Diodes Inc 1.5W 0.2% None

Recommend Parts

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GRM155R60J225ME15D

MLCC 0402, 2.2uF, 6.3V, X5R, +/-20%, miniature decoupling, Murata GRM

Brand: Murata

Package: 0402 (1.0 x 0.5 x 0.5 mm, EIA 1005)

IN STOCK: 37062pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF1010EPBF

60V N-channel HEXFET power MOSFET, 84A, 3.4mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 5680pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS7A3301RGWR

Negative high-voltage ultra-low-noise LDO, -36V, VQFN-20

Brand: TI

Package: VQFN-20 (3.5 x 3.5 mm, RGW package)

IN STOCK: 13748pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFZ48NPBF

IRFZ48NPBF – 55V N-Channel HEXFET Power MOSFET, 14 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 7523pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX16-2FTG256C

Spartan-6 LX FPGA, 14579 logic cells, 32 DSP, 576KB BRAM, 186 I/O, FTBGA-256 17x17mm, -2 speed, commercial 0-85C, AMD Xilinx

Brand: xilinx

Package: FTG256 (256-ball fine-pitch thin BGA, 17x17mm body, 1.0mm ball pitch, 16×16 ball array, 4 I/O banks)

IN STOCK: 2450pcs

Cargo cycle: 3-7 Days

The minimum order is 1