Opens in a new tab

EN5335QI

3A PowerSoC buck converter with integrated inductor, 4MHz, 0.6-3.6Vout, QFN-24 7x4mm

13531

Effective Inventory

Image for reference only

Manufacturer Part:

EN5335QI

Package:

QFN-24 (7x4mm, integrated inductor)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EN5335QI from Intel (formerly Altera/Enpirion) is a 3A PowerSoC synchronous buck DC-DC converter with integrated inductor in a QFN-24 (7x4mm) package. Operating at 4MHz with 0.6V-3.6V adjustable output and 93% peak efficiency, it delivers a complete power supply in a single component.

Key Specifications

Input Voltage 2.4V – 5.5V
Output Current 3A
Output Voltage 0.6V – 3.6V adjustable
Switching Frequency 4MHz
Efficiency Up to 93%
Output Ripple 8mVp-p (typ)
Quiescent Current 800µA
Shutdown Current 17µA
Operating Temperature -40°C to +85°C
Package QFN-24 (7x4mm, integrated inductor)

Features

  • Integrated inductor — no external magnetic component required
  • 4MHz switching frequency for ultra-fast transient response
  • 0.6V-3.6V adjustable output for FPGA/SoC core and I/O rails
  • 93% peak efficiency with only 8mVp-p output ripple
  • Complete PowerSoC solution in a single 7x4mm QFN package
  • Internal soft-start, OCP, OTP, and UVLO protection

Applications

  • FPGA and SoC core and I/O voltage regulation
  • Point-of-load power for Altera/Intel FPGAs
  • Portable and space-constrained power supplies
  • High-density board power distribution
Product Introduction: EN5335QI Product Introduction

The EN5335QI from Intel is a 3A PowerSoC (Power System-on-Chip) synchronous buck converter that integrates the power MOSFETs, controller, and inductor into a single QFN-24 (7x4mm) package. This integration eliminates the need for external inductor selection, PCB layout optimization, and EMI filtering associated with discrete DC-DC converter designs. The 4MHz switching frequency provides fast transient response for demanding FPGA core rails, while the 93% peak efficiency and 8mVp-p output ripple deliver clean, efficient power in a fraction of the board area of traditional solutions.

Working Principle: EN5335QI Working Principle

The EN5335QI uses a current-mode synchronous buck topology operating at a fixed 4MHz switching frequency. The integrated inductor is fabricated using thick-film magnetic material deposited directly on the silicon die, providing the energy storage element without a discrete external component. The high-side and low-side MOSFETs are integrated on the same die as the controller, minimizing parasitic inductance and resistance in the power path. The current-mode control loop measures the inductor current directly and adjusts the duty cycle to maintain output regulation. The 4MHz frequency allows the control loop bandwidth to exceed 200kHz, providing sub-10µs transient recovery for FPGA load steps.

Pin Description: EN5335QI Pin Definition and Functions
Pin Name Description
1-2 VIN Input supply (2.4-5.5V)
3-4 PGND Power ground
5-6 SW Switching node (internal inductor)
7 VOUT Regulated output voltage
8 FB Feedback voltage (0.6V reference)
9 SS/REF Soft-start / reference adjust
10 EN Enable input
11 PG Power good output
12 AGND Analog ground
13-24 GND/NC Ground / No connect (thermal)
Application Scenarios: In which products and applications is EN5335QI used
  • Intel/Altera FPGA core voltage (0.9V-1.2V) regulation from 3.3V/5V
  • SoC and processor I/O rail (1.8V, 2.5V, 3.3V) point-of-load supply
  • High-density PCB power distribution with minimal footprint
  • Portable and wearable device compact power conversion
Alternative Models: What chips are recommended as replacements for EN5335QI
Model Manufacturer Iout Vin Integrated L
EN5336QI Intel 3A 2.4-5.5V Yes
EN5364QI Intel 6A 2.5-5.5V Yes
TPS82671 TI 0.5A 2.3-4.5V Yes
LMZ21700 TI 1A 2.7-5.5V Yes

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1