Opens in a new tab

FPF2700MX

AccuPower 2.8-36V load switch, 0.4-2A adjustable current limit, 88mΩ RDS(ON), auto-restart, SOIC-8

7850

Effective Inventory

Image for reference only

Manufacturer Part:

FPF2700MX

Package:

SOIC-8 (4.9 x 3.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The FPF2700MX from onsemi is an AccuPower series current-limiting load switch in an SOIC-8 package. It integrates a slew-rate controlled N-channel MOSFET with 88mΩ typical RDS(ON) and provides adjustable current limiting from 0.4A to 2A. Operating from a 2.8V to 36V input range, it offers comprehensive protection including overcurrent, overtemperature, and undervoltage lockout, with auto-restart fault response for the FPF2700 variant.

Key Specifications

Input Voltage Range 2.8V to 36V
RDS(ON) (typical) 88mΩ
Current Limit (adjustable) 0.4A to 2A
Max Output Current 2A
On Control Active LOW
Fault Response (FPF2700) Auto-restart after blanking time
Power Good Output Yes (open-drain)
Fault Flag Yes (active-low, open-drain)
Turn-On Delay 2.7ms (typical)
Operating Temperature -40°C to +85°C
Package SOIC-8 (4.9 x 3.9 mm)

Features

  • Adjustable current limit: 0.4A to 2A via external resistor
  • Slew-rate controlled turn-on for hot-swap applications
  • Active LOW enable with UVLO protection
  • Power Good and Fault flag outputs
  • Overtemperature shutdown protection
  • ESD protection above 2000V HBM
  • Auto-restart after fault clearing (FPF2700)

Applications

  • Hot-swap power insertion
  • Hard disk drive power management
  • Motor drive current limiting
  • Digital camera power control
  • Telecom equipment power distribution
Product Introduction: FPF2700MX Product Introduction

The FPF2700MX from onsemi’s AccuPower series is a high-side N-channel load switch with adjustable current limiting designed to protect systems and loads from overcurrent conditions. The device integrates a 88mΩ N-channel MOSFET with slew-rate controlled turn-on, preventing power bus disturbances during hot-swap events. Current limit is programmed via an external resistor on the ISET pin, adjustable from 0.4A to 2A minimum. The FPF2700 variant responds to overloads exceeding the blanking time by disconnecting the load and automatically retrying after a restart timer. Additional features include active-LOW ON control, undervoltage lockout, power-good output, and fault flag output for monitoring. The SOIC-8 package is suitable for space-constrained applications.

Working Principle: FPF2700MX Working Principle

The FPF2700MX operates as a high-side N-channel MOSFET switch controlled by an internal charge pump that generates the gate drive voltage above the input supply. The ON pin (active LOW) enables the switch; when asserted, the charge pump drives the MOSFET gate with a controlled slew rate, limiting inrush current during hot-plug events. The ISET pin sets the current limit threshold through an external resistor to ground. When load current exceeds the programmed limit for a fixed blanking time, the FPF2700 disconnects the load and initiates an auto-restart sequence after a cool-down period. The Power Good (PGOOD) pin is an open-drain output that asserts when VOUT reaches 90% of VIN. The FLAGB pin indicates fault conditions (overcurrent, UVLO, or overtemperature) as an active-low open-drain signal. Overtemperature shutdown protects the device during sustained overload conditions.

Pin Description: FPF2700MX Pin Definition and Functions
Pin Name Type Description
1 VIN Power Input supply voltage (2.8V to 36V); powers switch and internal circuitry
2 PGOOD Output Power Good open-drain output; asserts when VOUT reaches 90% of VIN
3 ISET Input Current limit set; resistor to GND programs 0.4A-2A current limit
4 ON Input On control; active LOW enables the switch
5 GND Ground Device ground
6 NC – No connect; leave open or connect to GND
7 FLAGB Output Fault flag; active-low open-drain indicates current limit, UVLO, or thermal shutdown
8 VOUT Power Switch output to load
Application Scenarios: In which products and applications is FPF2700MX used
  • Hot-Swap Power Insertion: Controls inrush current when plugging in PCB modules or drives, with slew-rate limiting preventing bus voltage droop on live backplanes
  • Hard Disk Drive Power: Switches and protects HDD power rails with adjustable current limiting matching drive startup surge profiles
  • Motor Drive Protection: Limits motor stall current and provides auto-restart after fault clearing in brushed DC motor applications
  • Telecom Power Distribution: Distributes 12V/24V/36V power rails to line cards with fault isolation and status monitoring via PGOOD and FLAGB
  • Digital Camera Power Control: Sequences power to imaging modules and flash units with controlled turn-on and overcurrent protection
Alternative Models: What chips are recommended as replacements for FPF2700MX
Model Manufacturer Ilimit Vin Key Difference
FPF2701MX onsemi 0.4-2A 2.8-36V Latching fault response (no auto-restart)
FPF2702MX onsemi 0.4-2A 2.8-36V External fault management mode
FPF2700MPX onsemi 0.4-2A 2.8-36V Same function in MLP 3x3mm package
TPS259521LWR TI 0.1-2A 4.5-60V Higher voltage, wider current range
LTC4365CTS8 ADI – 2.5-36V Overvoltage/UV lockout protector (not a switch)

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1