Opens in a new tab

KA5L0380RYDTU

Fairchild Power Switch (FPS), 800V SenseFET, 50kHz, 2.15A peak, TO-220F-4

4500

Effective Inventory

Image for reference only

Manufacturer Part:

KA5L0380RYDTU

Package:

TO-220F-4 (10.4 x 9.3 x 4.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The KA5L0380RYDTU is a Fairchild Power Switch (FPS) that integrates a PWM controller and an 800V SenseFET in a single TO-220F-4 package. Designed for off-line SMPS applications such as LCD monitors, adapters, and industrial power supplies, it operates at a fixed 50kHz switching frequency with comprehensive protection features.

Key Specifications

MOSFET Breakdown Voltage 800V
Oscillator Frequency 50kHz (typical)
Start Threshold Voltage 15V (typical)
Stop Threshold Voltage 9V (typical)
Maximum Duty Cycle 77%
Peak Current Limit 2.15A (typical)
Vcc Operating Range 9V to 30V
Topology Flyback, Forward
Operating Temperature -40°C to +85°C
Package TO-220F-4

Features

  • Integrated PWM controller and 800V avalanche-rugged SenseFET
  • Precision fixed 50kHz operating frequency
  • Pulse-by-pulse current limiting
  • Overvoltage protection (min 25V on Vcc)
  • Overcurrent protection with auto-restart
  • Internal thermal shutdown
  • Undervoltage lockout (UVLO)
  • Soft start function

Applications

  • LCD monitor power supplies
  • SMPS adapters and chargers
  • Industrial auxiliary power supplies
  • Set-top box power supplies
Product Introduction: KA5L0380RYDTU Product Introduction

The KA5L0380RYDTU is a member of the Fairchild KA5X03XX series of Power Switches that combine a pulse width modulation controller and an 800V avalanche-rugged SenseFET into a single TO-220F-4 package. This integration minimizes external component count and simplifies off-line SMPS design. The device operates at a fixed 50kHz switching frequency and features under-voltage lockout (UVLO), over-voltage protection (OVP), over-current protection (OCP), and internal thermal shutdown. The start-up current is typically 100µA, reducing start-up resistor power dissipation. The device enters auto-restart mode during fault conditions, providing robust protection for the power supply and load.

Working Principle: KA5L0380RYDTU Working Principle

The KA5L0380RYDTU uses a current-mode PWM control architecture. The internal oscillator generates a fixed 50kHz clock that sets the switching frequency. The FB pin receives feedback current from an optocoupler on the secondary side, which controls the duty cycle of the integrated SenseFET. The peak drain current is limited on a pulse-by-pulse basis through an internal current sense comparator with a threshold of approximately 200mV. When Vcc drops below the UVLO stop threshold (9V), the device stops switching. When Vcc exceeds the OVP threshold (minimum 25V), the device enters auto-restart mode. Internal thermal shutdown activates when the junction temperature exceeds approximately 160°C, disabling switching until the temperature drops to a safe level.

Pin Description: KA5L0380RYDTU Pin Definition and Functions
Pin Name Type Description
1 GND Ground Ground reference for control circuitry and SenseFET source
2 Vcc Power Supply voltage for control circuits; charged through start-up resistor
3 FB Input Feedback input from optocoupler; controls PWM duty cycle
4 Drain Power High-voltage SenseFET drain; connects to transformer primary
Application Scenarios: In which products and applications is KA5L0380RYDTU used
  • LCD Monitor Power: Provides complete offline flyback converter for LCD displays up to 40W with integrated 800V MOSFET handling universal input voltage range
  • Adapter/Charger SMPS: Powers laptop and mobile device chargers with auto-restart fault protection and soft start for reliable field operation
  • Industrial Auxiliary Supply: Delivers isolated low-voltage rails for sensors and controllers in factory environments with comprehensive OVP and thermal protection
Alternative Models: What chips are recommended as replacements for KA5L0380RYDTU
Model Manufacturer VDS fsw Key Difference
KA5H0380R Fairchild 800V 100kHz Higher frequency variant
KA5M0380R Fairchild 800V 67kHz Medium frequency variant
VIPER22ADIP-E ST 730V 60kHz Lower voltage, DIP-8 package
TOP224P Power Integrations 700V 65kHz Similar topology, different pinout

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1