Opens in a new tab

MP1584EN-LF-Z

3A, 1.5MHz, 28V buck converter, current-mode, programmable fsw, SOIC-8E

50000

Effective Inventory

Image for reference only

Manufacturer Part:

MP1584EN-LF-Z

Package:

SOIC-8E (5.00 x 6.00 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MP1584EN-LF-Z from Monolithic Power Systems (MPS) is a 3A, 1.5MHz, 28V step-down (buck) converter with an integrated high-side power MOSFET. It uses current-mode control for fast loop response and features programmable switching frequency, pulse skipping at light load, internal soft-start, and cycle-by-cycle current limiting. The SOIC8E thermally enhanced package provides excellent heat dissipation.

Key Specifications

Input Voltage Range 4.5V to 28V
Output Voltage Range 0.8V to 20V (adjustable)
Maximum Output Current 3A
Switching Frequency 100kHz to 1.5MHz (programmable)
Quiescent Current 100µA (typical)
Feedback Reference Voltage 0.8V
Efficiency Up to 95%
Operating Temperature -20°C to +85°C
Package SOIC-8E (thermally enhanced)

Features

  • Wide 4.5V to 28V operating input range
  • Programmable switching frequency via external resistor
  • High-efficiency pulse skipping mode at light load
  • Stable with ceramic output capacitors
  • Internal soft-start
  • Internal cycle-by-cycle current limit (no sense resistor)
  • Thermal shutdown with hysteresis
  • Enable pin for on/off control
  • Frequency foldback prevents inductor runaway at startup

Applications

  • Automotive systems
  • Industrial power systems
  • Distributed power architectures
  • Battery-powered systems
  • Networking and telecom equipment
Product Introduction: MP1584EN-LF-Z Product Introduction

The MP1584EN-LF-Z is a high-frequency step-down switching regulator from Monolithic Power Systems with an integrated high-side high-voltage power MOSFET. It delivers up to 3A output current using current-mode control for fast transient response and simple compensation. The wide 4.5V to 28V input range accommodates automotive, industrial, and battery-powered applications. A 100µA quiescent current enables battery-powered designs, while the programmable switching frequency (100kHz to 1.5MHz) allows optimization between efficiency and solution size. At light loads, pulse skipping mode maintains high efficiency. The SOIC8E thermally enhanced package provides excellent thermal performance.

Working Principle: MP1584EN-LF-Z Working Principle

The MP1584EN-LF-Z operates as a current-mode buck converter. The high-side N-channel MOSFET switches ON to connect the input voltage to the inductor through the SW node, storing energy in the inductor. When the MOSFET turns OFF, the external Schottky catch diode conducts, allowing the inductor current to freewheel. The FB pin senses the output voltage through a resistive divider and compares it to the internal 0.8V reference. The error amplifier output (COMP pin) controls the peak inductor current through the current comparator. The FREQ pin sets the switching frequency via an external resistor (Rfreq = 180000/fsw_kHz). The EN pin provides enable/disable control. The BST pin supplies the floating gate driver through a bootstrap capacitor. Internal soft-start ramps the COMP voltage over approximately 2ms. Frequency foldback reduces switching frequency during startup and overcurrent to prevent inductor saturation.

Pin Description: MP1584EN-LF-Z Pin Definition and Functions
Pin Name Type Description
1 SW Power Switching node; connects to inductor and catch diode
2 EN Input Enable input; HIGH = on, LOW = shutdown
3 COMP Analog Compensation node; connect RC network to ground
4 FB Input Feedback voltage input; 0.8V reference
5 GND Ground Device ground and thermal pad
6 FREQ Analog Frequency programming; connect resistor to GND
7 VIN Power Input supply voltage (4.5V to 28V)
8 BST Power Bootstrap capacitor for high-side driver
Application Scenarios: In which products and applications is MP1584EN-LF-Z used
  • Automotive DC-DC Conversion: Converts 12V or 24V vehicle battery to 5V or 3.3V logic rails with 28V max input and 1.5MHz switching enabling compact inductors
  • Industrial Distributed Power: Steps down 24V bus to point-of-load voltages for sensors and controllers with up to 95% efficiency
  • Battery-Powered Devices: Extends runtime with 100µA quiescent current and pulse skipping mode at light loads
Alternative Models: What chips are recommended as replacements for MP1584EN-LF-Z
Model Manufacturer Vin Max Iout Key Difference
MP2338GTL MPS 28V 3A Recommended replacement, synchronous
LM2596S-5.0 TI 40V 3A Fixed 5V output, 150kHz
TPS54331DR TI 28V 3A Synchronous, 570kHz
XL1509-5.0E1 XLSEMI 40V 2A Lower cost, fixed 5V

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1