Opens in a new tab

RT9193-33GB

300mA LDO, fixed 3.3V, 250mV dropout, SOT-23-5, enable pin

50000

Effective Inventory

Image for reference only

Manufacturer Part:

RT9193-33GB

Package:

SOT-23-5 (2.90 x 1.60 x 1.10 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The RT9193-33GB from Richtek is a 300mA low-dropout linear voltage regulator with a fixed 3.3V output in a SOT-23-5 package. With 250mV dropout at 300mA and an enable pin for shutdown control, it provides a compact and cost-effective solution for 3.3V power rails in battery-powered and space-constrained designs.

Key Specifications

Output Voltage 3.3V (fixed)
Output Current 300mA (max)
Dropout Voltage 250mV (typ at 300mA)
Input Voltage 2.5V to 6.0V
Quiescent Current 65uA (typ)
Shutdown Current 0.1uA (typ)
Line Regulation 0.05%/V (typ)
Load Regulation 0.2%/V (typ)
Operating Temperature -40C to +85C
Package SOT-23-5

Features

  • 300mA output current
  • Low dropout: 250mV at 300mA
  • 65uA quiescent current
  • 0.1uA shutdown current
  • Enable pin for power control
  • Short-circuit and thermal protection
  • Stable with ceramic output capacitor
  • SOT-23-5 compact package

Applications

  • 3.3V MCU and sensor power
  • Portable electronics
  • Bluetooth and Wi-Fi modules
  • Battery-powered devices
Product Introduction: RT9193-33GB Product Introduction

The RT9193-33GB from Richtek is a 300mA low-dropout linear regulator providing a fixed 3.3V output in a compact SOT-23-5 package. With only 250mV dropout at full 300mA load, it operates from inputs as low as 3.55V. The low 65uA quiescent current and 0.1uA shutdown current make it excellent for battery-powered applications. The enable pin allows the device to be turned off when not needed. Short-circuit and thermal protection ensure reliability. The device is stable with a small ceramic output capacitor, saving board space. It is a popular choice for 3.3V MCU and wireless module power in IoT and portable designs.

Working Principle: RT9193-33GB Working Principle

The RT9193-33GB uses a P-channel MOSFET pass element in a low-dropout configuration. The error amplifier compares the output voltage (through an internal resistor divider) with a precision bandgap reference and drives the PMOS gate to maintain regulation. The PMOS pass element allows dropout as low as 250mV because the gate can be driven to ground. The enable pin controls the internal bias circuitry; when LOW, the device enters shutdown mode drawing only 0.1uA. Current limiting protects against output shorts, and thermal shutdown disables the pass transistor when junction temperature exceeds approximately 150C. The device requires a 1uF or larger ceramic output capacitor for stability.

Pin Description: RT9193-33GB Pin Definition and Functions
Pin Name Type Description
1 VIN Input Input supply (2.5V to 6.0V)
2 GND Ground Ground
3 EN Input Enable; HIGH = on, LOW = shutdown
4 BYP Analog Bypass capacitor for noise reduction (optional)
5 VOUT Output 3.3V regulated output
Application Scenarios: In which products and applications is RT9193-33GB used
  • IoT 3.3V Power: Provides 3.3V from single Li-ion cell (3.7V) for BLE/Wi-Fi modules and sensors with 250mV dropout and 0.1uA shutdown between transmissions
  • MCU Core Supply: Powers 3.3V MCU from 5V USB with 300mA current headroom for MCU and peripherals with enable pin for power sequencing
  • Portable Sensor Node: Runs from 2x AAA batteries (3V nominal) with 65uA quiescent current maximizing battery life
Alternative Models: What chips are recommended as replacements for RT9193-33GB
Model Manufacturer Vout Iout Key Difference
ME6211C33M5G Microne 3.3V 500mA Higher current, similar package
MIC5205-3.3YM5 Microchip 3.3V 150mA Lower noise, lower current
TLV70033DDCR TI 3.3V 300mA Lower IQ, SOT-23-5
AP2112K-3.3 Diodes Inc 3.3V 600mA Higher current, SOT-23-5

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1