Opens in a new tab

S8550

PNP BJT, -25V, -1.5A, hFE 85-300, 100MHz, TO-92/SOT-23, S8050 complement

200000

Effective Inventory

Image for reference only

Manufacturer Part:

S8550

Package:

TO-92 / SOT-23-3

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The S8550 is a general-purpose PNP bipolar junction transistor (BJT) in a TO-92 or SOT-23 package. With -25V VCEO, -1.5A IC, and 100MHz fT, it is one of the most widely used PNP transistors for low-power switching, amplification, and complementary push-pull circuits paired with the NPN S8050.

Key Specifications

Polarity PNP
VCEO (Collector-Emitter) -25V
VCBO (Collector-Base) -30V
VEBO (Emitter-Base) -5V
IC (Collector Current) -1.5A (max)
Power Dissipation 1W (TO-92)
hFE (DC Gain) 85-300 (classified by suffix)
Transition Frequency 100MHz (typ)
VCE(sat) -0.5V (max at IC=-500mA)
Operating Temperature -55C to +150C
Package TO-92 / SOT-23

Features

  • Complementary pair with S8050 (NPN)
  • High current capability: -1.5A
  • 100MHz transition frequency
  • Three hFE classifications (B, C, D)
  • Low saturation voltage: -0.5V
  • Low cost and wide availability

Applications

  • Low-power switching
  • Audio amplification (push-pull)
  • Motor drive (low power)
  • LED driving
  • General-purpose amplification
Product Introduction: S8550 Product Introduction

The S8550 is a general-purpose PNP bipolar junction transistor commonly available in TO-92 through-hole and SOT-23 surface-mount packages. With a -25V collector-emitter voltage rating, -1.5A continuous collector current, and 100MHz transition frequency, it is suitable for a wide range of low-power switching and amplification applications. The S8550 is the complementary PNP partner to the S8050 NPN transistor, enabling push-pull amplifier and complementary switch designs. Three hFE classification grades (B: 85-160, C: 120-200, D: 160-300) allow designers to select gain matching for specific circuits. The low saturation voltage of -0.5V at 500mA makes it effective as a low-side or high-side switch for LEDs, relays, and small motors.

Working Principle: S8550 Working Principle

The S8550 is a PNP bipolar junction transistor. Current flows from emitter to collector when the base is biased negative relative to the emitter by approximately 0.6-0.7V. A small base current (IB) controls a larger collector current (IC) with the ratio IC/IB = hFE (DC current gain, 85-300 depending on grade). In the active region, the transistor acts as a current amplifier. In saturation, both the base-emitter and base-collector junctions are forward-biased, and VCE drops to the saturation voltage (-0.5V max at 500mA). The 100MHz transition frequency (fT) indicates the frequency at which hFE drops to unity, supporting audio and moderate-frequency applications. As a PNP device, the S8550 sources current from the positive supply through the load, making it ideal for high-side switching and complementary push-pull output stages.

Pin Description: S8550 Pin Definition and Functions
Pin (TO-92) Name Type Description
1 Emitter Power Emitter; connects to positive supply in common-emitter
2 Collector Power Collector; connects to load
3 Base Input Base; drive negative relative to emitter to turn on
Application Scenarios: In which products and applications is S8550 used
  • Push-Pull Audio Amplifier: Pairs with S8050 NPN in Class AB push-pull output stage for small speaker amplifiers with complementary symmetry reducing crossover distortion
  • High-Side Load Switch: Connects emitter to positive supply, collector to load, and base drive through a resistor from MCU GPIO to control LEDs, buzzers, or small motors sourcing up to 1.5A
  • Signal Amplification: Amplifies audio and sensor signals in common-emitter or common-base configurations with hFE up to 300 and 100MHz bandwidth
Alternative Models: What chips are recommended as replacements for S8550
Model Polarity VCEO IC Key Difference
S8050 NPN 25V 1.5A Complementary NPN pair
2N3906 PNP -40V -200mA Lower current, higher voltage
BC557B PNP -45V -100mA Higher voltage, lower current
BD140 PNP -80V -1.5A Higher voltage, TO-126

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1