Opens in a new tab

TLP521-1

1-ch optocoupler, GaAs LED + phototransistor, 5000Vrms, CTR 50-300%, DIP-4

45000

Effective Inventory

Image for reference only

Manufacturer Part:

TLP521-1

Package:

DIP-4 (300mil, 7.62 x 5.08 x 4.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLP521-1 from Toshiba is a single-channel optocoupler consisting of a gallium arsenide infrared LED optically coupled to a silicon phototransistor in a 4-pin DIP package. It provides galvanic isolation of 5000Vrms, making it ideal for signal isolation between high-voltage and low-voltage circuits.

Key Specifications

Channels 1
Isolation Voltage 5000Vrms (min)
CTR (Current Transfer Ratio) 50-300% (at IF=5mA)
LED Forward Voltage 1.15V (typ at IF=20mA)
LED Forward Current 50mA (max)
Collector-Emitter Voltage 55V (max)
Collector Current 50mA (max)
Bandwidth -3dB at approx 50kHz
Rise Time 3us (typ)
Fall Time 3us (typ)
Operating Temperature -55C to +100C
Package DIP-4 (300mil)

Features

  • 5000Vrms isolation voltage
  • CTR: 50-300% (graded by suffix)
  • 4-pin DIP through-hole package
  • Compact creepage and clearance
  • UL 1577 recognized
  • VDE 0884 approved (some grades)

Applications

  • Signal isolation in power supplies
  • Feedback loop in SMPS
  • Industrial control signal coupling
  • Microcontroller I/O isolation
  • Medical equipment isolation
Product Introduction: TLP521-1 Product Introduction

The TLP521-1 from Toshiba is a single-channel optocoupler in a 4-pin DIP package providing 5000Vrms galvanic isolation between input and output. It consists of a gallium arsenide (GaAs) infrared LED optically coupled to a silicon NPN phototransistor. The current transfer ratio (CTR) ranges from 50% to 300% depending on the grade suffix (Y1/Y2/Y3/Y4), allowing designers to select the gain appropriate for their application. The TLP521-1 is one of the most widely used optocouplers for signal isolation in switched-mode power supplies (SMPS) feedback loops, industrial control systems, and medical equipment where safety isolation is mandatory. UL 1577 and VDE 0884 safety approvals are available on qualified grades.

Working Principle: TLP521-1 Working Principle

The TLP521-1 converts electrical signals to light and back to electrical signals for galvanic isolation. On the input side, forward current through the GaAs infrared LED (IF) emits photons at approximately 940nm wavelength. These photons cross the optically transparent insulating barrier (typically silicone or polyimide) and strike the base region of the NPN phototransistor on the output side. The absorbed photons generate base current (photocurrent) which is amplified by the transistor’s hFE to produce collector current (IC). The ratio IC/IF is the Current Transfer Ratio (CTR), typically 50-300% depending on LED current, temperature, and device grade. The 5000Vrms isolation is achieved by the dielectric barrier between LED and phototransistor dies, which provides both electrical isolation and optical coupling simultaneously.

Pin Description: TLP521-1 Pin Definition and Functions
Pin Name Type Description
1 Anode Input LED anode; connect through current-limiting resistor
2 Cathode Input LED cathode; connects to ground or drive low
3 Emitter Output Phototransistor emitter; connects to output ground
4 Collector Output Phototransistor collector; pull up through resistor
Application Scenarios: In which products and applications is TLP521-1 used
  • SMPS Feedback Loop: Provides isolated voltage feedback from secondary output to primary PWM controller with CTR setting loop gain; LED driven by TL431 error amplifier through the optocoupler
  • MCU I/O Isolation: Isolates MCU digital I/O from high-voltage industrial signals (e.g., 24V PLC) with 5000Vrms protecting the MCU from ground loops and transients
  • Medical Equipment Signal Path: Maintains patient isolation with 5000Vrms creepage/clearance meeting IEC 60601 medical safety requirements between patient-connected circuits and control electronics
Alternative Models: What chips are recommended as replacements for TLP521-1
Model Manufacturer Channels CTR Key Difference
PC817C Sharp 1 200-400% Higher CTR grade, DIP-4
TLP521-2 Toshiba 2 50-300% Dual channel, DIP-8
TLP521-4 Toshiba 4 50-300% Quad channel, DIP-16
6N137 Vishay 1 Logic out High-speed (10Mbps) logic output
HCPL-817 Broadcom 1 50-300% Pin-compatible equivalent

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1