Opens in a new tab

ULN2803APG

8-channel Darlington array, 500mA/ch, 50V, integral clamp diodes, DIP-18, TTL compatible

7823

Effective Inventory

Image for reference only

Manufacturer Part:

ULN2803APG

Package:

DIP-18 (through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ULN2803APG is an 8-channel Darlington transistor array from Toshiba, designed for interfacing low-level logic to high-current loads. Each channel consists of a Darlington pair capable of sinking 500mA and withstanding 50V. It includes integral clamp diodes for inductive load suppression, making it ideal for driving relays, solenoids, stepper motors, and lamps directly from TTL or 5V CMOS logic. The PG suffix denotes the DIP-18 package.

Key Specifications

Number of Channels 8
Output Current per Channel 500mA max
Collector-Emitter Voltage 50V max
Input Voltage (ON) 2.4V (TTL compatible)
Output Saturation Voltage 1.1V typical @ 350mA
Clamp Diodes Yes (integral, for inductive loads)
DC Current Gain 1000 min @ 350mA
Package DIP-18 (through-hole)
Operating Temperature -40°C to +85°C

Features

  • 8 Darlington channels in a single package
  • 500mA per channel output current capability
  • 50V output voltage rating
  • Integral suppression diodes for inductive loads
  • TTL/5V CMOS compatible inputs
  • High DC current gain: 1000 minimum
  • Inputs pinned opposite outputs for simplified PCB layout

Applications

  • Relay and solenoid driver arrays
  • Stepper and DC motor drivers
  • Lamp and LED display drivers
  • Logic buffer and line driver
  • Hammer driver in printers
  • Industrial control and automation
Product Introduction: ULN2803APG Product Introduction

The ULN2803APG is an 8-channel Darlington transistor array manufactured by Toshiba, designed for high-current switching applications. Each of the eight channels consists of a Darlington-connected NPN transistor pair with integral suppression diodes. The device can sink up to 500mA per channel at voltages up to 50V. Inputs are compatible with TTL and 5V CMOS logic levels, requiring only 2.4V to turn on. The high current gain (minimum 1000) ensures that logic-level input currents are sufficient to drive high-current loads. The integral clamp diodes protect against back-EMF when switching inductive loads such as relays and solenoids.

Working Principle: ULN2803APG Working Principle

Each ULN2803 channel contains a Darlington pair — two NPN transistors connected so that the emitter current of the first drives the base of the second, multiplying current gain. When a logic-high signal (above 2.4V) is applied to an input pin, the Darlington pair turns on, sinking current through the load connected between the positive supply and the output pin. The output saturates at approximately 1.1V at 350mA load current. Each output pin includes a clamp diode connected to a common COM pin; when the inductive load generates back-EMF during turn-off, the diode provides a current path, dissipating the energy safely. The COM pin should be connected to the load supply voltage for proper diode clamping.

Pin Description: ULN2803APG Pin Definition and Functions
Pin Name Description
1 IN1 Input channel 1 (TTL/CMOS)
2 IN2 Input channel 2
3 IN3 Input channel 3
4 IN4 Input channel 4
5 IN5 Input channel 5
6 IN6 Input channel 6
7 IN7 Input channel 7
8 IN8 Input channel 8
9 GND Common ground
10 COM Common clamp diode connection (tie to load supply)
11-18 OUT8-OUT1 Open-collector outputs (channels 8 to 1)
Application Scenarios: In which products and applications is ULN2803APG used
  • Stepper Motor Driver: Use two ULN2803 channels per winding (4 channels for a unipolar stepper). Connect the motor windings between the supply and output pins. The integral clamp diodes protect against back-EMF during winding commutation. Drive inputs from a microcontroller’s GPIO pins.
  • Relay Bank Driver: Drive up to 8 relays from a single ULN2803. Connect each relay coil between the relay supply and an output pin. The clamp diodes eliminate the need for external flyback diodes. The 500mA per channel rating supports most signal and power relays.
  • LED Matrix Display: Sink current through LED columns or rows in multiplexed displays. The 500mA rating allows driving multiple LEDs per channel. The TTL-compatible inputs connect directly to MCU I/O ports.
Alternative Models: What chips are recommended as replacements for ULN2803APG
Model Channels Current/ch Package Key Difference
ULN2803A 8 500mA DIP-18 Generic equivalent (various mfrs)
ULN2003A 7 500mA DIP-16 7-channel version, more common
ULN2803ADW 8 500mA SOIC-18 Surface-mount version
TPL9202 8 500mA SSOP-20 TI version with thermal shutdown
MC1413B 7 500mA DIP-16 ON Semi 7-ch Darlington

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1