Opens in a new tab

KP3211SGA

PSR LED driver IC, CC+CV, 85-265VAC, ±3% CC, built-in PFC, SOT-23-6, optocoupler-free

3420

Effective Inventory

Image for reference only

Manufacturer Part:

KP3211SGA

Package:

SOT-23-6 (2.9 x 2.8 x 1.1mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The KP3211SGA is a high-precision primary-side regulation (PSR) LED driver IC from Kiwi Instruments, designed for offline LED lighting applications. It supports constant current (CC) and constant voltage (CV) output using primary-side sensing, eliminating the need for an optocoupler and secondary feedback circuitry. With built-in PFC and comprehensive protection features, it enables compact, low-cost LED driver designs in SOT-23-6 package.

Key Specifications

Topology Primary-side regulation (PSR) flyback
Output Mode CC + CV (constant current / constant voltage)
Input Voltage Range 85VAC to 265VAC (universal)
Switching Frequency Up to 100kHz
LED Current Accuracy ±3%
Active PFC Built-in (power factor > 0.9)
Startup Current <10µA
Operating Current 1.5mA (typical)
MOSFET Drive External N-channel MOSFET
Protection OVP, OCP, OTP, SCP, LED open/short
Package SOT-23-6
Operating Temperature -40°C to +105°C

Features

  • Primary-side regulation eliminates optocoupler and secondary feedback
  • CC/CV output for LED driving and battery charging
  • Built-in active PFC for high power factor (> 0.9)
  • ±3% LED current accuracy
  • Ultra-low startup current: <10µA
  • Programmable LED current via external resistor
  • Comprehensive protection: OVP, OCP, OTP, SCP
  • LED open-circuit and short-circuit protection
  • Low EMI design with frequency jittering
  • Meets IEC 61000-3-2 harmonic requirements

Applications

  • LED bulbs and downlights (3W-15W)
  • LED tube lights (T5/T8)
  • LED panel lights and ceiling lamps
  • Battery chargers with CC/CV profile
  • Small-power offline power supplies
  • Smart LED lighting with dimming
Product Introduction: KP3211SGA Product Introduction

The KP3211SGA is a primary-side regulation (PSR) LED driver IC from Kiwi Instruments, designed for offline constant-current LED lighting applications. By sensing the output current through the primary-side flyback waveform, it eliminates the need for an optocoupler and secondary feedback components, reducing BOM cost and improving reliability. The device operates in both constant-current (CC) and constant-voltage (CV) modes, making it suitable for LED driving and battery charging applications. Built-in active PFC achieves power factor greater than 0.9, meeting IEC 61000-3-2 harmonic requirements. The ±3% LED current accuracy ensures consistent brightness across production units. Comprehensive protection features including over-voltage, over-current, over-temperature, and LED open/short protection ensure safe operation under fault conditions.

Working Principle: KP3211SGA Working Principle

The KP3211 uses primary-side regulation to control the flyback converter output without direct secondary-side feedback. During the MOSFET off-time, the magnetizing inductance of the transformer discharges energy to the secondary side. The primary-side auxiliary winding reflects the output voltage; by sampling this voltage at the right moment (when the secondary current reaches zero — discontinuous conduction mode), the IC accurately determines the output voltage. The output current is calculated from the peak primary current (sensed through an external sense resistor) and the discharge time. The CC loop maintains constant average LED current by controlling the peak current and switching frequency. The CV loop takes over when the load is removed, preventing output voltage from rising above the OVP threshold. Active PFC is achieved by shaping the input current to follow the input voltage waveform.

Pin Description: KP3211SGA Pin Definition and Functions
Pin Name Description
1 CS Current sense input (connect to source resistor)
2 GND Ground
3 GATE Gate drive output (to external N-FET)
4 VDD IC power supply (decouple with capacitor)
5 FB Feedback input from auxiliary winding
6 NC No connect
Application Scenarios: In which products and applications is KP3211SGA used
  • LED Bulb Driver (7W): Design a compact 7W LED bulb driver using the KP3211 in a boundary-conduction-mode flyback. The primary-side regulation eliminates the optocoupler, reducing component count and board area to fit within the bulb base. The built-in PFC ensures compliance with energy regulations. Set LED current via the CS pin sense resistor.
  • LED Tube Light (T8, 18W): Use the KP3211 for a high-PF T8 tube driver. The CV mode provides safe output limiting during open-load conditions (when the tube is removed). The LED short-circuit protection prevents thermal runaway if individual LEDs fail short. The frequency jittering feature reduces EMI filter requirements.
  • Battery Charger (CC/CV): Leverage the dual CC/CV mode for lithium-ion battery charging. The CC mode charges the battery at a constant rate until it reaches the voltage threshold, then the CV mode maintains the voltage as current tapers. The OVP feature prevents overcharging if the battery is disconnected during the CV phase.
Alternative Models: What chips are recommended as replacements for KP3211SGA
Model Topology PFC CC Accuracy Key Difference
BP3122 PSR No ±5% Lower cost, no PFC
SY50283 PSR Built-in ±3% Silergy, similar features
OB2538 PSR No ±5% OnBright, basic PSR
CR6842T PSR+SSR No ±2% ChipRail, higher accuracy

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1