Opens in a new tab

TLC6C598QPWRQ1

AEC-Q100 8-bit shift register LED driver, 40V/50mA DMOS, 3-5.5V, thermal shutdown, TSSOP-16

2067

Effective Inventory

Image for reference only

Manufacturer Part:

TLC6C598QPWRQ1

Package:

TSSOP-16 (5.0 x 4.4 x 1.2mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLC6C598QPWRQ1 is an AEC-Q100 qualified 8-bit shift register LED driver from Texas Instruments with 8 open-drain DMOS outputs rated for 40V and 50mA continuous sink current. Operating from 3V to 5.5V logic supply with independent 40V output supply, it features separate shift and storage register clocks, thermal shutdown protection, and enhanced cascading via SER_OUT. The TSSOP-16 package suits automotive instrument clusters and indicator LED driving.

Key Specifications

Channels 8 (open-drain DMOS outputs)
Logic Supply (VCC) 3V to 5.5V
Output Voltage Rating 40V maximum
Output Current (continuous) 50mA per channel (VCC = 5V)
Output Current (PWM) 200mA peak (t<1ms, avg<50mA)
On-Resistance (RDS-ON) 6-14Ω typical (VCC=5V, 25°C)
Max Clock Frequency 10 MHz
Supply Current 130µA typical (static)
Shutdown Current 0.15µA typical
ESD Protection 2000V HBM, 200V MM
Thermal Shutdown 175°C (built-in)
Package TSSOP-16 (5.0 x 4.4mm)
Operating Temperature -40°C to +125°C
Qualification AEC-Q100 Grade 1

Features

  • AEC-Q100 Grade 1 qualified for automotive applications
  • 8 open-drain DMOS outputs, 40V/50mA per channel
  • 3V to 5.5V logic supply, separate LED supply up to 40V
  • Separate shift register (SRCK) and storage register (RCK) clocks
  • Output enable (G) for PWM dimming control
  • Clear (CLR) pin resets all registers
  • Enhanced cascading via SER_OUT with improved hold time
  • Built-in thermal shutdown protection at 175°C
  • Slow output transition times reduce EMI
  • Current derating with temperature for self-protection

Applications

  • Automotive instrument cluster LED indicators
  • Tell-tale lamp drivers (warning lights)
  • 7-segment display LED driving
  • Elevator display panels
  • PLC function indicators
  • Home appliance display panels
Product Introduction: TLC6C598QPWRQ1 Product Introduction

The TLC6C598QPWRQ1 is an AEC-Q100 Grade 1 qualified 8-bit shift register LED driver from Texas Instruments, designed for automotive and industrial LED driving applications. It features 8 open-drain DMOS transistor outputs rated at 40V and 50mA continuous sink current, with 200mA PWM peak capability. The device contains an 8-bit serial-in, parallel-out shift register feeding an 8-bit D-type storage register with separate clocks (SRCK and RCK). The output enable (G) pin supports PWM dimming, while the CLR pin clears all registers simultaneously. Enhanced cascading via SER_OUT provides extra hold time for multi-device chains. Built-in thermal shutdown at 175°C and current derating with temperature protect the device. The slow output transition times (tr/tf ~210ns/128ns) significantly reduce EMI compared to standard logic outputs.

Working Principle: TLC6C598QPWRQ1 Working Principle

The TLC6C598 operates as a serial-to-parallel LED driver. Data is clocked into the 8-bit shift register on the rising edge of SRCK. After 8 bits are loaded, the RCK rising edge transfers the shift register data to the 8-bit storage register. When G is low (output enabled) and CLR is high, the storage register data drives the DMOS output transistors — a ‘1’ turns the output ON (sinking current to GND through the LED), a ‘0’ turns it OFF. The open-drain DMOS outputs can drive LEDs connected to a separate supply voltage up to 40V, independent of the 3-5.5V logic supply. PWM dimming is achieved by toggling the G pin at the desired duty cycle. For cascading multiple devices, SER_OUT provides the shift register output on the falling edge of SRCK, ensuring adequate hold time for the next device’s SER_IN. The thermal shutdown disables all outputs when the junction temperature exceeds 175°C, and output current naturally decreases at higher temperatures for additional self-protection.

Pin Description: TLC6C598QPWRQ1 Pin Definition and Functions
Pin Name Description
1 G Output enable (active low; high = all outputs off)
2 CLR Register clear (active low; clears shift and storage registers)
3 SRCK Shift register clock (rising edge shifts data)
4 RCK Storage register clock (rising edge latches data)
5-8,11-14 DR0-DR7 Open-drain DMOS outputs (8 channels)
9 SER_OUT Serial data output for cascading
10 GND Ground
15 SER_IN Serial data input
16 VCC Logic supply (3V to 5.5V)
Application Scenarios: In which products and applications is TLC6C598QPWRQ1 used
  • Automotive Tell-Tale Indicators: Drive 8 warning/tell-tale LEDs (check engine, oil pressure, battery, etc.) in an instrument cluster. The MCU sends 8 bits of LED state via SPI-like serial interface (SER_IN, SRCK, RCK). The G pin controls PWM dimming for night-time brightness adjustment. The AEC-Q100 qualification ensures reliable operation in the automotive under-dash environment.
  • 7-Segment Display Multiplexing: Use two TLC6C598 devices cascaded — one for segment drives (a-g + DP) and one for digit enables. The 50mA per-channel current is sufficient for bright automotive displays. The slow output transitions reduce EMI that could interfere with sensitive RF receivers in the vehicle.
  • Industrial PLC Status Panel: Drive 8 status indicator LEDs on a PLC front panel. The 40V output rating allows driving 12V or 24V industrial LEDs directly. Cascading multiple TLC6C598 devices creates a 16-, 24-, or 32-LED indicator panel using only 3 MCU pins (SER_IN, SRCK, RCK) plus G for global enable.
Alternative Models: What chips are recommended as replacements for TLC6C598QPWRQ1
Model Channels Current Key Difference
TLC6C5912QPWRQ1 12 50mA 12-bit version, more channels
TLC6C598PWR 8 50mA Non-automotive, -40~105°C
TPIC6B595 8 150mA TI, higher current, power logic
STPIC6D595 8 70mA ST, automotive shift register driver

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1