Opens in a new tab

TPS61022RWUR

8A sync boost, 0.5-5.5V in, 2.2-5.5V out, 94.7% eff, true disconnect, pass-through, 2x2mm VQFN-7

3262

Effective Inventory

Image for reference only

Manufacturer Part:

TPS61022RWUR

Package:

VQFN-HR-7 (2.0 x 2.0 x 0.6mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS61022RWUR is an 8A synchronous boost converter from Texas Instruments with ultra-low 0.5V input voltage capability, designed for supercapacitor backup and battery-powered IoT applications. With integrated 12mΩ/18mΩ MOSFETs, 94.7% efficiency at 3.6V→5V/3A, selectable PFM/PWM mode, true load disconnect, and pass-through mode, it delivers high power in a tiny 2x2mm VQFN-7 package.

Key Specifications

Topology Synchronous Boost
Input Voltage Range 0.5V to 5.5V (startup from 1.8V)
Output Voltage Range 2.2V to 5.5V (adjustable)
Switch Current Limit 8A valley (6.5A min over temperature)
Integrated MOSFETs LS: 12mΩ, HS: 18mΩ
Efficiency 94.7% (3.6V→5V, 3A)
Switching Frequency 1MHz (VIN>1.5V); 0.6MHz (VIN<1V)
Quiescent Current 26µA (VOUT, auto PFM)
Shutdown Current 0.5µA (VIN), 3µA (VOUT)
Reference Voltage Accuracy ±2.5% over -40°C to +125°C
Max Duty Cycle 97%
Pass-Through Mode Yes (VIN > VOUT)
Load Disconnect True disconnect during shutdown
Output OVP 5.7V
MODE Pin Auto PFM (low) or Forced PWM (high)
Package VQFN-HR-7 (2.0 x 2.0mm)
Operating Temperature -40°C to +125°C (junction)

Features

  • 0.5V ultra-low input voltage operation
  • 8A valley switch current limit with 12mΩ/18mΩ FETs
  • 94.7% peak efficiency
  • True load disconnect during shutdown
  • Pass-through mode when VIN > VOUT
  • Auto PFM or forced PWM selectable via MODE pin
  • 26µA quiescent current in auto PFM
  • 5.7V output overvoltage protection
  • Output short-circuit protection
  • Thermal shutdown protection
  • 2mm x 2mm VQFN-7 package

Applications

  • Supercapacitor backup power
  • USB power bank / portable chargers
  • IoT and battery-powered devices
  • GPRS/GSM module power
  • Single-cell Li-ion/LiFePO4 boost
  • Low-voltage energy harvesting
Product Introduction: TPS61022RWUR Product Introduction

The TPS61022RWUR is a high-power synchronous boost converter from Texas Instruments with an ultra-low 0.5V minimum input voltage, making it uniquely suited for supercapacitor backup applications where the energy source may be deeply discharged. It integrates 12mΩ (low-side) and 18mΩ (high-side) MOSFETs for 94.7% efficiency at 3.6V-to-5V/3A conversion. The 8A valley current limit supports high output power from low-voltage sources. A MODE pin selects between auto PFM mode (26µA IQ for light-load efficiency) and forced PWM mode (for predictable noise spectrum). The device features true load disconnect during shutdown (no body diode path from output to input), pass-through mode when VIN exceeds VOUT, 5.7V output overvoltage protection, and output short-circuit protection — all in a tiny 2x2mm VQFN-7 package.

Working Principle: TPS61022RWUR Working Principle

The TPS61022 uses a synchronous boost (step-up) topology with current-mode control. During each switching cycle, the low-side MOSFET turns on, building current in the external inductor. When the inductor current reaches the valley current limit threshold, the low-side FET turns off and the high-side FET turns on, transferring the inductor energy to the output. The switching frequency is nominally 1MHz when VIN > 1.5V and decreases to 0.6MHz as VIN drops below 1V, maintaining manageable on-times at low input voltages. In auto PFM mode, the device skips pulses at light load to maintain regulation with minimal switching losses (26µA IQ). In forced PWM mode, the device switches continuously regardless of load. When VIN rises above VOUT, the pass-through mode turns on the high-side FET continuously, connecting VIN to VOUT through the inductor with very low voltage drop — useful when a primary supply is available. True disconnect is achieved because the high-side MOSFET has no body diode path from VOUT to VIN when the device is shut down.

Pin Description: TPS61022RWUR Pin Definition and Functions
Pin Name Description
1 GND Ground
2 SW Switch node (connect to inductor)
3 VOUT Output voltage (2.2V-5.5V)
4 FB Feedback voltage (adjust output via divider)
5 EN Enable (high = enabled, low = shutdown)
6 MODE Mode select (high = FPWM, low = auto PFM)
7 VIN Input supply (0.5V to 5.5V)
Application Scenarios: In which products and applications is TPS61022RWUR used
  • Supercapacitor Backup Power: Use a 2.7V supercapacitor as backup for a 3.3V or 5V system rail. When the main supply fails, the TPS61022 boosts the supercap voltage from 2.7V down to 0.5V, extracting maximum stored energy. The 0.5V minimum input allows the supercap to discharge to near-zero, extending backup time. Set MODE low (auto PFM) to minimize IQ during normal operation when the main supply is present and the TPS61022 is not switching.
  • USB Power Bank (5V/2A): Boost a single Li-ion cell (3.0V-4.2V) to 5V/2A for USB output. The 8A current limit supports 2A output even at 3.0V input. True disconnect prevents battery drain when the USB load is removed. The 94.7% efficiency minimizes heat in the compact enclosure.
  • GPRS Module Power: Supply a GPRS module that draws 2A bursts during transmission. The TPS61022 boosts a single LiFePO4 cell (3.2V) to 4.0V with 8A current limit, handling the 2A transmit bursts with margin. Forced PWM mode ensures a clean output voltage without PFM ripple during the critical transmit windows.
Alternative Models: What chips are recommended as replacements for TPS61022RWUR
Model Vin Min Isw Key Difference
TPS61023 0.5V 4A Lower current, smaller solution
TPS61088 1.8V 13A Higher current, higher Vin min
MP3426 1.8V 8A MPS, similar current, higher Vin min
SY7065 0.6V 6.5A Silergy, similar Vin, lower current

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1