Opens in a new tab

TLV62569PDRLR

2A sync buck, 2.5-5.5V in, 0.6-5.5V out, DCS-Control, 15µA IQ, 1.5/2.5MHz, 100% duty, SOT-563-6

8911

Effective Inventory

Image for reference only

Manufacturer Part:

TLV62569PDRLR

Package:

SOT-563-6 (1.6 x 1.2 x 0.6mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLV62569PDRLR is a 2A high-efficiency synchronous buck converter from Texas Instruments with 2.5V to 5.5V input and 0.6V to 5.5V adjustable output. Using DCS-Control topology, it achieves 95% efficiency with 15µA quiescent current and 1.5MHz/2.5MHz selectable switching frequency. The 100% duty cycle mode and 1.5MHz/2.5MHz options make it ideal for battery-powered and compact point-of-load applications in a tiny SOT-563-6 package.

Key Specifications

Topology Synchronous Buck (DCS-Control)
Input Voltage 2.5V to 5.5V
Output Voltage 0.6V to 5.5V (adjustable)
Output Current 2A maximum
Switching Frequency 1.5MHz or 2.5MHz (pin selectable)
Quiescent Current 15µA (typical)
Shutdown Current 0.5µA (typical)
Efficiency Up to 95%
Reference Voltage 0.6V (±1.5%)
Duty Cycle Up to 100%
Mode Pin Selects 1.5MHz (high) or 2.5MHz (low)
Soft Start Internal (1ms typical)
Power Good Yes (open-drain)
Package SOT-563-6 (1.6 x 1.2mm)
Operating Temperature -40°C to +125°C

Features

  • 2.5V to 5.5V input, 0.6V to 5.5V adjustable output
  • 2A output current with integrated synchronous FETs
  • DCS-Control for fast transient response
  • 1.5MHz or 2.5MHz switching frequency selectable
  • 15µA typical quiescent current
  • 0.5µA shutdown current
  • 100% duty cycle mode for low dropout
  • Power good output for sequencing
  • Internal soft start
  • Output overvoltage and short-circuit protection
  • Tiny SOT-563-6 (1.6 x 1.2mm) package

Applications

  • Single-cell Li-ion to 1.2V/1.8V/3.3V rails
  • Portable device point-of-load power
  • USB-powered devices
  • Wearable electronics
  • IoT sensor node power
  • SSD and storage device power
Product Introduction: TLV62569PDRLR Product Introduction

The TLV62569PDRLR is a 2A high-efficiency synchronous buck converter from Texas Instruments designed for single-cell Li-ion and 3.3V/5V bus-powered applications. It uses DCS-Control topology for fast transient response and seamless PWM/power-save mode transitions. The input range is 2.5V to 5.5V and the output is adjustable from 0.6V to 5.5V via an external resistor divider. A MODE pin selects between 1.5MHz and 2.5MHz switching frequency, allowing the designer to trade off inductor size versus efficiency. The 15µA quiescent current and 0.5µA shutdown current maximize battery life in always-on portable devices. The 100% duty cycle mode maintains output regulation when VIN approaches VOUT, useful during battery discharge. The tiny SOT-563-6 package (1.6 x 1.2mm) minimizes board area in space-constrained wearables and IoT devices.

Working Principle: TLV62569PDRLR Working Principle

The TLV62569 uses DCS-Control (Direct Control with Seamless transition), a proprietary topology combining voltage-mode and current-mode regulation. In PWM mode, the device switches at the selected frequency (1.5MHz or 2.5MHz) with synchronous rectification for high efficiency. When the load drops below the power-save threshold, the device seamlessly enters PFM mode, skipping switching cycles to maintain regulation with minimal switching losses and 15µA IQ. The 100% duty cycle mode turns the high-side FET on continuously when VIN drops close to VOUT, functioning as a low-dropout pass switch. The power good comparator monitors the FB voltage and de-asserts PG when the output drops below the regulation target. The internal soft start (1ms) limits inrush current during startup.

Pin Description: TLV62569PDRLR Pin Definition and Functions
Pin Name Description
1 GND Ground
2 SW Switch node (connect to inductor)
3 VIN Input supply (2.5V to 5.5V)
4 EN Enable (high = enabled; internal pull-up)
5 FB Feedback (connect to output divider)
6 MODE Frequency select (high = 1.5MHz, low = 2.5MHz)
Application Scenarios: In which products and applications is TLV62569PDRLR used
  • Li-ion to 1.8V FPGA I/O Rail: Convert a 3.7V Li-ion battery to 1.8V at 2A for an FPGA I/O bank. Select 2.5MHz (MODE low) to use a tiny 0.47µH inductor, minimizing solution size. The 15µA IQ preserves battery life when the FPGA enters sleep mode. The PG output signals the FPGA when the 1.8V rail is stable during power-up sequencing.
  • 5V USB to 3.3V: Regulate 5V USB power down to 3.3V at 2A for a portable instrument. The 100% duty cycle mode maintains 3.3V output even if the USB voltage drops to 3.4V due to cable resistance. Select 1.5MHz (MODE high) for maximum efficiency. The 0.5µA shutdown current allows the MCU to disable the converter during deep sleep.
  • Wearable 3.3V to 1.2V: Generate a 1.2V core rail from a 3.3V system rail in a smartwatch. The 2.5MHz mode uses a 0.33µH inductor that fits within the watch’s height constraint. The 95% efficiency minimizes heat and extends battery life. The 1.6 x 1.2mm SOT-563 package occupies minimal board area.
Alternative Models: What chips are recommended as replacements for TLV62569PDRLR
Model Iout Vin Key Difference
TLV62568PDRLR 2A 2.5-5.5V No PG output, lower cost
TPS62088 3A 2.4-5.5V Higher current, DCS-Control
MP2143 2A 2.5-6V MPS, similar specs, COT control
SY8089 2A 2.5-5.5V Silergy, similar, 1.5MHz fixed

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1