Opens in a new tab

LM1085IT-5.0

3A LDO linear regulator, 5.0V fixed output, 1.3V dropout, TO-220-3, pin-compatible with LM317

4380

Effective Inventory

Image for reference only

Manufacturer Part:

LM1085IT-5.0

Package:

TO-220-3

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM1085IT-5.0 is a 3A low-dropout positive voltage regulator from Texas Instruments providing a fixed 5.0V output. With a maximum dropout voltage of 1.5V at 3A, it is pin-compatible with the industry-standard LM317 and housed in a TO-220-3 through-hole package. Ideal for high-efficiency linear regulation, battery charging, and post-regulation applications.

Key Specifications

  • Output Voltage: 5.0V (Fixed, ±4% accuracy)
  • Output Current: 3A (minimum current limit 3.2A)
  • Input Voltage Range: 2.6V ~ 29V
  • Dropout Voltage: 1.3V typical, 1.5V max at 3A
  • Quiescent Current: 5 mA typical
  • Line Regulation: 0.015% typical
  • Load Regulation: 0.1% typical
  • Output Noise: 38 µVrms
  • PSRR: 30 dB at 100 kHz
  • Thermal Resistance θ_JA: 23°C/W (TO-220)
  • Minimum Output Capacitor: 10 µF (non-ceramic)
  • Operating Temperature: -40°C ~ 125°C (junction)
  • Package: TO-220-3 (NDE), 3 pins, Through Hole

Features

  • 3A output current capability
  • Low 1.3V typical dropout at full load
  • Internal current limiting and thermal shutdown
  • Pin-compatible with LM317
  • Available in 3.3V, 5.0V, 12V fixed and adjustable versions
  • Output voltage accuracy: ±4%

Applications

  • High-efficiency linear regulators
  • Battery chargers
  • Switching power supply post-regulation
  • Constant current regulators
  • Microprocessor power supplies
Product Introduction: LM1085IT-5.0 Product Introduction

The LM1085IT-5.0 is a low-dropout positive voltage regulator from Texas Instruments capable of delivering 3A output current with a maximum dropout voltage of 1.5V. The device features a fixed 5.0V output with ±4% accuracy, making it ideal for applications requiring a stable 5V rail from a higher voltage source. The internal current limiting and thermal shutdown protection ensure reliable operation under fault conditions. The pinout is compatible with the industry-standard LM317, allowing easy upgrade paths in existing designs. The IT suffix indicates industrial temperature range and tube packaging.

Working Principle: LM1085IT-5.0 Working Principle

The LM1085IT-5.0 uses a PNP pass transistor in a common-emitter configuration to achieve low dropout voltage. Unlike traditional NPN-based regulators where dropout voltage is at least 2V (V_BE + V_SAT), the PNP architecture reduces dropout to the saturation voltage of the pass transistor (1.3V typical at 3A). The internal bandgap reference provides a stable voltage reference trimmed by Zener zap during manufacturing to set the fixed 5.0V output. The error amplifier compares a fraction of the output voltage with the reference and drives the pass transistor to maintain regulation. Current limiting is achieved by sensing the voltage drop across an internal sense resistor, while thermal shutdown activates at approximately 165°C junction temperature.

Pin Description: LM1085IT-5.0 Pin Definition and Functions
Pin Name Function
1 ADJ/GND Adjust pin (grounded for fixed output versions)
2 VOUT Regulated 5.0V output
3 VIN Unregulated input voltage (2.6V to 29V)
Application Scenarios: In which products and applications is LM1085IT-5.0 used

The LM1085IT-5.0 is commonly used as a 5V post-regulator following a switching power supply, where its low dropout voltage allows efficient operation even when the input voltage is only slightly above 5V. In battery charging applications, the 3A output capability and current limiting make it suitable for charging multi-cell battery packs. As a microprocessor supply, the low output noise (38 µVrms) and good PSRR (30 dB at 100 kHz) ensure clean power delivery to noise-sensitive digital circuits. The thermal shutdown protection is critical in enclosed applications where heatsink options are limited.

Alternative Models: What chips are recommended as replacements for LM1085IT-5.0
Model Manufacturer Key Difference
LM1084IT-5.0 Texas Instruments 5A output current version
LM1086IT-5.0 Texas Instruments 1.5A output current version
LT1085CT-5 Analog Devices Pin-compatible alternative

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1