Opens in a new tab

TSV612AIDT

Dual CMOS RRIO op-amp, 120kHz GBW, 10µA/amplifier, 1pA Ibias, 1.5-5.5V, SO-8

4900

Effective Inventory

Image for reference only

Manufacturer Part:

TSV612AIDT

Package:

SOIC-8 (4.9 x 3.9 x 1.65 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TSV612AIDT from STMicroelectronics is a dual CMOS operational amplifier with rail-to-rail input and output, 120 kHz gain-bandwidth product, and ultra-low 10 µA supply current per amplifier. Operating from 1.5V to 5.5V, it features 1 pA input bias current and 800 µV max offset voltage in an SO-8 package.

Key Specifications

  • Channels: 2 (dual)
  • Supply Voltage: 1.5V ~ 5.5V
  • Gain-Bandwidth Product: 120 kHz
  • Slew Rate: 40 V/ms
  • Supply Current: 10 µA/amplifier typical at 5V
  • Input Offset Voltage: 800 µV max (A version)
  • Input Bias Current: 1 pA typical
  • CMRR: 71 dB
  • PSRR: 62 dB
  • Voltage Noise: 105 nV/√Hz at 1 kHz
  • Output Current: 58 mA
  • Phase Margin: 58° (CL=100pF)
  • Operating Temperature: -40°C ~ +85°C
  • Package: SO-8

Features

  • Rail-to-rail input and output for maximum dynamic range
  • Ultra-low 10 µA supply current per amplifier
  • Very low 1 pA input bias current (CMOS input)
  • Unity-gain stable
  • Operates from 1.5V single supply
  • ESD protection: 4 kV HBM

Applications

  • Battery-powered sensor signal conditioning
  • Smoke detectors and environmental sensors
  • Portable medical instruments
  • Active filters for low-frequency signals
  • Transimpedance amplifiers for photodiodes
Product Introduction: TSV612AIDT Product Introduction

The TSV612AIDT from STMicroelectronics is a dual CMOS operational amplifier that combines rail-to-rail input/output capability with ultra-low power consumption of 10 µA per amplifier. The CMOS input stage provides picoampere input bias current, making it ideal for interfacing with high-impedance sensors such as photodiodes, pH probes, and piezoelectric transducers. The 120 kHz gain-bandwidth product and 40 V/ms slew rate are sufficient for low-frequency signal conditioning, active filtering, and transimpedance amplifier applications. The device operates from a single 1.5V to 5.5V supply, covering the full range of common battery voltages from single-cell alkaline to lithium-ion.

Working Principle: TSV612AIDT Working Principle

The TSV612AIDT uses a CMOS input stage with back-gate biasing to achieve rail-to-rail common-mode input range. Two complementary differential pairs (PMOS for low common-mode voltages, NMOS for high) operate in parallel, with a smooth transition between them near mid-supply. The rail-to-rail output stage uses a common-source configuration that can swing to within millivolts of each supply rail under light load. The 10 µA total supply current per amplifier is achieved through careful bias current optimization, making the device suitable for always-on battery-powered applications. The internal compensation ensures unity-gain stability with any capacitive load up to 100 pF.

Pin Description: TSV612AIDT Pin Definition and Functions
Pin Name Function
1 OUT A Amplifier A output
2 -IN A Amplifier A inverting input
3 +IN A Amplifier A non-inverting input
4 VCC- Negative supply / Ground
5 +IN B Amplifier B non-inverting input
6 -IN B Amplifier B inverting input
7 OUT B Amplifier B output
8 VCC+ Positive supply (1.5-5.5V)
Application Scenarios: In which products and applications is TSV612AIDT used

The TSV612AIDT is ideal for battery-powered sensor interfaces where the 10 µA supply current extends operating life. In smoke detectors, the dual amplifiers provide signal amplification and threshold comparison. For portable medical devices, the picoampere input bias current prevents loading of high-impedance biopotential electrodes. As a transimpedance amplifier for photodiodes, the low input bias current minimizes DC offset errors. The dual configuration enables complete signal chains (amplifier + filter) in a single IC for space-constrained wearable applications.

Alternative Models: What chips are recommended as replacements for TSV612AIDT
Model Manufacturer Key Difference
MCP6002-I/SN Microchip 1MHz GBW, 100µA, SO-8
TSV6192IDT STMicroelectronics 450kHz GBW, 10µA, higher speed
OPA2330AIDR Texas Instruments Zero-drift, 350kHz, 21µA

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1