Opens in a new tab

STPS1L30A

Schottky rectifier, 30V, 1A, 260mV VF@1A, SMA (DO-214AC), avalanche rated

10800

Effective Inventory

Image for reference only

Manufacturer Part:

STPS1L30A

Package:

SMA (DO-214AC)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STPS1L30A from STMicroelectronics is a 30V, 1A low forward voltage drop Schottky rectifier in an SMA (DO-214AC) surface-mount package. With a typical forward voltage of just 260 mV at 1A (125°C), it is designed for high-frequency miniature switched-mode power supplies and synchronous rectification applications.

Key Specifications

  • VRRM: 30V
  • IF(AV): 1A (square wave, δ=0.5)
  • IF(RMS): 10A
  • IFSM: 75A (tp=10ms, sinusoidal)
  • VF: 260 mV typ @ IF=1A, Tj=125°C
  • VF: 395 mV max @ IF=1A, Tj=25°C
  • IR: 200 µA max @ VR=VRRM, Tj=25°C
  • IR: 15 mA max @ VR=VRRM, Tj=100°C
  • PARM: 110W (tp=10µs, Tj=125°C)
  • Rth(j-l): 30°C/W (junction to lead)
  • Tj: -65°C ~ +150°C
  • Package: SMA (DO-214AC)

Features

  • Very low forward voltage drop reduces conduction losses
  • Avalanche rated for robustness in inductive circuits
  • Optimized for parallel operation with MOSFETs in synchronous rectification
  • Miniature surface-mount SMA package
  • ECOPACK2 compliant (RoHS)

Applications

  • DC-DC converter output rectification
  • Synchronous rectification bypass diode
  • Battery charger circuits
  • Telecom power supply rectification
  • Cordless appliance power management
Product Introduction: STPS1L30A Product Introduction

The STPS1L30A from STMicroelectronics is a low forward voltage drop Schottky rectifier specifically designed for high-frequency miniature switched-mode power supplies. The 30V reverse voltage rating and 1A average forward current make it ideal for 3.3V and 5V output DC-DC converter rectification stages. The extremely low 260 mV forward voltage at 1A (125°C) significantly reduces conduction losses compared to standard Schottky diodes, improving overall converter efficiency. The device is also optimized for use in parallel with MOSFETs in synchronous rectification circuits, where it conducts during the MOSFET dead time. The SMA (DO-214AC) surface-mount package provides low thermal resistance and is compatible with standard pick-and-place assembly.

Working Principle: STPS1L30A Working Principle

The STPS1L30A uses a metal-semiconductor (Schottky) junction formed by the contact between a metal (typically chromium or titanium-tungsten) and lightly doped N-type silicon. Unlike a PN junction diode, the Schottky junction operates with majority carrier conduction only — electrons cross the barrier from the semiconductor into the metal under forward bias. The absence of minority carrier storage eliminates reverse recovery charge, enabling very fast switching without the recovery losses associated with PN junction diodes. The low barrier height of the metal-semiconductor junction results in the characteristically low forward voltage drop (260 mV typ at 1A, 125°C). The trade-off is higher reverse leakage current compared to PN diodes, which increases with temperature and must be considered in thermal design.

Pin Description: STPS1L30A Pin Definition and Functions
Pin Name Function
1 Cathode Negative terminal (marked with band on package)
2 Anode Positive terminal
Application Scenarios: In which products and applications is STPS1L30A used

The STPS1L30A is primarily used as the output rectifier in low-voltage DC-DC converters where its 260 mV forward drop minimizes conduction losses in the output stage. In synchronous buck converters, it serves as the bypass diode that conducts during the dead time between the high-side and low-side MOSFET transitions, preventing body diode conduction in the low-side MOSFET. For battery charger circuits, the low forward drop reduces power dissipation and heat generation. In telecom power supplies, the avalanche rating provides protection against voltage spikes from inductive loads. The SMA package is widely used in compact power supply designs where board space is limited.

Alternative Models: What chips are recommended as replacements for STPS1L30A
Model Manufacturer Key Difference
SS13 Multiple 30V, 1A, SMA, generic alternative
STPS1L30U STMicroelectronics SMB package, higher surge rating
MBR130LSFT1G onsemi 30V, 1A, SOD-123FL, smaller

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1