Opens in a new tab

L6920DTR

Synchronous boost DC-DC, 0.6-5.5Vin, 3.3V/5V/adj out, 120mΩ switches, 1A limit, TSSOP-8

2800

Effective Inventory

Image for reference only

Manufacturer Part:

L6920DTR

Package:

TSSOP-8

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The L6920DTR from STMicroelectronics is a high-efficiency synchronous step-up (boost) DC-DC converter that operates from input voltages as low as 0.6V with guaranteed startup at 1V. It integrates a 120 mΩ N-channel switch and 120 mΩ P-channel synchronous rectifier, requiring only three external components to deliver fixed 3.3V or 5V output, or adjustable output from 2V to 5.2V.

Key Specifications

  • Input Voltage: 0.6V ~ 5.5V (operating), 1V (startup)
  • Output Voltage: 3.3V / 5V fixed or 2V ~ 5.2V adjustable
  • Switch RDS(on): 120 mΩ (N-ch active switch)
  • Synchronous Rectifier: 120 mΩ (P-ch, integrated)
  • Current Limit: 0.8A ~ 1.2A (typ 1A)
  • Quiescent Current: 9 µA typ (Vout=3.3V)
  • Shutdown Current: 0.1 µA typ
  • Switching: Variable frequency PFM control
  • Maximum On Time: 5 µs typ
  • Minimum Off Time: 1 µs typ
  • Reference Voltage: 1.23V
  • Low Battery Detector: Yes (1.23V threshold)
  • Reverse Battery Protection: Yes
  • Operating Temperature: -40°C ~ 85°C
  • Package: TSSOP-8

Features

  • Startup at 1V from a single battery cell
  • Internal synchronous rectifier eliminates external Schottky diode
  • Zero shutdown current (0.1 µA)
  • Fixed 3.3V/5V or adjustable output with 2 external resistors
  • Low battery voltage detection with open-drain output
  • Reverse battery protection
  • Only 3 external components required
  • Variable frequency PFM for high efficiency at light load

Applications

  • Single-cell to 3-cell battery powered devices
  • PDA and handheld instruments
  • Cellular and cordless phones
  • GPS receivers
  • Digital cameras
Product Introduction: L6920DTR Product Introduction

The L6920DTR from STMicroelectronics is a monolithic synchronous step-up converter designed for battery-powered applications where high efficiency and minimal component count are essential. The device integrates both the N-channel active switch and P-channel synchronous rectifier, eliminating the need for an external Schottky diode and reducing component count to just three: an inductor, an input capacitor, and an output capacitor. The 0.6V minimum operating voltage enables operation from a nearly depleted single battery cell, while the 1V guaranteed startup ensures reliable initialization. The variable frequency PFM control scheme maintains high efficiency across the entire load range, from light load (µA range) to full load (hundreds of mA). The DTR suffix indicates TSSOP-8 tape and reel packaging.

Working Principle: L6920DTR Working Principle

The L6920DTR uses a pulse-frequency modulation (PFM) control scheme where the switching frequency varies with load current to maintain high efficiency across the full load range. When the output voltage drops below the regulation threshold, the N-channel MOSFET turns on and energy is stored in the external inductor (TON phase). After a maximum on time of 5 µs (or when the current limit of 1A is reached), the N-channel switch turns off and the P-channel synchronous rectifier turns on, transferring the inductor energy to the output (TOFF phase). The synchronous rectifier remains on until the inductor current drops to zero (discontinuous conduction mode) or the output voltage exceeds the regulation threshold. At light loads, the switching frequency naturally decreases, minimizing gate drive and switching losses. The integrated low-battery comparator monitors the input voltage through the LBI pin and asserts the open-drain LBO output when the voltage drops below the 1.23V threshold.

Pin Description: L6920DTR Pin Definition and Functions
Pin Name Function
1 FB Output voltage feedback (GND=5V, OUT=3.3V, or external divider)
2 LBI Low battery detect input (threshold=1.23V)
3 LBO Low battery detect output (open-drain, active-low)
4 REF 1.23V reference voltage output (bypass with 100nF)
5 SHDN Shutdown control (low=shutdown, high=operating)
6 GND Ground
7 LX Inductor connection (switch node)
8 OUT Power output and sense connection
Application Scenarios: In which products and applications is L6920DTR used

The L6920DTR excels in single-cell alkaline or NiMH battery applications where the 1V startup and 0.6V operating capability extract maximum energy from the battery. In GPS receivers, it provides a stable 3.3V supply from a single Li-ion cell. For digital cameras, the 5V output option powers CCD/CMOS sensor circuits from a 3.6V lithium battery. The low battery detection feature eliminates the need for a separate voltage monitor IC, reducing BOM count. In PDA and handheld devices, the 0.1 µA shutdown current preserves battery life during long idle periods.

Alternative Models: What chips are recommended as replacements for L6920DTR
Model Manufacturer Key Difference
L6920DC STMicroelectronics MSOP-8, 0.8V startup, up to 1MHz
TPS61070 Texas Instruments Similar boost, 1.8-5.5Vout, SC-70
MAX1724 Analog Devices 1.5V startup, SOT-23-5

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1