Opens in a new tab

STLQ50C33R

LDO regulator, 3.3V fixed, 50mA, 3.5µA Iq, 200mV dropout, 2.3-12Vin, SOT-323-5

7400

Effective Inventory

Image for reference only

Manufacturer Part:

STLQ50C33R

Package:

SOT-323-5 (2.0 x 1.25 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STLQ50C33R from STMicroelectronics is an ultra-low quiescent current LDO linear regulator providing a fixed 3.3V output at up to 50 mA from a 2.3V to 12V input. With just 3.5 µA typical quiescent current and 200 mV dropout at 25 mA, it is designed for battery-powered applications requiring long standby time in a compact SOT-323-5 package.

Key Specifications

  • Output Voltage: 3.3V fixed (±2%)
  • Input Voltage: 2.3V ~ 12V (at IO=20mA)
  • Output Current: 50 mA max
  • Dropout Voltage: 200 mV typ @ IO=25mA, 400 mV typ @ IO=50mA
  • Quiescent Current: 3.5 µA typ (VI=5V), 5 µA max
  • Line Regulation: 0.3%/V
  • Load Regulation: 0.15%/mA
  • PSRR: 30 dB @ 120 Hz
  • Output Noise: 560 µVRMS (200Hz-100kHz)
  • Thermal Protection: 160°C
  • Short Circuit Current: 500 mA
  • Operating Temperature: -40°C ~ +125°C
  • Package: SOT-323-5 (2.0 x 1.25 mm)
  • MSL: 1 (Unlimited)

Features

  • Ultra-low 3.5 µA quiescent current for extended battery life
  • Wide input voltage range up to 12V
  • Low 200 mV dropout at 25 mA
  • Internal thermal shutdown protection
  • Available in 1.8V, 2.5V, 3.3V, 5.0V and adjustable versions
  • PMOS pass element for low dropout
  • Stable with 1 µF output capacitor
  • Short-circuit protection

Applications

  • Portable and battery-powered equipment
  • Microcontroller power supply
  • Real-time clock backup
  • Electronic sensors
  • IoT node power management
Product Introduction: STLQ50C33R Product Introduction

The STLQ50C33R from STMicroelectronics is a BiCMOS low-dropout linear regulator optimized for ultra-low power consumption. The 3.5 µA typical quiescent current is achieved through a PMOS pass element design that eliminates the base current required by NPN or PNP pass element LDOs. This makes the device ideal for applications that spend most of their time in standby, where the quiescent current dominates the total power budget. The fixed 3.3V output with ±2% accuracy provides a reliable supply for microcontrollers and sensors. The wide 2.3V to 12V input range allows direct operation from single-cell Li-ion, multi-cell alkaline, or 12V industrial supplies. The SOT-323-5 package occupies minimal board space in compact designs.

Working Principle: STLQ50C33R Working Principle

The STLQ50C33R uses a PMOS pass transistor as the series element between input and output. The error amplifier compares a fraction of the output voltage (through an internal resistor divider) with the internal bandgap reference (1.23V), and drives the PMOS gate to maintain regulation. The PMOS pass element is key to the low quiescent current: unlike bipolar pass elements that draw base current proportional to load current, the PMOS gate draws essentially zero DC current. The dropout voltage is determined by the RDS(on) of the PMOS transistor and the load current (VDO = IO × RDS(on)), resulting in 200 mV at 25 mA. The internal thermal shutdown circuit monitors the junction temperature and turns off the pass element at 160°C, protecting the device from damage due to excessive power dissipation.

Pin Description: STLQ50C33R Pin Definition and Functions
Pin Name Function
1 IN Input voltage (2.3-12V)
2 GND Ground
3 EN Enable (active high, connect to IN for always-on)
4 NC/BP No connect or bypass capacitor for noise reduction
5 OUT Regulated 3.3V output
Application Scenarios: In which products and applications is STLQ50C33R used

The STLQ50C33R is ideal for IoT sensor nodes where the 3.5 µA quiescent current ensures months of battery life during sleep intervals between transmissions. For microcontroller power supplies, it provides a clean 3.3V rail from a single Li-ion cell (3.0-4.2V) with minimal dropout. As an RTC backup regulator, the ultra-low quiescent current preserves battery capacity during long power-off periods. In industrial sensor applications, the wide 12V input range allows direct connection to industrial supply rails without pre-regulation. The thermal shutdown and short-circuit protection provide robustness in field deployments.

Alternative Models: What chips are recommended as replacements for STLQ50C33R
Model Manufacturer Key Difference
STLQ50C18R STMicroelectronics 1.8V fixed output variant
TPS79933DDCR Texas Instruments 3.3V, 200mA, 1µA Iq, SOT-23-5
XC6219B332MR Torex 3.3V, 200mA, 0.8µA Iq, SOT-25

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1