Opens in a new tab

3296W-1-103LF

10kΩ 25-turn cermet trimmer potentiometer, 0.5W, top-adjust, through-hole J-hook, RoHS

11200

Effective Inventory

Image for reference only

Manufacturer Part:

3296W-1-103LF

Package:

Through-hole (9.53 x 9.53 x 4.83 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 3296W-1-103LF from Bourns is a 10 kΩ (10,000 Ω) cermet trimmer potentiometer with ±10% tolerance, 0.5W power rating, and 25-turn adjustment for precise resistance setting. It features a top-adjust configuration in a compact through-hole package with J-hook terminals, designed for industrial calibration and circuit tuning applications.

Key Specifications

  • Resistance: 10 kΩ (103 = 10 × 10³)
  • Tolerance: ±10%
  • Power Rating: 0.5W at 70°C
  • Maximum Voltage: 200V
  • Adjustment: 25 turns (multi-turn)
  • Adjustment Type: Top adjust
  • Resolution: Essentially infinite (cermet element)
  • Contact Resistance Variation: ≤2%
  • Insulation Resistance: ≥1000 MΩ at 500V DC
  • Dielectric Strength: 900V AC
  • Temperature Range: -55°C ~ +125°C
  • Temperature Coefficient: ±100 ppm/°C
  • Rotation Life: 200 cycles
  • Package: Through-hole, J-hook terminals
  • Compliance: RoHS (LF suffix)

Features

  • 25-turn precision adjustment for fine resolution
  • Cermet resistive element for stability
  • Top-adjust configuration for PCB-mounted access
  • Sealed construction for flux resistance
  • J-hook terminals for secure PCB mounting
  • RoHS-compliant lead-free version
  • Wide operating temperature range

Applications

  • Power supply output voltage calibration
  • Op-amp offset trimming
  • ADC/DAC reference voltage adjustment
  • Timer and oscillator frequency tuning
  • Sensor signal conditioning calibration
Product Introduction: 3296W-1-103LF Product Introduction

The 3296W-1-103LF from Bourns is a precision 25-turn cermet trimmer potentiometer with 10 kΩ resistance. The multi-turn design provides fine adjustment resolution that is impossible with single-turn trimmers — each full rotation changes the wiper position by only 4% of the total range. This makes the device ideal for applications requiring precise calibration, such as power supply voltage setpoints, op-amp offset nulling, and reference voltage trimming. The cermet (ceramic-metal) resistive element offers superior stability compared to carbon composition elements, with a temperature coefficient of ±100 ppm/°C and minimal drift over time and environmental exposure. The W variant features top-adjust access and J-hook terminals for secure through-hole PCB mounting. The LF suffix indicates RoHS-compliant lead-free construction.

Working Principle: 3296W-1-103LF Working Principle

The 3296W-1-103LF operates as a three-terminal variable voltage divider. The resistive element is a cermet (ceramic-metal composite) film deposited on a substrate in a helical pattern. A sliding contact (wiper) moves along the helical track when the adjustment screw is turned, changing the ratio between the wiper terminal and the two end terminals. The 25-turn adjustment mechanism uses a worm gear to translate the rotary motion of the adjustment screw into a slow linear progression of the wiper along the helical track. Each complete turn of the adjustment screw moves the wiper by approximately 1/25th of the total resistance range (about 400 Ω for a 10 kΩ unit), providing fine resolution. The cermet element provides a continuous (essentially infinite) resolution with no discrete steps, unlike digital potentiometers.

Pin Description: 3296W-1-103LF Pin Definition and Functions
Pin Name Function
1 CCW Counter-clockwise end terminal (minimum resistance)
2 Wiper Adjustable output (varies with screw position)
3 CW Clockwise end terminal (maximum resistance)
Application Scenarios: In which products and applications is 3296W-1-103LF used

The 3296W-1-103LF is widely used in power supply designs where the output voltage must be precisely calibrated during production test. By placing the trimmer in the feedback resistor divider, technicians can set the output voltage to within millivolts of the target. In op-amp circuits, the trimmer nulls input offset voltage for precision DC applications. For ADC/DAC circuits, the 10 kΩ range is ideal for adjusting the voltage reference to achieve full-scale accuracy. In timer circuits, the multi-turn resolution enables fine-tuning of oscillation frequency or time delay. The sealed construction prevents contamination during wave soldering and in harsh operating environments.

Alternative Models: What chips are recommended as replacements for 3296W-1-103LF
Model Manufacturer Key Difference
3296W-1-503LF Bourns 50 kΩ version
3386W-1-103LF Bourns Same 10kΩ, smaller package
PV36W103C01B00 Murata 10kΩ, 12-turn, similar footprint

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1