Opens in a new tab

PMF170XP

P-CH Trench MOSFET, -20V, -1A, 200mΩ Ron, logic-level, 2.6nC Qg, SOT-323 (SC-70)

11600

Effective Inventory

Image for reference only

Manufacturer Part:

PMF170XP

Package:

SOT-323 (SC-70)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PMF170XP from Nexperia (formerly NXP) is a 20V P-channel Trench MOSFET with 200 mΩ max on-resistance at VGS=-4.5V and -1A continuous drain current in a SOT-323 (SC-70) package. Designed for low-voltage load switching and relay driving in space-constrained applications.

Key Specifications

  • Channel Type: P-Channel (enhancement mode)
  • VDS: -20V
  • VGS: ±12V
  • ID: -1A (TA=25°C), -0.7A (TA=100°C)
  • IDM: -4A (pulsed, tp≤10µs)
  • RDS(on): 175 mΩ typ, 200 mΩ max @ VGS=-4.5V, ID=-1A
  • RDS(on): 300 mΩ max @ VGS=-2.5V
  • VGS(th): -0.9V typ (ID=-1mA)
  • Qg: 2.6 nC typ @ VGS=-4.5V
  • Qgd: 0.53 nC typ
  • Ciss: 280 pF typ
  • Coss: 43 pF typ
  • PTOT: 290 mW (TA=25°C)
  • Rth(j-a): 377 K/W typ (standard footprint)
  • Operating Temperature: -55°C ~ 150°C
  • Package: SOT-323 (SC-70)
  • Marking: XD%

Features

  • Low 200 mΩ RDS(on) at VGS=-4.5V
  • Very fast switching with 2.6 nC gate charge
  • Trench MOSFET technology for low on-resistance
  • Logic-level gate drive compatible
  • Ultra-small SOT-323 (SC-70) package
  • Low threshold voltage for direct MCU drive

Applications

  • Relay driver
  • High-speed line driver
  • High-side load switch
  • Battery management switching
  • Logic-level signal routing
Product Introduction: PMF170XP Product Introduction

The PMF170XP from Nexperia is a small-signal P-channel Trench MOSFET in an ultra-compact SOT-323 (SC-70) package. The device offers 200 mΩ maximum on-resistance at VGS=-4.5V with only 2.6 nC total gate charge, providing an excellent figure of merit for low-voltage load switching applications. The -0.9V typical threshold voltage enables direct drive from 1.8V and 3.3V microcontrollers. The Trench MOSFET technology delivers low specific on-resistance in the tiny 2.0 x 1.25 mm package footprint, making it ideal for space-constrained portable and wearable applications. The PMF170XP complements the NX3008NBK N-channel device for complementary pair designs in half-bridge or push-pull configurations.

Working Principle: PMF170XP Working Principle

The PMF170XP uses Nexperia’s Trench MOSFET technology where vertical trenches are etched into the silicon and lined with gate oxide and polysilicon to form the gate electrode. The trench structure creates a high cell density with short channel lengths, minimizing the channel resistance component of RDS(on). As a P-channel device, current flows from source to drain when the gate voltage is pulled below the source potential (negative VGS), creating an inversion layer of holes in the N-type body region. The low threshold voltage (-0.9V typical) is achieved through careful channel doping control, allowing full enhancement at VGS=-2.5V. The 2.6 nC total gate charge ensures fast switching with minimal drive power, making the device suitable for PWM-controlled load switching at frequencies up to several hundred kHz.

Pin Description: PMF170XP Pin Definition and Functions
Pin Name Function
1 Gate Gate terminal (logic-level drive)
2 Source Source terminal
3 Drain Drain terminal (connects to load)
Application Scenarios: In which products and applications is PMF170XP used

The PMF170XP is used as a high-side load switch in battery-powered devices where the P-channel configuration eliminates the need for a charge pump. In relay driving applications, the 1A current rating and 200 mΩ RDS(on) provide efficient coil switching with minimal voltage drop. For high-speed line driving, the 2.6 nC gate charge enables fast transitions. In complementary pair configurations with an N-channel MOSFET, it forms a half-bridge for bidirectional motor control or push-pull signal driving. The SC-70 package is ideal for wearable devices and other ultra-compact designs where board space is at a premium.

Alternative Models: What chips are recommended as replacements for PMF170XP
Model Manufacturer Key Difference
PMF170XN Nexperia N-channel version, 20V, 1A, 200mΩ
NX3008NBK Nexperia N-channel, 30V, 400mA, SOT-23
BSS84,215 Nexperia P-channel, -50V, -130mA, SOT-23

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1