Opens in a new tab

LT1764AEQ-3.3

3A LDO regulator, fixed 3.3V, 340mV dropout, 40µVRMS noise, 2.7-20V input, D2PAK-5

4200

Effective Inventory

Image for reference only

Manufacturer Part:

LT1764AEQ-3.3

Package:

D2PAK-5 (DD-Pak, TO-263-5)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LT1764AEQ-3.3 from Analog Devices is a 3A low-noise low-dropout (LDO) linear regulator with a fixed 3.3V output, 340mV dropout voltage at 3A, and only 40µVRMS output noise. Operating from 2.7V to 20V input, it is optimized for fast transient response and features controlled quiescent current that does not rise in dropout, in a 5-lead D2PAK (DD-Pak) surface-mount package.

Key Specifications

  • Output Type: Fixed 3.3V (±3.5%)
  • Output Current: 3A
  • Input Voltage: 2.7V ~ 20V
  • Dropout Voltage: 340mV typical @ 3A
  • Output Noise: 40µVRMS (10Hz~100kHz, COUT=10µF)
  • Quiescent Current: 1mA (operating), <1µA (shutdown)
  • PSRR: 63dB
  • Current Limit: 3.1A minimum, 4A typical
  • Line Regulation: 0.02%/V
  • Load Regulation: 0.02%
  • Operating Temperature: -40°C ~ 125°C
  • Package: D2PAK-5 (DD-Pak, TO-263-5)
  • Minimum Output Capacitor: 10µF (ceramic, tantalum, or aluminum)

Features

  • Ultra-low 40µVRMS output noise for sensitive RF applications
  • Fast transient response optimized design
  • Controlled quiescent current — does not increase in dropout
  • Shutdown mode draws <1µA
  • Reverse battery protection — no external diode needed
  • Reverse current protection
  • Thermal shutdown and current limit protection
  • Stable with 10µF ceramic output capacitor

Applications

  • 3.3V to 2.5V logic power supply conversion
  • Post-regulator for switching power supplies
  • RF and wireless power supply
  • High-speed digital circuit supply
  • Battery-powered instruments
Product Introduction: LT1764AEQ-3.3 Product Introduction

The LT1764AEQ-3.3 from Analog Devices is a 3A low-dropout linear regulator optimized for fast transient response and ultra-low output noise. The fixed 3.3V output version provides a complete power solution for noise-sensitive RF and high-speed digital circuits. The 340mV dropout voltage at full 3A load enables efficient regulation from a 3.3V input to a 2.5V output or from a 5V input to a 3.3V output. Unlike many LDO regulators, the LT1764A maintains well-controlled quiescent current even in dropout, preventing excessive power dissipation. The 40µVRMS output noise (10Hz to 100kHz) makes it ideal for powering sensitive RF circuits such as VCOs, PLLs, and mixers where supply noise directly impacts phase noise and spurious performance. The AEQ-3.3 suffix indicates the D2PAK-5 package with fixed 3.3V output.

Working Principle: LT1764AEQ-3.3 Working Principle

The LT1764AEQ-3.3 uses a PNP pass transistor in a common-emitter configuration, which allows the dropout voltage to be defined by the VCE(sat) of the pass transistor rather than the gate drive voltage required by PMOS-based LDOs. The 340mV dropout is the saturation voltage of the PNP transistor at 3A. The error amplifier compares a fraction of the output voltage (sensed through the SENSE pin) with an internal 1.21V bandgap reference, driving the base of the PNP pass transistor to maintain regulation. The internal noise reduction pin (NR) can be bypassed with a capacitor to filter the bandgap reference noise, reducing the output noise to 40µVRMS. The fast transient response is achieved through a wideband error amplifier and careful compensation. The SHDN pin disables the device, reducing supply current to <1µA. The reverse battery protection circuit prevents damage when the input voltage is reversed, eliminating the need for an external protection diode.

Pin Description: LT1764AEQ-3.3 Pin Definition and Functions
Pin Name Function
1 SHDN Shutdown control (high=on, low=shutdown, <1µA)
2 IN Input supply (2.7V~20V, bypass with 10µF)
3 GND Ground (tab and pin)
4 OUT Regulated 3.3V output (bypass with 10µF min)
5 SENSE Output voltage sense (connect to load for remote sensing)
Application Scenarios: In which products and applications is LT1764AEQ-3.3 used

The LT1764AEQ-3.3 is commonly used as a post-regulator after a switching converter, where the low 40µVRMS noise cleans up the switching ripple that would otherwise degrade sensitive analog circuit performance. In RF transceivers, it powers VCOs and PLLs where supply noise directly translates to phase noise. For 3.3V to 2.5V conversion, the 340mV dropout allows regulation with minimal headroom. In battery-powered instruments, the <1µA shutdown current preserves battery life during sleep modes. The reverse battery protection eliminates the Schottky diode that would otherwise be needed, reducing forward drop and cost.

Alternative Models: What chips are recommended as replacements for LT1764AEQ-3.3
Model Manufacturer Key Difference
LT1764AEQ Analog Devices Adjustable version, 1.21V~20V output
LT1764AEQ-2.5 Analog Devices Fixed 2.5V version
LT1764AEQ-1.5 Analog Devices Fixed 1.5V version

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1